Official DistributorBy ABB
SKU
MPN
1SFA897113R7001
Weight
12.417 kg
The softstarter PSE250-600-70-1 has a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.
Technical Specifications
Dimensions
| Product Net Width | 190 mm |
| Product Net Height | 435 mm |
| Product Net Depth / Length | 237 mm |
| Product Net Weight | 10.6 kg |
Technical
| Rated Operational Voltage | 208 ... 600 V AC |
| Rated Control Supply Voltage (Us) | 100 ... 250 V AC |
| Rated Control Circuit Voltage (Uc) | 24 V DC |
| Rated Frequency (f) | 50/60 Hz |
| Rated Frequency (f) | Main Circuit 50 / 60 Hz |
| Rated Operational Power - In-Line Connection (Pe) | (230 V) 75 kW |
| Rated Operational Power - In-Line Connection (Pe) | (400 V) 132 kW |
| Rated Operational Power - In-Line Connection (Pe) | (500 V) 160 kW |
| Rated Operational Current - In-Line Connection (Ie) | 250 A |
| Service Factor Percentage | 100 % |
| Overload Protection | Built-in electronic overload protection |
| Integrated Electronic Overload | Yes |
| Adjustable Rated Motor Current Ie | 30 ... 100 % |
| Starting Capacity at Maximum Rated Current Ie | 4xIe for 10s |
| Ramp Time | 0 ... 30 second [unit of time] |
| Ramp Time | 1 ... 30 second [unit of time] |
| Initial Voltage During Start | 30 ... 70 % |
| Step Down Voltage Special Ramp | No % |
| Current Limit Function | 1.5 ... 7xIe |
| Switch for Inside Delta Connection | No |
| Run Signal Relay | Yes |
| By-pass Signal Relay | Yes |
| Fault Signal Relay | Yes |
| Overload Signal Relay | Yes |
| Analog Outputs | 4…20 mA |
| Signal indication completed start ramp (LED) | Green |
| Signal indication ready to start/standby ON (LED) | Green |
| Signal indication running R (LED) | Green |
| Signal indication ramping up/down (LED) | Green |
| Signal indication protection (LED) | Yellow |
| Signal indication fault (LED) | Red |
| Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time | 10 |
| Communication | Modbus-RTU |
| Degree of Protection | IP00 |
| Terminal Type | Main Circuit: Bars |
| Connecting Capacity Main Circuit | Hole Diameter 8.5 mm |
| Connecting Capacity Main Circuit | Rigid 1/2 x 2.5 ... 70 mm² |
| Connecting Capacity Main Circuit | Width and Thickness 17.5x5 mm |
| Connecting Capacity Control Circuit | Rigid 1 x 2.5 mm² |
| Connecting Capacity Control Circuit | Rigid 2 x 1.5 mm² |
| Connecting Capacity Supply Circuit | Rigid 1 x 2.5 mm² |
| Tightening torque | Control Circuit 0.5 N·m |
| Tightening torque | Main Circuit 28 N·m |
| Tightening torque | Supply Circuit 0.5 N·m |
| Product Main Type | PSE250 |
| Function | Soft start with torque control |
| Function | Soft start with voltage ramp |
| Function | Soft stop with torque control |
| Function | Soft stop with voltage ramp |
| Function | Kick start |
| Function | Sequence start |
| Function | Current limit |
| Function | Start reverse (external contactors) |
| Function | Automatic restart |
| Function | Event log |
| Protection Function | Electronic overload protection, EOL; Locked rotor protection; Current underload protection |
Technical UL/CSA
| Maximum Operating Voltage UL/CSA | Main Circuit 600 V |
| Tightening Torque UL/CSA | Control Circuit 4.4 in·lb |
| Tightening Torque UL/CSA | Main Circuit 247.8 |
| Tightening Torque UL/CSA | Supply Circuit 4.4 in·lb |
Why Proax for ABB PSE250-600-70-1?
Proax is an authorized distributor of ABB PSE250-600-70-1 and one of ABB's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PSE250600701 |
| Pack Size | 1 |
Recommended
