AC Motor Controller
Official DistributorSKU
AC Motor Speed Controller (Single-Phase 110/115 VAC)
DSC Series speed controller for AC speed control motors.Documents
Technical Specifications
| Power Supply | Single-Phase 110/115 VAC |
| Frequency (Hz) | 60 |
| Current | 0.75 A |
| Control Power Source | 24 VDC ±10% 0.15 A or more |
| Electromagnetic Brake | Not Supported |
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | c-UL |
| CE Marking | Low Voltage Directives |
| Degree of Protection | IP20 |
| Speed Control Method (Select one of the following) | Setting via control panel (A maximum of 4 patterns of operating data can be set) |
| Acceleration/Deceleration Time Setting Range | 0.0 ~ 15.0 secondsAcceleration/deceleration time varies with the load condition of the motor. |
| Monitoring Mode | Speed, operating data number, alarm code, warning code, I/O monitor |
| Data Mode | Speed, acceleration time, deceleration time, reset |
| Parameter Mode | Gear ratio, speed increasing ratio, fixed last digit display, initial operation inhibition alarm, external speed command input, external speed command voltage selection, external speed command offset, speed upper and lower limit, input function selection, output function selection, motor lock detection time, motor rotation direction, reset |
| Test Mode | JOG Operation |
| Other Function | Lock data editing |
| Input Signals | Photocoupler Input Input resistance 4.7 kΩArbitrary signal assignment to IN0 ~ IN5 input (6 points) is possible [ ]: Initial setting[FWD], [REV], [M0], [M1], [ALARM-RESET], [FREE], EXT-ERRORSink Input/Source Input…Can be switched using the selection switch: Factory setting sink input |
| Output Signals | Photocoupler and Open-Collector Output External power supply: 4.5~30 VDC 40 mA max.Arbitrary signal assignment to OUT0, OUT1 output (2 points) is possible [ ]: initial settingSink Output/Source Output…Supports external wiring |
| Protective Function | When the following protective functions are activated, the motor will coast to a stop, and the ALARM output will be turned off. At the same, the alarm code will be displayed on the control panel and the ALARM LED will illuminate.Alarm Types: Motor overheat, motor lock, overspeed, EEPROM error, initial operation inhibition, external stop |
Why Proax for Oriental Motor DSCD25UA?
Proax is the authorized distributor of Oriental Motor DSCD25UA. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
