Official DistributorSKU
MPN
FLKM 14-PA/GE/DI
Weight
0.055 kg
This product is Not Cancellable/Not Returnable
Series FLKM
FLKM 14-PA/GE/DI - Front adapter
VARIOFACE front adapter, for GE-FANUC series 90-30, 2 x 8 channels can be connected, digital input
- Preassembled system cables are connected directly to I/O modules using the front adapters
Technical Specifications
Product properties
| Product family | VARIOFACE |
Insulation characteristics
| Insulation | Functional insulation |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Nominal operating mode | 100% operating factor |
| Current (per branch) | ≤ 1 A |
| Current (Voltage supply via IDC/FLK) | ≤ 3 A |
Air clearances and creepage distances
| Rated Insulation Voltage | 63 V |
| Rated surge voltage | 0.6 kV (1.2/50 μs) |
Supported controller GE-FANUC 90-30
| Suitable I/O card | IC693 MDL241 |
| Suitable I/O card | IC693 MDL634 |
| Suitable I/O card | IC693 MDL645 |
| Suitable I/O card | IC693 MDL646 |
Connection 1 (control level)
| Connection Method | Plug-in connection |
| Number of Positions | 19 |
Connection 2 (field level)
| Connection in acc. with standard | IEC 60603-13 |
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 2 |
| Number of Positions | 14 |
| Insertion/withdrawal cycles | > 50 |
| Pitch | 2.54 mm |
Connection 3 (supply)
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Screw thread | M2 |
| Number of Connections | 1 |
| Number of Positions | 2 |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Tightening torque | 0.22 Nm ... 0.25 Nm |
| Pitch | 3.81 mm |
Ambient conditions
| Degree of protection (Module) | IP20 |
| Degree of protection (Installation location) | ≥ IP54 |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances
| Standards/regulations | EN IEC 60664-1 |
Mounting
| Mounting Type | Plug-in mounting |
| Mounting Position | any |
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Why Proax for Phoenix Contact 2290038?
Proax is an authorized distributor of Phoenix Contact 2290038 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2290009 - VARIOFACE front adapter, for GE-FANUC series 90-30, 2 x 8 channels can be connected, digital output
2289913 - VARIOFACE front adapter, for B&R MULTICONTROL / MIDICONTROL / M 264, for digital input E243, 3 x 8 channels can be connected, non-isolated
2289900 - VARIOFACE front adapter, for B&R MULTICONTROL / MIDICONTROL / M 264, for digital output A244, 3 x 8 channels can be connected, non-isolated
2288480 - VARIOFACE front adapter, for B&R MULTICONTROL / MIDICONTROL / M 264, for digital assemblies, 2 x 8 channels can be connected
2304128 - VARIOFACE front adapter for Inline modules, for transferring 8 digital input signals.
2302751 - VARIOFACE front adapter for Inline modules, for transferring 16 (2 x 8) digital input signals.
2302777 - VARIOFACE front adapter for Inline modules, for transferring 32 (4 x 8) digital signals.
2304131 - VARIOFACE front adapter for Inline modules, for transferring 8 digital output signals.
2302764 - VARIOFACE front adapter for Inline modules, for transferring 16 (2 x 8) digital output signals.
2296618 - VARIOFACE front adapters, for ControlLogix, max. 2x 8 channels can be connected, number of positions 14.The front adapters cannotbe pushed into a hood!
2302861 - VARIOFACE front adapters, for Allen Bradley ControlLogix and Honeywell PlantScape, max. 2 x 8 channels can be connected.The front adapters are pushed into the high 1756-TBE hoods (not supplied as standard).
2901037 - VARIOFACE Front Adapters, for Allen Bradley ControlLogix and Honeywell PlantScape.The front adapters are pushed into the high 1756-TBE hoods (not supplied as standard).
2302874 - VARIOFACE front adapter, for Allen Bradley ControlLogix and Honeywell PlantScape, input card IA 16, IB 16, IC 16, IN 16.The front adapters are pushed into the high 1756-TBE hoods (not supplied as standard).- 2296621 - VARIOFACE front adapters, for ControlLogix, input card IA 16, IB 16, IC 16, IN 16, number of positions 14.The front adapters cannotbe pushed into a hood!
2289971 - VARIOFACE front adapter, for Mitsubishi Electric MELSEC A1S X80 and X80-1, 2 x 8 channels can be connected- 2289939 - VARIOFACE front adapter, for Mitsubishi Electric MELSEC A1S Y80, 2 x 8 channels can be connected
2289450 - VARIOFACE front adapter, for Schneider Electric Modicon TSX-Compact (A120, 984), 2 x 8 channels can be connected
