Official Distributor
SKU
MPN
REL-MR- 24DC/21AU/MS
Weight
0.007 kg
This product is Not Cancellable/Not Returnable
Series REL-MR
REL-MR- 24DC/21AU/MS - Single relay
Plug-in miniature power relay, with multi-layer gold contact, 1 changeover contact, manual operation, 24 V DC input voltage
Technical Specifications
Product properties
Operating mode | 100% operating factor |
Mechanical service life | 1x 107 cycles |
Insulation characteristics
Overvoltage category | III |
Pollution degree | 3 |
Electrical properties
Maximum power dissipation for nominal condition | 0.17 W |
Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
Coil side
Nominal input voltage UN | 24 V DC |
Input voltage range | 14.4 V DC ... 66 V DC |
Input voltage range in reference to UN | see diagram |
Drive and function | monostable |
Drive (polarity) | non-polarized |
Typical input current at UN | 7 mA |
Typical response time | 5 ms |
Typical release time | 2.5 ms |
Coil resistance | 3390 Ω ±10 % (at 20 °C) |
Switching
Contact switching type | 1 changeover contact |
Type of switch contact | Single contact |
Contact Material | AgSnO, hard gold-plated |
Maximum Switching Voltage | 30 V AC |
Maximum Switching Voltage | 36 V DC |
Minimum Switching Voltage | 100 mV (at 10 mA) |
Limiting Continuous Current | 50 mA |
Maximum Inrush Current | 50 mA |
Min. switching current | 1 mA (at 24 V) |
Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
Motor load according to UL 508 | 1/4 HP, 240 - 277 V AC (N/O contact) |
Motor load according to UL 508 | 1/6 HP, 240 - 277 V AC (N/C contact) |
Switching: when the gold layer is destroyed
Note | the following values are applicable if a gold layer is destroyed |
Contact Material | AgSnO |
Maximum Switching Voltage | 250 V AC |
Minimum Switching Voltage | 5 V (at 100 mA) |
Limiting Continuous Current | 6 A |
Min. switching current | 10 mA (at 12 V) |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
Interrupting rating (ohmic load) max. | 20 W (at 48 V DC) |
Interrupting rating (ohmic load) max. | 18 W (at 60 V DC) |
Interrupting rating (ohmic load) max. | 23 W (at 110 V DC) |
Interrupting rating (ohmic load) max. | 40 W (at 220 V DC) |
Interrupting rating (ohmic load) max. | 1500 VA (for 250 V AC) |
Switching capacity | 2 A (at 24 V, DC13) |
Switching capacity | 0.2 A (at 110 V, DC13) |
Switching capacity | 0.1 A (at 220 V, DC13) |
Switching capacity | 3 A (at 24 V, AC15) |
Switching capacity | 3 A (at 120 V, AC15) |
Switching capacity | 3 A (at 230 V, AC15) |
Connection data
Connection Method | Plug / solder connection |
Dimensions
Width | 5 mm |
Height | 28 mm |
Depth | 16 mm |
Material specifications
Color | white (RAL 9010) |
Ambient conditions
Degree of Protection | RT II |
Ambient Temperature (Operation) | -40 °C ... 85 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Corrosive gas test
Identification | ISA-S71.04. G3 Harsh Group |
Identification | EN 60068-2-60 |
Standards and Regulations
Standards/regulations | IEC 60664 |
Standards/regulations | EN 50178 |
Standards/regulations | EN 61810-1 |
Mounting
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Why Proax for Phoenix Contact 2909645?
Proax is an authorized distributor of Phoenix Contact 2909645 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 10 |
Recommended