2814841
Official DistributorSKU
PHX2814841
MPN
MCR-SL-1CLP-I-I-00-4KV
Weight
0.103 kg
MCR-SL-1CLP-I-I-00-4KV - Loop-powered isolators
MCR loop-powered isolator for the electrical isolation of current signals without auxiliary power, input signal: 0(4) ... 20 mA, output signal: 0(4) ... 20 mA
- 0/4 ... 20 mA current signals
- Electrical isolation without additional auxiliary voltage
- Safe isolation
Technical Specifications
Product properties
| No. of channels | 1 |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Electrical isolation between input and output | yes |
| Limit frequency (3 dB) | < 75 Hz (at I = 20 mA and maximum load) |
| Maximum power dissipation for nominal condition | 50 mW |
| Test voltage input/output | 4 kV AC (50 Hz, 60 s) |
| Signal transmission behavior | In = Out |
| Step response (10-90%) | 5 ms (with 500 Ω load) |
| Maximum temperature coefficient | ≤ 0.002 %/K (of measured value / 100 Ω load) |
| Maximum transmission error | ≤ 0.1 % (of final value) |
| Additional error, load-dependent | 0.02 % (of measured value / 100 Ω load) |
Supply
| Supply Voltage Range | no separate supply voltage necessary |
Signal
| Description of the input | Current input |
| Number of Inputs | 1 |
| Configurable/programmable | no |
| Max. voltage input signal | 30 V (30 V overload) |
| Current Input Signal | 0 mA ... 20 mA |
| Current Input Signal | 4 mA ... 20 mA |
| Max. current input signal | 50 mA (100 mA overload) |
| Response current | < 50 µA |
| Input voltage limitation | 33 V 5 % (with Zener diode) |
| Voltage dissipation | 2.5 V (I = 20 mA) |
Signal: Current
| Number of Outputs | 1 |
| Configurable/programmable | no |
| Current Output Signal | 0 mA ... 20 mA |
| Current Output Signal | 4 mA ... 20 mA |
| Max. current output signal | < 50 mA |
| Load/Output Load Current Output | ≤ 1375 Ω (at I = 20 mA output signal) |
| Ripple | < 5 mV (rms) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
Dimensions
| Width | 12.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -10 °C ... 70 °C |
CE
| Certificate | CE-compliant |
UL, USA/Canada
| Identification | cULus |
Standards and Regulations
| Standards/regulations | DIN EN 61010-1 |
| Standards/regulations | VDE 0100-410 |
| Standards/regulations | VDE 0106-101 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2814841?
Proax is an authorized distributor of Phoenix Contact 2814841 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MCR-SL-CUC-100-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 100 A input current, 4 ... 20 mA output
MCR-SL-CUC-100-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 100 A input current, 0 ... 10 V output
MCR-SL-CUC-200-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 200 A input current, 4 ... 20 mA output
MCR-SL-CUC-200-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 200 A input current, 0 ... 10 V output
MCR-SL-CUC-300-I - Universal current transducer, for measuring AC, DC, and distorted currents, 0 ... 300 A input current, 4 ... 20 mA output
MCR-SL-CUC-300-U - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 300 A input current, 0 ... 10 V output
MCR-SL-CUC-400-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 400 A input current, 4 ... 20 mA output
MCR-SL-CUC-500-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 500 A input current, 4 ... 20 mA output
MCR-SL-CUC-600-I - Universal current transducer, for measuring DC, AC, and distorted currents, 0 ... 600 A input current, 4 ... 20 mA output
MCR-SL-D-PT100 - MCR digital display, for measuring temperatures, PT resistance thermometer / 5-fig. display
Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display
MCR-SL-D-FIT - MCR digital display, for measuring and displaying frequencies, pulses and times, 6-fig. display- MCR-SL-D-TE-JK - MCR digital display, for measuring temperatures, thermocouples / 5-fig. display
MCR-SL-D-U-I - MCR digital display, for measurement and display of standard signals, 5-fig. display
MCR-SL-HT-PT 100-I - Measurement and control temperature transducer, for resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. For Pt 100 resistance temperature detectors.
MCR-SL-PT100-LP-I, MCR temperature transducers: programmable loop-powered temperature transducers for Pt 100 resistance thermometers
MCR temperature transducer for Pt 100, 2, 3, or 4-wire system, input -100 °C...600 °C, output signal 0(4) mA ... 20 mA
MCR-SL-S-400-I-LP - MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...400 A, loop-powered output with 4...20 mA
