Official Distributor
SKU
MPN
REL-MR- 24DC/ 1ICT
Weight
0.017 kg
Series REL-MR
REL-MR- 24DC/ 1ICT - Single relay
Pluggable miniature power relay, with tungsten pre-contact for high switch-on currents up to 800 A peaks, 1 N/O contact, input voltage: 24 V DC
- Safe isolation between coil and contact side
- High degree of protection up to RT III depending on type (wash-proof)
- Power contacts up to 16 A
Technical Specifications
Product properties
Operating mode | 100% operating factor |
Mechanical service life | 3x 107 cycles |
Insulation characteristics
Insulation | Safe isolation, reinforced insulation |
Insulation | Safe isolation, reinforced insulation |
Overvoltage category | III |
Pollution degree | 3 |
Electrical properties
Maximum power dissipation for nominal condition | 0.41 W |
Test voltage (Winding/contact) | 5 kV AC (50 Hz, 1 min., winding/contact) |
Rated Insulation Voltage | 250 V AC |
Rated surge voltage | 6 kV |
Coil side
Nominal input voltage UN | 24 V DC |
Input voltage range | 19.2 V DC ... 54 V DC |
Input voltage range in reference to UN | see diagram |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 17 mA |
Typical response time | 8 ms |
Typical release time | 3 ms |
Coil resistance | 1440 Ω ±10 % (20 °C) |
Switching
Contact switching type | 1 N/O contact |
Type of switch contact | Single contact |
Contact Material | AgSnO |
Maximum Switching Voltage | 250 V AC/DC |
Minimum Switching Voltage | 12 V (100 mA) |
Limiting Continuous Current | 16 A |
Maximum Inrush Current | 165 A (20 ms) |
Maximum Inrush Current | 800 A (200 µs) |
Min. switching current | 100 mA (at 12 V DC) |
Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 58 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 48 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 50 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 80 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 4000 VA (for 250 V AC) |
Switching capacity min. | 1200 mW |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.2 A (at 110 V, DC13) |
Switching capacity | 0.2 A (at 250 V, DC13) |
Switching capacity | 6 A (at 24 V, AC15) |
Switching capacity | 6 A (at 120 V, AC15) |
Switching capacity | 6 A (at 250 V, AC15) |
Connection data
Connection Method | Plug / solder connection |
Dimensions
Width | 12.7 mm |
Height | 29 mm |
Depth | 15.7 mm |
Material specifications
Color | white (RAL 9010) |
Ambient conditions
Degree of Protection | RT II |
Ambient Temperature (Operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 2000 m |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
Standards and Regulations
Standards/regulations | EN 50178 |
Standards/regulations | EN 61810-1 |
Mounting
Mounting Type | Plug-in mounting |
Assembly instructions | Can be aligned without spacing (> 70 °C ≥ 2.5 mm) |
Mounting Position | any |
Why Proax for Phoenix Contact 2987338?
Proax is an authorized distributor of Phoenix Contact 2987338 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended