PLC & HMI

Cable

I/O expansion rack connecting cable for NJ/CJ/CS-series, 3 m

I/O expansion rack connecting cable for NJ/CJ/CS-series, 5 m

CS1-C200H backplane connecting cable, 70 cm

Analog output unit, 8 x outputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -10 to 10 V, resolution 12 bit, screw terminals

Digital input unit, 16 x 200-240 VAC inputs

Motion Control Module

Digital output unit, 16 x triac outputs, 0.5 A, 250 VAC

Digital output unit, 32 x transistor outputs, PNP with short circuit protection, 0.5 A, 24 VDC

Digital output unit, 64 x transistor outputs, PNP with short circuit protection, 0.3 A, 24 VDC

CP2E series compact PLC - Network type; 12 DI, 8DO; NPN output; Power supply 24 VDC; 10 kStep Program memory

Digital output unit, 96 x transistor outputs, NPN, 0.1 A, 12-24VDC

Isolated analog output unit, 4 x outputs 4 to 20mA, 1 to 5 V, resolution 1:4,000

Isolated thermocouple input unit, 4 x inputs type B, E, J, K, N,R, S, T,± 80mV, 150 ms/4 inputs

Isolated thermocouple input unit, 4 x inputs type K, J, L, R, S, T, B, resolution 0.1°C

Isolated thermocouple input unit, 8 x inputs type K, J, L, R, S, T, B, resolution 0.1°C

High Speed Counter Unit

Isolated RTD input unit, 8 x inputs Pt100 (JIS, IEC), JPt100, resolution 0.1°C

Serial communications board, 2 x RS-232C ports, supports protocol macro backup from memory card

Serial communications unit, 2 x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave