1417443
Official DistributorSKU
PHX1417443
MPN
VS-08-M12MR-10G-P SCO
Weight
0.035 kg
This product is Not Cancellable/Not Returnable
Series VS
VS-08-M12MR-10G-P SCO - Data connector
Data connector, Ethernet CAT6A (10 Gbps), 8-position, shielded, Plug angled M12 SPEEDCON, coding: X, Piercecon® fast connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm
- Safe use in the field, thanks to a high degree of protection
- Save time, thanks to installation with SPEEDCON fast locking system
- Reliable signal transmission – 360° shielding in environments with electromagnetic interference
Technical Specifications
Notes
| Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
| Assembly instructions | The connector pin assignment can be rotated 90° to the cable outlet |
Product properties
| Application | Data |
| Sensor Type | Ethernet |
| Number of Positions | 8 |
| No. of cable outlets | 1 |
| Shielded | yes |
| Coding | X |
| Cable outlet | angled |
Insulation characteristics
| Overvoltage category | II |
| Degree of pollution | 3 |
Dimensions
| Length | 42 mm |
| Wrench size, union nut | 13 mm |
External dimensions
| Outside diameter | 4 mm ... 8 mm |
Housing
| Diameter housing | 15 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Material of grip body | Zinc die-cast, nickel-plated |
| Contact Material | CuSn |
| Contact surface material | Ni/Au |
| Contact carrier material | PP |
| Material for screw connection | Zinc die-cast, nickel-plated |
Conductor connection
| Connection Method | Piercecon® fast connection |
| Connection cross section | 0.14 mm² ... 0.14 mm² (flexible) |
| Connection cross section AWG | 26 (flexible) |
| Tightening torque | 0.4 Nm (M12 knurl) |
| Tightening torque | 2 Nm (Screw plug insert with sleeve housing as far it will go) |
| Tightening torque | 1 Nm (Pressure nut with coupling sleeve) |
Electrical properties
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 10 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 48 V AC |
| Nominal voltage UN | 60 V DC |
| Nominal current IN | 0.5 A (30 W) |
Mechanical data
| Insertion/withdrawal cycles | ≥ 100 |
Connection 1
| Head design | Plug |
| Head cable outlet | angled |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | X |
Cable/line
| Signal type/category | Ethernet CAT6A (IEC 11801), 10 Gbps |
Ambient conditions
| Degree of Protection | IP65 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C (Plug / socket) |
Standards and Regulations
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-109 |
Accessories
MICROFOX-SP-1 - Electronic diagonal cutter, tapered head, without chamfer, with opening spring, non-reflective phosphate-treated surface, punched version
Why Proax for Phoenix Contact 1417443?
Proax is an authorized distributor of Phoenix Contact 1417443 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
VS-08-M12MS-10G-P SCO - Data connector, Ethernet CAT6A (10 Gbps), 8-position, shielded, Plug straight M12 SPEEDCON, coding: X, Piercecon® fast connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm- VS-08-M12MS-10G-P SCO WL - M12 connector, CAT6A, connector, straight, 8-pos., shielded, for cable diameters of 4 mm ... 8 mm, customer version
VS-08-LI-RJ45-RJ45-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45 on RJ45, length: 5 m
VS-08-LI-VSIP20-RJ45-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45/IP20 on RJ45, length: 5 m
VS-08-LI-VSIP20-VSIP20-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45/IP20 on RJ45/IP20, length: 5 m
VS-08-LI-VSIP20G-RJ45-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, color: RAL 5021 (water blue), RJ45/IP20 turned on RJ45, length: 5 m
VS-08-LI-VSIP20G-VSIP20G-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, color: RAL 5021 (water blue), RJ45/IP20 turned on RJ45/IP20 turned, length: 5 m
VS-08-LI-VSIP67-RJ45-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45/IP67 on RJ45, length: 5 m
VS-08-LI-VSIP67-VSIP20-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45/IP67 on RJ45/IP20, length: 5 m
VS-08-LI-VSIP67-VSIP20G-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, color: RAL 5021 (water blue), RJ45/IP67 turned on RJ45/IP20, length: 5 m
VS-08-LI-VSIP67-VSIP67-CF-5,0 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, AWG 26 stranded (7-wire), line, RAL 5021 (water blue), RJ45/IP67 on RJ45/IP67, length: 5 m
RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: Plastic, connection method: Crimp connection, connection cross section: AWG 26- 23, cable outlet: straight, Ethernet
VS-08-NP-RJ45-BU - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: Plastic, connection method: Crimp connection, connection cross section: AWG 26- 24, cable outlet: straight, Ethernet
VS-08-KS/GR - RJ45 bend protection sleeve, for pin insert VS-08-ST-RJ45, cable cross section up to 6 mm, color: gray
VS-08-KS/GN - RJ45 bend protection sleeve, for pin insert VS-08-ST-RJ45, cable cross section up to 6 mm, color: green
VS-08-KS-H/GN - RJ45 bend protection sleeve, for pin inserts VS-08-ST-H11-RJ45 and VS-08-ST-H21-RJ45, for cable cross section up to 7 mm, color: green
