CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
Cart
Phoenix Contact 2800419
AllCircuit ProtectionProtectionSurge Protection

2800419

Official Distributor

By Phoenix Contact

SKU
PHX2800419
MPN
PWT 35-800AC-FM
Weight
3.5 kg
This product is Not Cancellable/Not Returnable
Series PWT

PWT 35-800AC-FM - Lightning/surge arrester type 1/2

Lightning/surge arrester, according to type 1/2 / class I/II, for 1-phase power supply networks with combined PE and N installed in one conductor (L1, PEN).

  • Use in harsh environments with robust design
  • Universal solution for various network types
  • Function monitoring using optical status indicator
  • Multi-stage status monitoring via remote indication contact
Technical Specifications

General

NoteAssembling: Two 8 mm screws with 8 Nm on an isolated or grounded surface
NoteLong-wave surge current 2 ms in accordance with IEC 60099-4: 250 x 1.0 kA; 500 x 0.5 kA.

Product properties

Product familyPOWERTRAB
IEC test classificationI / II
IEC test classificationT1 / T2
EN typeT1 / T2
IEC power supply systemTN-C
IEC power supply systemIT
TypeInstallation module
Number of Positions1
Surge protection fault messageOptical, remote indicator contact

Insulation characteristics

Overvoltage category8 kV: IV (600 V), III (1000 V)
Pollution degree3

Electrical properties

Nominal frequency fN50 Hz (60 Hz)
Nominal voltage UN690 V AC

Indicator/remote signaling

Connection nameRemote fault indicator contact
Switching function2x N/C contacts, 1-pos.
Operating Voltage30 V AC
Operating Voltage30 V DC
Operating current1.5 A AC
Operating current1.5 A DC

Supply: Status indicator/remote signaling

Operating Voltage19.2 V AC/DC ... 30 V AC/DC
Operating current7 mA AC/DC ... 13 mA AC/DC
Rated current10 mA AC/DC
Max. required back-up fuse1 A (e.g. T to IEC 127-2/III)
Immunity to interference according to IEC 61000-4-5 (line-line)1 kV
Immunity to interference according to IEC 61000-4-5 (line-earth)6 kV

Double terminal point

Connection MethodScrew connection
Screw threadM6
Tightening torque8.5 Nm
Stripping length24 mm
Conductor cross section flexible16 mm² ... 50 mm²
Conductor cross section rigid16 mm² ... 50 mm²
Conductor cross section AWG6 ... 1/0

PE conductor connection

Connection MethodRing cable lug
Tightening torque20 Nm
Conductor cross section flexible16 mm² ... 95 mm²
Conductor cross section rigid16 mm² ... 95 mm²
Conductor cross section AWG6 ... 3/0

Remote fault indicator contact

Screw threadM3
Tightening torque0.55 Nm
Stripping length7 mm
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 12

Dimensions

Width56 mm
Height191 mm
Depth280 mm
Horizontal pitch3 Div.

Material specifications

ColorSilver
Flammability rating according to UL 94V-2
CTI value of material600
CTI value of material250
Insulating materialPA/PC
Material groupI (PA 6.6/PC)
Material groupIIIa (PA 4.6)
Housing MaterialDie-cast aluminum, salt water resistant
Housing surface materialdie-cast aluminum

