Official DistributorSKU
MPN
TC ROUTER 3002T-4G VZW
Weight
0.266 kg
Series TC-ROUTER
TC ROUTER 3002T-4G VZW - Router
Industrial LTE 4G router, version for Verizon wireless (US), 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output
- Industrial 4G cellular router (LTE)
- Cellular high-speed Internet connection up to 150 Mbps
- Networking of Ethernet end devices via the cellular network
- Ethernet SMS gateway for easy alerting
- Stateful inspection firewall for dynamic filtering
- NAT table and port forwarding for direct remote access to an end device
- Two switching inputs and one switching output
- Configuration via web-based management or microSD card
- Two local Ethernet connections
- Switchable energy-saving mode
- Integrated logbook
- Connection monitoring
- Extended temperature range of -40 °C … +70 °C
Technical Specifications
Utilization restriction
| CCCex note | Use in potentially explosive areas is not permitted in China. |
Product properties
| Application | Ethernet |
| MTTF | 383 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 184 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 78 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Insulation characteristics
| Pollution degree | 2 |
Electrical properties
| Electrical isolation | VCC // LTE // Ethernet // PE |
| Maximum power dissipation for nominal condition | 4.8 W |
| Mains type | Cellular communication |
Supply
| Supply Voltage Range | 10 V DC ... 30 V DC (SELV, via pluggable Push-in terminal block) |
| Typical current consumption | < 200 mA (24 V DC) |
| Typical current consumption | 65 mA (With activated energy-saving mode) |
| Max. current consumption | 1.7 A |
Function
| Management | Web-based management, SNMP |
Digital
| Description of the input | Digital input |
| Number of Inputs | 2 |
| Voltage input signal | 10 V DC ... 30 V DC |
| Switching level "1" signal | 10 V DC ... 30 V DC |
Signal
| Output name | Digital output |
| Number of Outputs | 1 |
| Voltage output signal | 10 V DC ... 30 V DC (depending on the operating voltage) |
| Current Output Signal | ≤ 50 mA (Not short-circuit proof) |
Supply
| Connection Method | Push-in spring connection |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
| Single conductor/terminal point, rigid | 0.14 mm² ... 1.5 mm² |
| Single-wire/terminal point, flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 26 ... 16 |
| Stripping length | 9.00 mm |
Interfaces
| Web server | yes |
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
| Serial transmission speed | 10/100 Mbps, auto negotiation |
| Connection Method | RJ45 jack, shielded |
| No. of channels | 2 (SELV) |
| Transmission length | 100 m (shielded twisted pair) |
| Protocols Supported | TCP/IP, UDP/IP, FTP, HTTP(S) |
| Auxiliary protocols | ARP, DHCP, PING (ICMP), SNMP V1/V2, SMTP(S), NTP, SSL/TLS, STARTTLS |
Wireless
| Interface description | LTE (FDD) |
| Frequency Range | 700 MHz (LTE B13) |
| Frequency Range | 1700 MHz (LTE B4) |
| Data rate | ≤ 150 Mbps (LTE, DL) |
| Data rate | ≤ 50 Mbps (LTE, UL) |
| Antenna | 50 Ω impedance SMA antenna socket |
| Antenna Connection Method | SMA (female) |
| SIM Interface | 1.8 volt, 3 volt |
| LTE | CAT4 |
| Country support | USA |
Dimensions
| Width | 45 mm |
| Height | 130 mm |
| Depth | 126 mm |
Material specifications
| Color (Upper housing part) | light grey (RAL 7035) |
| Material (Housing) | Plastic |
Ambient conditions
| Degree of Protection | IP20 (Manufacturer's declaration) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (Maximum transmission power 5 dBm) |
| Ambient Temperature (Operation) | -40 °C ... 60 °C (Maximum transmission power 23 dBm) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
UL, USA/Canada
| Identification | Class I, Zone 2, AEx nA IIC T4 / Ex nA IIC T4 Gc |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
Corrosive gas test
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
Wireless approval USA, FCC
| Certificate | N7NHL7518 |
EMC data
| Noise immunity | EN 61000-6-2 |
| Electromagnetic compatibility | Conformance with RED Directive 2014/53/EU |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2 kV (Test Level 3) |
| Signal | ± 2 kV (Ethernet) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV (symmetrical) |
| Input | ± 1 kV (asymmetrical) |
| Signal | ± 1 kV (Data line, asymmetrical) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Radio interference voltage in acc. with EN 55011 | Class B, area of application: Industry and residential |
| Emitted radio interference in acc. with EN 55011 | Class B, area of application: Industry and residential |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
2702274 - Multiband cellular antenna for wall mounting, 0.5 m antenna cable, with SMA circular connector, suitable for LTE/4G
2900980 - Cellular antenna cable, 5 m in length, SMA (male) -> SMA (female), 50 ohm impedance- 2900981 - Cellular antenna cable, 10 m in length, SMA (male) -> SMA (female), 50 ohm impedance
2917324 - Antenna adapter, frequency range: 0.3 GHz ... 6 GHz, connection: SMA (female) -> SMA (male), angled 90°
Why Proax for Phoenix Contact 2702532?
Proax is an authorized distributor of Phoenix Contact 2702532 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2702528 - Industrial 4G LTE router, European version, fallback to 3G UMTS/HSPA+ and 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output
2702529 - Industrial 3G router, European version, fallback to 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, IPsec and OpenVPN support, SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output- 2702530 - Industrial LTE 4G router, European version, fallback to 3G UMTS/HSPA and 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, 2x SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output
- 2702531 - Industrial 3G router, European version, fallback to 2G GPRS/EDGE, 2 Ethernet interfaces, firewall, NAT, SMA-F antenna socket, SMS and e-mail transmission, 2 digital inputs, 1 digital output
Routeur 4G LTE industriel, appareil de l'UE, procédure de repli 3G (UMTS/HSPA) et 2G (GPRS/EDGE), point d'accès WLAN 802.11a/b/g/n 150 Mbit/s 2,4 GHz + 5 GHz, switch à 2 ports, pare-feu, NAT, compatibilité IPsec et OpenVPN, 2 DI, 1 DO, RS-232/RS-485