Official DistributorSKU
MPN
VAL-MS-T1/T2 1000DCPV-UD-ST
Weight
0.095 kg
Series VAL-MS-T1
VAL-MS-T1/T2 1000DCPV-UD-ST - Type 1/2 surge protection plug
Replacement plug for PV arrester combinations from the VAL-MS-T1/T2 1000DC-PV-... product range
Technical Specifications
Product properties
| Product family | VALVETRAB MS |
| IEC test classification | PV T1 |
| IEC test classification | PV T2 |
| EN type | T1 / T2 |
| IEC power supply system | DC |
| Type | Male |
| Number of Positions | 1 |
| Installation location | Interior |
| Installation location of the disconnect device | Internal |
| Accessibility | Accessible |
| SPD failure behavior | OCFM (Open-Circuit Failure Mode) |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Indicator/remote signaling
| Max. required back-up fuse | not required |
Connection data
| Connection Method | pluggable |
Dimensions
| Width | 17.5 mm |
| Height | 52.4 mm |
| Depth | 55.3 mm |
| Horizontal pitch | 1 Div. |
Material specifications
| Color | black (RAL 9005) |
| Color | black (RAL 9005) |
| Flammability rating according to UL 94 | V-0 |
| CTI value of material | 600 |
| Insulating material | PA 6.6-FR |
| Material group | I |
| Housing Material | PA 6.6-FR |
Protective circuit
| Direction of action | (L+)-PE & (L-)-PE & (L+)-(L-) |
| Standby power consumption PC | ≤ 25.00 mVA |
| Nominal discharge current In (8/20) µs | 15 kA |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Impulse discharge current (10/350) µs, charge | 2.5 As |
| Impulse discharge current (10/350) µs, specific energy | 6.25 kJ/Ω |
| Impulse discharge current (10/350) µs, peak value limp | 5 kA |
| Voltage protection level Up | ≤ 1.8 kV |
| Residual voltage Ures | ≤ 1.8 kV (at In) |
| Residual voltage Ures | ≤ 1.5 kV (at 5 kA) |
| Residual voltage Ures | ≤ 1.7 kV (at 10 kA) |
| Residual voltage Ures | ≤ 1.9 kV (at 20 kA) |
| Residual voltage Ures | ≤ 2.2 kV (at 30 kA) |
| Residual voltage Ures | ≤ 2.4 kV (at 40 kA) |
| Response time tA | ≤ 25 ns |
Protective circuit DC voltage side (DC)
| Open circuit voltage UOCSTC | ≤ 487.5 V DC |
| Maximum discharge current Imax (8/20) µs | 40 kA |
| Response time tA | ≤ 25 ns |
| Impulse discharge current (10/350) µs, charge | 2.5 As |
| Impulse discharge current (10/350) µs, specific energy | 6.25 kJ/Ω |
| Impulse discharge current (10/350) µs, peak value limp | 5 kA |
| Insulation resistance Riso | > 5 GΩ (at 500 V DC) |
| Nominal discharge current In (8/20) µs | 15 kA |
| Continuous operating current ICPV | < 20 µA |
| Maximum continuous operating voltage UCPV | 585 V DC |
| Short-circuit current rating ISCPV | 2000 A |
| Residual voltage Ures | ≤ 1.8 kV (at In) |
| Residual voltage Ures | ≤ 1.5 kV (at 5 kA) |
| Residual voltage Ures | ≤ 1.7 kV (at 10 kA) |
| Residual voltage Ures | ≤ 1.9 kV (at 20 kA) |
| Residual voltage Ures | ≤ 2.2 kV (at 30 kA) |
| Residual voltage Ures | ≤ 2.4 kV (at 40 kA) |
| Voltage protection level Up | ≤ 1.8 kV |
| Standby power consumption PC | ≤ 25.00 mVA |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (Operation) | 7.5g (5-500 Hz/2.5 h/XYZ) |
UL specifications
| Maximum continuous operating voltage MCOV (L+) - G | 1050 V DC |
| Nominal discharge current In (L+) - G | 20 kA |
| Mode of protection | (L+) - G |
| Nominal Voltage | 875 V DC |
| Power distribution system | Single phase |
| Measured limiting voltage MLV (L+) - G | 1900 V |
| SPD Type | 4CA |
Standards and Regulations
| Standards/specifications | EN 61643-31 |
| Note | 2019 |
| Standards/specifications | IEC 61643-31 |
| Note | 2018 |
Mounting
| Mounting Type | on base element |
Accessories
Why Proax for Phoenix Contact 2801231?
Proax is an authorized distributor of Phoenix Contact 2801231 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 10 |
Recommended
2800675 - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE).
2800674 - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
2800672 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with common N and PE (4-conductor system: L1, L2, L3, PEN), with remote indication contact.
2800670 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with remote indication contact.
Parasurtenseur / parafoudre universel enfichable basé sur une varistance pour réseaux monophasés avec N et PE communs (système à 2 fils : L1, PEN).
2801042 - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with common N and PE (2-conductor system: L1, PEN), with remote indication contact.- 2800187 - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE).
2800186 - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
2800189 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with common N and PE (4-conductor system: L1, L2, L3, PEN).
2800188 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with common N and PE (4-conductor system: L1, L2, L3, PEN), with remote indication contact.
2800184 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV.
2800183 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with remote indication contact.
2800645 - Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE).
2800644 - Plug-in varistor-based lightning current arrester for 3-phase TN-S power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), for Lightning Protection Levels III and IV, with remote indication contact.
