Official Distributor
SKU
MPN
TC ROUTER 3002T-4G ATT
Series TC-ROUTER
TC ROUTER 3002T-4G ATT - Router
Industrial LTE 4G router, version for AT&T (US), fallback to 3G UMTS/HSPA, 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output
- Industrial 4G cellular router (LTE)
- Fallback to 3G (UMTS/HSPA)
- Cellular high-speed Internet connection up to 150 Mbps
- Networking of Ethernet end devices via the cellular network
- Ethernet SMS gateway for easy alerting
- Stateful inspection firewall for dynamic filtering
- NAT table and port forwarding for direct remote access to an end device
- Two switching inputs and one switching output
- Configuration via web-based management or microSD card
- Two local Ethernet connections
- Switchable energy-saving mode
- Integrated logbook
- Connection monitoring
- Extended temperature range of -40 °C … +70 °C
Technical Specifications
Utilization restriction
CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
Application | Ethernet |
MTTF | 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
MTTF | 184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
MTTF | 78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Insulation characteristics
Pollution degree | 2 |
Electrical properties
Electrical isolation | VCC // LTE // Ethernet // PE |
Maximum power dissipation for nominal condition | 4.8 W |
Mains type | Cellular communication |
Supply
Supply Voltage Range | 10 V DC ... 30 V DC (SELV, via pluggable Push-in terminal block) |
Typical current consumption | < 200 mA (24 V DC) |
Typical current consumption | 65 mA (With activated energy-saving mode) |
Max. current consumption | 1.7 A |
Function
Management | Web-based management, SNMP |
Digital
Description of the input | Digital input |
Number of Inputs | 2 |
Voltage input signal | 10 V DC ... 30 V DC |
Switching level "1" signal | 10 V DC ... 30 V DC |
Signal
Output name | Digital output |
Number of Outputs | 1 |
Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
Current Output Signal | ≤ 50 mA (Not short-circuit proof) |
Supply
Connection Method | Push-in spring connection |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
Single conductor/terminal point, rigid | 0.14 mm² ... 1.5 mm² |
Single-wire/terminal point, flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section AWG | 26 ... 16 |
Stripping length | 9.00 mm |
Interfaces
Signal | Ethernet |
Web server | yes |
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
Serial transmission speed | 10/100 Mbps, auto negotiation |
Connection Method | RJ45 jack, shielded |
No. of channels | 2 (SELV) |
Transmission length | 100 m (shielded twisted pair) |
Protocols Supported | TCP/IP, UDP/IP, FTP, HTTP(S) |
Auxiliary protocols | ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS |
Wireless
Interface description | LTE (FDD) / UMTS |
Frequency Range | 700 MHz (LTE B13 / B17) |
Frequency Range | 850 MHz (LTE B5) |
Frequency Range | 1700 MHz (LTE B4) |
Frequency Range | 1900 MHz (LTE B2) |
Frequency Range | 850 MHz (UMTS/HSPA B5) |
Frequency Range | 1900 MHz (UMTS/HSPA B2) |
Data rate | ≤ 150 Mbps (LTE, DL) |
Data rate | ≤ 50 Mbps (LTE, UL) |
Antenna | 50 Ω impedance SMA antenna socket |
Antenna Connection Method | SMA (female) |
SIM Interface | 1.8 volt, 3 volt |
UMTS | HSPA 3GPP R9 |
LTE | CAT4 |
Country support | USA |
Dimensions
Width | 45 mm |
Height | 130 mm |
Depth | 126 mm |
Material specifications
Color (Upper housing part) | light grey (RAL 7035) |
Material (Housing) | Plastic |
Ambient conditions
Degree of Protection | IP20 (Manufacturer's declaration) |
Ambient Temperature (Operation) | -40 °C ... 70 °C (Maximum transmission power 5 dBm) |
Ambient Temperature (Operation) | -40 °C ... 60 °C (Maximum transmission power 23 dBm) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
UL, USA/Canada
Identification | Class I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc |
Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Corrosive gas test
Identification | ISA-S71.04-1985 G3 Harsh Group A |
Wireless approval USA, FCC
Certificate | N7NHL7588 |
EMC data
Noise immunity | EN 61000-6-2 |
Electromagnetic compatibility | Conformance with RED Directive 2014/53/EU |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | ± 6 kV (Test Level 3) |
Discharge in air | ± 8 kV (Test Level 3) |
Comments | Criterion B |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
Field intensity | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | ± 2 kV (Test Level 3) |
Signal | ± 2 kV (Ethernet) |
Comments | Criterion B |
Surge current load (surge)
Standards/regulations | EN 61000-4-5 |
Input | ± 0.5 kV (symmetrical) |
Input | ± 1 kV (asymmetrical) |
Signal | ± 1 kV (Data line, asymmetrical) |
Comments | Criterion B |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Emitted interference
Radio interference voltage in acc. with EN 55011 | Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 | Class B, area of application: Industry and residential |
Criteria
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Mounting
Mounting Type | DIN rail mounting |
Accessories
Why Proax for Phoenix Contact 2702533?
Proax is an authorized distributor of Phoenix Contact 2702533 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended