Official DistributorSKU
MPN
IB IL CNT
Weight
0.154 kg
IB IL CNT - Inline function terminal
Inline counter terminal, without accessories, 1 counter input, 1 control input, 1 output, 24 V DC, 500 mA, 3-conductor connection technology
Technical Specifications
Product properties
| Type | modular |
| Type | Inline |
| Operating mode | Process data operation with 2 words |
| Diagnostics messages | Sensor supply short-circuit |
| Diagnostics messages | Sensor supply overload |
Module
| ID code (dec.) | 191 |
| ID code (hex) | BF |
| Length code (hex) | 02 |
| Length code (dec) | 02 |
| Process data channel | 32 bit |
| Input address area | 4 Byte |
| Output address area | 4 Byte |
| Register length | 4 Byte |
| Required parameter data | 1 Byte |
| Required configuration data | 5 Byte |
Potentials: Communications power (UL)
| Supply Voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 50 mA |
| Current draw | typ. 40 mA |
| Power consumption | max. 0.375 W (at UL) |
Potentials: Segment circuit supply (US)
| Supply Voltage | 24 V DC (via voltage jumper) |
| Current draw | max. 1 A |
Supply:
| Designation | Power supply for sensors |
| Supply Voltage | 24 V DC (generated from segment supply US) |
Electrical isolation/isolation of the voltage ranges
| Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min. |
Counter:
| Input name | Counter input for 24 V signals |
| Connection Method | Spring-cage connection |
| Connection technology | 2-, 3-conductor |
| Number of Inputs | 1 (only one counter input can be used, either for 24 V or for 5 V signals) |
| Operating mode | Event counting, frequency/time measurement |
| Input Voltage | 24 V DC (Nominal voltage) |
| Input Voltage | 30 V DC (maximum) |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Input Frequency | max. 100 kHz |
| Input Current | typ. 5 mA |
| Input resistance | approx. 5.7 kΩ |
| Input name | Counter input for 5 V signals |
| Connection Method | Spring-cage connection |
| Connection technology | 2-conductor (shielded), external 5 V supply |
| Number of Inputs | 1 (only one counter input can be used, either for 24 V or for 5 V signals) |
| Operating mode | Event counting, frequency/time measurement |
| Input Voltage | 5 V DC (Nominal voltage) |
| Input Voltage | 8 V DC (maximum) |
| Input voltage range "0" signal | 0 V ... 1.5 V |
| Input voltage range "1" signal | 3.5 V ... 8 V |
| Input Frequency | max. 100 kHz |
| Input Current | typ. 5 mA |
| Input resistance | approx. 1.7 kΩ |
Digital:
| Output name | Switching output |
| Connection Method | Spring-cage connection |
| Connection technology | 2-conductor |
| Number of Outputs | 1 |
| Protective circuit | Short-circuit protection; Yes, short-circuit-proof (automatically switched on again) |
| Protective circuit | Overload protection |
| Output Voltage | 24 V DC (Nominal voltage) |
| Output Current | max. 0.5 A (Nominal current) |
| Nominal load, inductive | max. 12 VA (1.2 H, 48 Ω) |
| Nominal load, lamp | max. 12 W |
| Nominal load, ohmic | max. 12 W (48 Ω) |
| Reverse voltage resistance to short pulses | Reverse voltage proof |
| Behavior in the event of ohmic overload | Auto restart after eliminating the overload |
| Behavior with inductive overload | Output can be destroyed |
| Behavior in the event of lamp overload | Auto restart after eliminating the overload |
| Overcurrent shut-down | min. 0.7 A |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline local bus
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps |
| Transmission physics | Copper |
Diagnostic messages
| Diagnostics | Sensor supply short-circuit |
| Diagnostics | Sensor supply overload |
Dimensions
| Width | 24.4 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
Material specifications
| Color | green |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (according to DIN EN 61131-2) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting Type | DIN rail mounting |
Why Proax for Phoenix Contact 2836337?
Proax is an authorized distributor of Phoenix Contact 2836337 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2861852 - Inline counter terminal, complete with accessories (connector and marking fields), 1 counter input, 1 control input, 1 output, 24 V DC, 500 mA, 3-conductor connection technology- 2702134 - Inline, Function terminal, Counter input for 24 V signals: 1, Control input for 24 V signals: 1, Switching output: 1, 24 V DC, 0.5 A, Extreme conditions version, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
2700196 - Inline CAN master, for connecting a CAN bus system, complete with accessories (connector and marking field)- 2701160 - Inline function terminal, version for extreme conditions, for connecting a CAN bus system, complete with accessories (connector and labeling field)
2742696 - Inline digital output terminal, without accessories, 4 outputs, 12 to 253 V AC, 1 A, 3-conductor connection technology
2836748 - Inline digital output terminal, without accessories, 1 output, 12 to 253 V AC, 500 mA, 3-conductor connection method
2861920 - Inline, Digital output terminal, Digital outputs: 1, 230 V AC, connection technology: 3-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
