2322731
Official DistributorSKU
PHX2322731
MPN
VIP-PA-FLK14/ 6,0M/S7
Weight
0.94 kg
This product is Not Cancellable/Not Returnable
Series VIP-PA-FLK
VIP-PA-FLK14/ 6,0M/S7 - Front adapter
VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- Power supply via terminal blocks with spring-cage double connection
- Can be screwed on with the I/O module
- Encapsulated socket strips on the module side
Technical Specifications
Insulation characteristics
| Insulation | Functional insulation |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Operating voltage (AC) | ≤ 25 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Nominal operating mode | 100% operating factor |
| Current (Per path) | ≤ 1 A |
| Current (per connection) | ≤ 8 A (Feed-in via separate power supply) |
| Current (Total current per byte) | ≤ 2 A (during supply via a separate bridged power supply) |
Air clearances and creepage distances
| Rated Insulation Voltage | 63 V |
| Rated surge voltage | 0.6 kV |
Supported controller SIEMENS S7-300 / ET 200 M
| Suitable I/O card | 6ES7321-1BH50-0AA0 |
| Suitable I/O card | 6ES7321-7BH01-0AB0 |
| Suitable I/O card | 6ES7321-1BH02-0AA0 |
| Suitable I/O card | 6ES7321-1BH10-0AA0 |
| Suitable I/O card | 6ES7322-1BH01-0AA0 |
| Suitable I/O card | 6ES7322-8BF00-0AB0 |
| Suitable I/O card | 6ES7322-1BH10-0AA0 |
| Suitable I/O card | 6ES7323-1BH01-0AA0 |
| Suitable I/O card | 6ES7331-7HF01-0AB0 |
| Suitable I/O card | 6ES7331-7KF02-0AB0 |
| Suitable I/O card | 6ES7331-7KB02-0AB0 |
| Suitable I/O card | 6ES7331-7TF01-0AB0 |
| Suitable I/O card | 6ES7332-5HD01-0AB0 |
| Suitable I/O card | 6ES7332-5HB01-0AB0 |
| Suitable I/O card | 6ES7332-7ND02-0AB0 |
| Suitable I/O card | 6ES7332-8TF01-0AB0 |
| Suitable I/O card | 6ES7334-0CE01-0AA0 |
| Suitable I/O card | 6ES7334-0KE00-0AB0 |
| Suitable I/O card | 6ES7335-7HG01-0AB0 |
| Suitable I/O card | 6ES7338-4BC01-0AB0 |
| Suitable I/O card | 6ES7350-1AH03-0AE0 |
| Suitable I/O card | 6ES7351-1AH01-0AE0 |
| Suitable I/O card | 6ES7352-1AH02-0AE0 |
| Suitable I/O card | 6ES7353-1AH01-0AE0 |
| Suitable I/O card | 6ES7354-1AH01-0AE0 |
| Suitable I/O card | 6ES7355-0VH10-0AE0 |
| Suitable I/O card | 6ES7355-1VH10-0AE0 |
Control side
| Connection Method | Plug-in connection |
| Note | Can be plugged onto 20-pos. I/O modules |
Field level
| Connection in acc. with standard | IEC 60603-13 |
| Connection Method | IDC/FLK socket strip |
| Number of Connections | 2 |
| Number of Positions | 14 |
| Pitch | 2.54 mm |
Supply
| Connection Method | Push-in connection |
| Stripping length | 10 mm |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
Cable
| Length | 6 m |
14X0.14 [PVC]
| UL AWM style | 2464/1061 |
| Number of Positions | 14 |
| Shielded | no |
| Cable Type | 14X0.14 [PVC] |
| Conductor type | Round cable set |
| Conductor structure signal line | 7x 0.16 mm |
| AWG Signal Line | 26 |
| Conductor Cross Section | 14x 0.14 mm² |
| Wire diameter incl. insulation | 1 mm ±0.03 mm |
| External Cable Diameter | 6.40 mm ±0.4 mm |
| Outer sheath, material | Semi-rigid PVC |
| External sheath, color | gray |
| Conductor material | Tin-plated Cu litz wires |
| Cable resistance | ≤ 145 Ω/km (20 °C) |
| Insulation resistance | ≥ 20 MΩ*km (20 °C) |
| Smallest bending radius, fixed installation | 55 mm |
| Smallest bending radius, movable installation | 104 mm |
| Max. bending cycles | 5000 (at a radius of ≥ 15x outside diameter) |
| Halogen-free | no |
| Flame resistance | IEC 60332-1-2 (raw cable) |
| Flame resistance | VDE 0842, Part 332-1-2 (raw cable) |
| Flame resistance | IEC 60332-3-22 (raw cable) |
| Flame resistance | UL VW-1 |
| Flame resistance | CSA FT-1 |
| Resistance to Oil | can withstand occasional splashes (raw cable) |
Ambient conditions
| Degree of Protection | IP20 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances
| Standards/regulations | DIN EN 50178 |
Mounting
| Mounting Position | any |
Notes
| Notes on operation | Analog I/O cardsTo avoid short-circuits, all wire bridges must be disconnected!No voltage supply may be supplied to the front adapter! |
| Notes on operation | Digital I/O cardsThanks to the existing wire bridge upon delivery, the input and output bytes are non-isolated. |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Accessories
VIP-2/SC/2FLK14 (1-20) /S7 - VARIOFACE interface module for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific labeling (1 - 20), with screw connection, module width: 80.6 mm
VIP-2/PT/2FLK14 (1-20) /S7 - VARIOFACE interface module for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific labeling (1 - 20), with push-in connection, module width: 82.5 mm
FLKM-2FLK14/KDS3-MT/PPA/S7 - VARIOFACE termination board for Siemens SIMATIC® S7-300, for max. 16 channels with SIMATIC®-specific marking (1-20), knife-disconnect terminal block, and test pick-off, module width: 113 mm
PLC-V8/FLK14/OUT - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
PLC-V8/FLK14/IN - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of input cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
PLC-V8L/FLK14/OUT - V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
VIP-3/PT/FLK14/8IM/PLC - VARIOFACE sensor module, with push-in connection, for connecting 8 pnp sensors
Why Proax for Phoenix Contact 2322731?
Proax is an authorized distributor of Phoenix Contact 2322731 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
VIP-PA-FLK14/ 8,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected- VIP-PA-FLK14/ 4,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/ 3,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/ 2,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/ 2,5M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/ 1,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/ 0,5M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
- VIP-PA-FLK14/10,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 2 x 8 channels can be connected
VIP-PA-FLK14/BRIDGE-SET/S7 - PCB plug-in bridge for adapter VIP-PA-FLK14...M/S7 for establishing a connection between feed-in terminals and Siemens card if the cards are analog. The plus terminal is connected with terminal point 1 of the card, the minus terminal with terminal point 20.
VIP-PA-FLK14/FS/ 2,0M/S7 - VIP VARIOFACE front adapter, with connected system cables with 180° punched-on connector for SIMATIC S7-300, 2 x 8 channels can be connected, cable length: 2 m
VIP-PA-FLK50/ 5,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected- VIP-PA-FLK50/ 4,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 3,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 2,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 2,5M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 1,0M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 1,5M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected
- VIP-PA-FLK50/ 0,5M/S7 - VIP VARIOFACE front adapter, with connected system cables for SMATIC S7-300, 1 x 32 channels can be connected