Technical Specifications
| Dimensions | W 197 mm x D 82.6 mm x H 120 mm |
| Applicable Light Unit (output ratings) | 24V LIGHT connectors: Lights with 24-VDC input, HLV LIGHT connectors: HLV2/HLV-series Spot Lights, Total for 4 channels: 46W |
| Number of channels | 4 channels |
| Lighting Method | Constant/Strobe lighting |
| Drive Method | 24V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system |
| Intensity control method | 24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control |
| PWM frequency | 125kHz |
| Frequency | 50/60 Hz |
| Output Voltage | 24VDC |
| Output Current | Total for 4 channels: 1.91 A |
| Inrush Current | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start |
| Intensity control | Use of the setting switch on the front panel (256 steps) |
| Error detection display | Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV2/HLV-series Spot Lights only) |
| Error detection output | Command sent when overcurrent output is detected. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. |
| Output connector | SMP-03V-BC x 8 pieces |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: RJ-45 |
| Conformed standards | CE, RoHS |
| Operating temperature and humidity | Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) |
| Cooling Method | Forced cooling |
| Weight | 1200 g |
| Material | Aluminium, ABS |
| Accessories | 2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1, Brackets for the PD3-series Control Unit (BK-PD3) x 1 (including 2 brackets) |
Why Proax for CCS PD3-5024-4-EI?
Proax is the authorized distributor of CCS PD3-5024-4-EI. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PD350244EI |
| Pack Size | 1 |
Recommended
_p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W. Connection with the HLV3/HLV2-series Spot Lights is also available. This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W. Connection with the HLV3/HLV2-series Spot Lights is also available. It operates with 24 VDC input. It measures 197 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W. Connection with the HLV3/HLV2-series Spot Lights is also available. This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W. Connection with the HLV3/HLV2-series Spot Lights is also available. It operates with 24 VDC input. It measures 197 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W. Connection with the HLV3/HLV2-series Spot Lights is also available. This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 48 W. It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 48 W. It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications.