Official Distributor
SKU
MPN
2761826
Weight
0.076 kg
This product is Not Cancellable/Not Returnable
Series SUBCON-PLUS-M
SUBCON-PLUS M1 - D-SUB bus connector
D-SUB connector, 9-pos., male connector, two 35° cable entries, bus system: Modbus, Modbus Plus, BITBUS, ARCNET, MULT/MININET (B&R), SYSTEM 2003 (B&R), P-NET, pin assignment: 1, 2, 3, 5, 6, 8 to two screw connection terminal blocks
- Separate terminal blocks for each cable
- Assembly under field conditions
- High transmission speed
- Easy assembly thanks to knurled screws
- High level of EMC
- Flexibility in terms of cable entry selection
- Can be used universally
- Change to the D-SUB orientation through a reversible connection block
Technical Specifications
Utilization restriction
CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
MTTF | 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
MTTF | 1817 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
MTTF | 155 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Pin assignment | 1, 2, 3, 5, 6, 8 on two terminal blocks |
Electrical properties
Nominal voltage UN | 50 V DC |
Nominal current IN | 100 mA |
Transmission medium | Copper |
D-SUB connection
Connection Method | D-SUB connector |
PCB connection
Connection Method | Screw connection |
Stripping length | 5 mm |
Conductor cross section, rigid min. | 0.14 mm² |
Conductor cross section, rigid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.14 mm² |
Conductor cross section flexible max. | 1 mm² |
Single-wire/terminal point, rigid AWG min. | 26 |
Single-wire/terminal point, rigid AWG max. | 16 |
Min. AWG conductor cross section, flexible | 26 |
Max. AWG conductor cross section, flexible | 18 |
Interfaces
Bus system | Modbus, BODBUS-PLUS, BITBUS, ARCNET, MULT/MININET(B&R), SYSTEM 2003(B&R), P-NET |
Signal | RS-485 |
Dimensions
Width | 16 mm |
Height | 44 mm |
Length | 60 mm |
Material specifications
Material (Housing) | ABS (metal-plated) |
Cable/line
External Cable Diameter | 6 mm ... 10 mm (Incoming bus line) |
Mechanical data
Insertion/withdrawal cycles | > 200 |
Ambient conditions
Degree of Protection | IP40 |
Ambient Temperature (Operation) | -20 °C ... 75 °C |
Ambient temperature (storage/transport) | -25 °C ... 80 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
ATEX
Identification | II 3 G Ex nA IIC T4 Gc X |
Note | Please follow the special installation instructions in the documentation! |
Corrosive gas test
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Standards and Regulations
Free from substances that could impair the application of coating | in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
Accessories
Why Proax for Phoenix Contact SUBCON-PLUS M1?
Proax is an authorized distributor of Phoenix Contact SUBCON-PLUS M1 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | SUBCONPLUSM1 |
Pack Size | 1 |
Recommended