Official DistributorSKU
1.65 in. (42mm) Stepper Motor with Absolute Mechanical Encoder
The AlphaStep AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
- Requires AlphaStep AZ Series Driver
Technical Specifications
| Frame Size | 1.65 in |
| Motor Length | 5.24 in. |
| Driver Voltage Input Power | AC |
| Holding Torque | 495 oz-in |
| Holding Torque at Motor Standstill | 496 oz-in |
| Holding Torque at Standstill Electromagnetic Brake | 496 oz-in |
| Type | Absolute Mechanical Encoder |
| Shaft/Gear Type | Harmonic Gear |
| Gear Ratio (X:1) | 50 :1 |
| Lost Motion | 1.5 arc min or less |
| Shaft | Single |
| Electromagnetic Brake | Equipped |
| Connection Type | Cable |
| Resolution (Resolution Setting: 1000 P/R) | 0.0072 °/Pulse |
| Permissible Speed Range (r/min) | 0 ~ 70 |
| Rotor Inertia | 0.48 oz-in² |
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | UL |
| CE Marking | Low Voltage Directives |
| Insulation Class | Class B [130ºC (266ºF)][Recognized as 105 (A) by UL.] |
| Insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the following places:Case - Motor and sensor windings |
| Dielectric strength | Sufficient to withstand the following for 1 minute:Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
| Ambient Temperature | 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Degree of Protection | IP66 (excluding the mounting surface and connector) |
| Stop Position Accuracy | ±4 arc minutes (±0.067º) |
| Shaft Runout | 0.05 mm (0.002 in.) T.I.R. |
| Concentricity | 0.075 mm (0.003 in.) T.I.R. |
| Perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| Permissible Overhung Load | 0 in. from Shaft End = 40 lb |
| Permissible Axial Load | 49 lb |
| Brake Type | Active when the power is off |
| Controller Power Supply | 24 VDC ±5%, 0.1A |
| Power consumption | 2W |
| Excitation Current | 0.08A |
Why Proax for Oriental Motor AZM46MC-HS50?
Proax is the authorized distributor of Oriental Motor AZM46MC-HS50. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | AZM46MCHS50 |
| Pack Size | 1 |
Recommended
1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
- 1.65 in. (42 mm) Stepper Motor with Absolute Mechanical Encoder with Right-Angle FC Gearhead
