Official DistributorSKU
MPN
1584321
Weight
0.54 kg
This product is Not Cancellable/Not Returnable
Series HC-D
HC-D 64-A-UT-PER-F - Terminal adapter
HEAVYCON terminal adapter female insert, D64 series, 64-pos., left protective conductor connection for the right side of the control cabinet, screw connection
Technical Specifications
Notes
| General | For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B24 type |
| General | Connectors may be operated only when there is no load/voltage. |
Product properties
| Product family | HC-D |
| Series | HC-D |
| Type | B24 |
| Number of Positions | 64 |
| Connection profile | 64+PE |
| Type | for the right side of the control cabinet |
| Screwdriver blade | 0.5 x 3.5 mm |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical properties
| Rated voltage (III/3) | 250 V |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| SCCR | 5 kA (UL 2237) |
Connection technology
| Connection technology | Screw connection |
| Connection in acc. with standard | IEC / EN |
Conductor connection
| Conductor Cross Section | 0.2 mm² ... 2.5 mm² |
| Connection cross section AWG | 22 ... 12 |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| Stripping length of the individual wire | 10 mm |
Dimensions
| Width | 34 mm |
| Height | 132.6 mm |
| Length | 110 mm |
| Drill hole distance, horizontal | 104 mm |
| Drill hole distance, vertical | 27 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact Material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Cable/line
| Stripping length of the individual wire | 10 mm |
Mechanical data
| Insertion/withdrawal cycles | ≥ 500 |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 125 °C |
Standards and Regulations
| Constructional and testing regulations | DIN EN 61984 |
| Constructional and testing regulations | DIN EN 60664 |
| Constructional and testing regulations | IEC 60352 |
| Tests | DIN EN 61984 |
| Tests | DIN EN 60664 |
| Tests | IEC 60352 |
Testing
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Mounting
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Assembly instructions | Not for HC-EVO panel mounting bases |
| Assembly instructions | Not for HC-EVO panel mounting bases |
| Assembly instructions | Not for HC-B 24-AMQ-EMV housings |
Accessories
1775240 - Foot element, for mounting on DIN rail NS 32, DIN rail NS 35/7.5 or DIN rail NS 35/15, can be inserted between basic and side element
1660083 - Locking screw barrel, for a firm connection of contact inserts and DIN-rail mountable terminal adapters
1772722 - Coding pin, prevents mismating of up to six connectors with an identical number of positions
1644326 - PE multiplier, for 3 PE connections, for HC-B / HC-BB / HC-DD / HC-D40 / HC-D64 contact inserts
Why Proax for Phoenix Contact HC-D 64-A-UT-PER-F?
Proax is an authorized distributor of Phoenix Contact HC-D 64-A-UT-PER-F and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | HCD64AUTPERF |
| Pack Size | 1 |
Recommended
1584318 - HEAVYCON terminal adapter male insert, D64 series, 64-pos., left protective conductor connection for the right side of the control cabinet, screw connection
1584295 - HEAVYCON terminal adapter female insert, D64 series, 64-pos., right protective conductor connection for the left side of the control cabinet, screw connection
1584282 - HEAVYCON terminal adapter male insert, D64 series, 64-pos., right protective conductor connection for the left side of the control cabinet, screw connection
1580189 - HEAVYCON terminal adapter female insert, D64 series, 64-pos., right PE connection for the left side of the control cabinet, push-in connection
1580192 - HEAVYCON terminal adapter male insert, D64 series, 64-pos., right PE connection for the left side of the control cabinet, push-in connection
1580202 - HEAVYCON terminal adapter female insert, D64 series, 64-pos., left PE connection for the right side of the control cabinet, push-in connection
1580215 - HEAVYCON terminal adapter male insert, D64 series, 64-pos., left PE connection for the right side of the control cabinet, push-in connection
1584431 - Contact insert, number of positions: 64+PE, size: B24, number of connections per position: 1, Pin, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2, application: Signal
1584444 - Contact insert, number of positions: 64+PE, size: B24, number of connections per position: 1, Socket, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2, application: Signal
1775402 - Flat-ribbon cable adapter, female insert with FLK 50, dimensions A 130, B 140, no. of positions 64
1772528 - Contact insert, number of positions: 64+PE, size: D64, Pin, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2
1775871 - HEAVYCON panel mounting base B50, for double locking latch, height 28 mm, with cover
1775868 - Panel mounting base D50, with double locking latch, material: die-cast aluminum, height: 28 mm, cable gland: none, Standard
1604971 - HEAVYCON coupling housing D50, with double locking latch, height 76 mm, with support 1xM32- 1604970 - HEAVYCON coupling housing D50, with double locking latch, height 76 mm, with support 1xM25
1672945 - Coupling housing, with double locking latch, height 76 mm, with screw connection, 1x Pg21
1775923 - Box mounting base, for double locking latch, height 97 mm, with screw connection, 2x Pg21, with protective covers- 1775910 - Box mounting base, for double locking latch, height 97 mm, with screw connection, 1x Pg21, with protective covers
1604907 - HEAVYCON box mounting base D50 for double locking latch, height 97 mm, with support 1xM25, with cover
