Enclosure Accessories

FT Operating panel, WHD: 377x597x36 mm, for AE enclosures instead of the door and surfaces

AX Base/plinth trim panels, sides, H: 200 mm, for D: 300 mm

VX Punched section, with mounting flange 14 x 39 mm, for door width: 400 mm

VX Punched section with mounting flange, 14 x 39 mm , for door width: 760 mm

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 300 mm, sheet steel

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 1100 mm, sheet steel

VX Base/plinth trim panel, side, H: 100 mm, for D: 1000 mm, sheet steel

VX Base/plinth trim panel, side, H: 200 mm, for D: 1000 mm, sheet steel

VX Base/plinth trim panel, side, H: 200 mm, for D: 1200 mm, sheet steel

VX Roof plate, Wdepth 600x600 mm, for cable entry glands

IP 2X roof plate with ventilation hole for VX, VX IT (NCNR)

SM TFT - / Monitor holder

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

Base/Plinth components, front and rear, stainless steel 316, 200 mm.

VX Punched section, with mounting flange 23 x 89 mm, for W/D: 800 mm, stainless steel

SZ Plastic gland plates, for AX, for cable entry, modular, pre-punched, WD: 436x221 mm, for gland plates size 7

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

SZ adapter rail for VX compatibility, for H: 1800 mm

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

DK Side panel, divided, For TS IT, HxD: 2000x1050 mm, Including cam lock with secure lock 3524 E, Sheet steel