Mechanical data

Open side panelNo

Protective circuit

Mode of protectionL-PE
Direction of action1L-PEN
Nominal voltage UN690 V AC
Nominal voltage UN554/960 V AC (TN-C)
Nominal voltage UN690 V AC (IT)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous operating voltage UC (L-PE)800 V AC
Rated load current IL150 A (Serial through wiring with 50 mm²)
Residual current IPE≤ 20 µA
Standby power consumption PC≤ 16.00 mVA
Nominal discharge current In (8/20) µs (L-PE)35 kA
Maximum discharge current Imax (8/20) µs (L-PE)100 kA
Impulse discharge current (10/350) µs (L-PE), charge17.5 As
Impulse discharge current (10/350) µs (L-PE), specific energy305 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value Iimp35 kA
Follow current interrupt rating Ifi (L-PE)50 kA
Short-circuit current rating ISCCR50 kA
Voltage protection level Up (L-PE)≤ 4.5 kV
Residual voltage Ures (L-PE)≤ 2.7 kV (at In)
Residual voltage Ures (L-PE)≤ 2.5 kV (at 20 kA)
Residual voltage Ures (L-PE)≤ 2.3 kV (at 10 kA)
Residual voltage Ures (L-PE)≤ 2.2 kV (at 5 kA)
Residual voltage Ures (L-PE)≤ 2.1 kV (at 3 kA)
TOV behavior at UT (L-PE)1960 V AC (200 ms / withstand mode)
TOV behavior at UT (L-PE)1500 V AC (5 s / withstand mode)
Response time tA (L-PE)≤ 100 ns
Max. backup fuse with V-type through wiring125 A (gG at ≥35 mm²)
Max. backup fuse with branch wiring400 A (gG at 2x 50 mm²)
Max. backup fuse with branch wiring800 A (aR (only up to Iimp = 25 kA))

Ambient conditions

Degree of ProtectionIP20 (only when all terminal points are used)
Ambient Temperature (Operation)-40 °C ... 80 °C
Ambient Temperature (Operation)-40 °C ... 55 °C (serial through wiring ≥ 35 mm²)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 4000 m (amsl)
Permissible humidity (operation)5 % ... 95 %
Shock (operation)25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (Operation)5g (10 ... 150 Hz / 2.5 h / X, Y, Z)
Vibration (Operation)4g (5 ... 100 Hz / X, Y, Z - according to GL )

UL specifications

Maximum continuous operating voltage MCOV (L-G)800 V AC
Nominal discharge current In (L-G)20 kA
Mode of protectionL-G
Nominal Voltage690 V AC
Power distribution systemSingle phase
Nominal frequency60 Hz
Measured limiting voltage MLV (L-G)4370 V
SPD Type4CA

UL indicator/remote signaling

Operating Voltage30 V AC
DC operating voltage30 V DC
AC operating current1.5 A AC
DC operating current1.5 A DC

UL connection data Double terminal point

Tightening torque75 lbf-in.
Conductor cross section AWG1/0 ... 6

UL connection data PE conductor connection

Tightening torque175 lbf-in.
Conductor cross section AWG3/0

Standards and Regulations

Standards/specificationsIEC 61643-11
Note2011
Standards/specificationsEN 61643-11
Note2012

Mounting

Mounting TypeScrew mounting

Why Proax for Phoenix Contact 2800419?

Proax is an authorized distributor of Phoenix Contact 2800419 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Best Sellersin Surge Protection
  • 2907918
    2907918
    PLT-SEC-T3-120-FM-UT - Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
  • 2798844
    2798844
    Type 2 surge protection plug - VAL-MS 230 ST
  • 2817741
    2817741
    VAL-MS BE - Base element for type 2 arresters of the VALVETRAB MS series of products. Design: 1-channel
  • 2907922
    2907922
    Type 3 surge protection plug - PLT-SEC-T3-120-P-UT/PT
  • 2838843
    2838843
    Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 320 V AC
  • 2907924
    2907924
    PLT-SEC-T3-BE-FM-UT - Base element for protective plugs from the PLT-SEC-...-UT/PT product series with remote indication contact.
  • 3030747
    3030747
    ATP-STTB 4 - Partition plate, depth: 53 mm, width: 2 mm, height: 88.7 mm, color: gray
  • 2906798
    2906798
    Surge protection device - TTC-6-1X2-24DC-UT
  • 2907923
    2907923
    Type 3 surge protection plug - PLT-SEC-T3-230-P-UT/PT
  • 2920447
    2920447
    Type 2 surge arrester - VAL-MS 580/3+0-FM

CAD$809.47

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability