Enclosure Accessories

SV Partial door, WH: 800x600 mm, for TS, with viewing window

SV Partial door, WH: 800x1600 mm, for TS

SV Front trim panel, for TS, top, WH: 400x300 mm, protection category IP 54

SV Front trim panel, for TS, bottom, WH: 400x100 mm, protection category IP 54

SM Keyboard support, for command panels or surfaces

DK Component shelf, WHD: 419x1 Ux700 mm, 50 kg, distance between levels: 600-900 mm, Pull-out, RAL 9005

SZ Punched rail 23 x 23 mm, for TS, SE, for WHD: 2200 mm, L: 2095 mm

DK Cable management panel, 1 U, with steel rings

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

VX Levelling component, for base/plinth H: 200 mm

VX Base/plinth installation bracket, for base/plinth, sheet steel and stainless steel, for base/plinth trim panels H: 100 / 200 mm

VX Baying cover, for base/plinth system VX, sheet steel and stainless steel, for H: 200 mm

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 600 mm, stainless steel, 1.4301

VX Base/plinth trim panel, side, H: 100 mm, for D: 600 mm, stainless steel, 1.4301

The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

VX Cable clamp rail, mounting angle, for W: 1000 mm

VX Metal multi-tooth screw, for stainless steel, size: 5x13 mm

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 800 mm, stainless steel, 1.4301

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 200 mm, for W: 800 mm, stainless steel, 1.4301

VX Base/plinth trim panel, side, H: 100 mm, for D: 500 mm, stainless steel, 1.4301