Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PV-CF-C-HSG
Weight
0.01 kg

PV-CF-C-HSG - Photovoltaic connector

Photovoltaic connector, Range of articles: SUNCLIX, housing material: PPE, color: black, number of positions: 1, min. conductor cross section: 2.5 mm2, max. conductor cross section: 6 mm2, rated voltage: 1500 V, rated current: 20 A, Connection method: Crimp, Contact connection type: Socket, min. cable diameter: 5.5 mm, max. cable diameter: 8 mm

  • High-quality materials ensure a high degree of reliability and long-term stability
  • Maximum system efficiency with proven, low-loss SUNCLIX contacts
  • International approvals enable worldwide use
Technical Specifications

Safety note

Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product
Safety note• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
Safety note• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Safety note• Operate the connector only when it is fully plugged in and interlocked.
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product properties

Product familySUNCLIX
Number of Positions1

Insulation characteristics

Protection classII
Degree of pollution2

Electrical properties

Rated voltage (II/2)1000 V
Rated voltage (III/2)1500 V
Nominal voltage ATD1500 V
Rated surge voltage16 kV
Rated surge voltage (II/2)12 kV
Rated surge voltage (III/2)12 kV
Rated surge voltage (III/3)16 kV
Rated current (2.5 mm²)20 A
Rated current (4.0 mm²)30 A
Rated current (6.0 mm²)35 A
Contact resistance≤ 0.45 mΩ
Contact resistance< 0.3 mΩ (Crimp contact/crimp contact)

Connection data

Connection MethodCrimp
Stripping length8 mm
Tightening torque3 ... 3.2 Nm

Dimensions

Width23.6 mm
Height23.6 mm
Length72.8 mm

Material specifications

Colorblack
Color of the housing partblack
Flammability rating according to UL 94V0
Insulating material groupII
Insulating materialmPPE
Contact surfaceSilver Ag
Housing MaterialPPE
Cable seal materialEPDM
Contact MaterialCu
Contact surface materialAg
Contact carrier materialPPE
O-ring materialSilopren LSR 2660
Material for screw connectionPPE

Cable/line

Cable TypeH1Z2Z2-K lines
External Cable Diameter5.5 mm ... 8 mm
External Cable Diameter5.5 mm ... 8 mm
Single wire, cross section2.5 mm² 6 mm²
Cable pull-out force> 80 N (IEC 62852:2014)

Mechanical properties

Outside conductor diameter5.50 mm 8.00 mm

Mechanical data

Outside conductor diameter5.50 mm 8.00 mm
Insertion/withdrawal cycles100
Insertion force45 N ±10 N
Withdrawal force250 N ±50 N (when locked)

Ambient conditions

Degree of protection (when plugged in)IP66 / IP68 (2 m / 24 h)
Degree of ProtectionIP66 / IP68 (2 m / 24 h)
Ambient Temperature (Operation)-40 °C ... 85 °C
Ambient temperature (assembly)-25 °C ... 50 °C

Why Proax for Phoenix Contact 1622661?

Proax is an authorized distributor of Phoenix Contact 1622661 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size500
Recommended
Sold in quantities of 500

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability