PLC & HMI

CS1-C200H backplane connecting cable, 70 cm

1 License SYSSTDIOLT Software

Analog output unit, 8 x outputs 1 to 5 V, 0 to 5 V, 0 to 10 V, -10 to 10 V, resolution 12 bit, screw terminals

Digital input unit, 16 x 200-240 VAC inputs

Motion Control Module

Digital output unit, 16 x triac outputs, 0.5 A, 250 VAC

Digital output unit, 32 x transistor outputs, PNP with short circuit protection, 0.5 A, 24 VDC

Digital output unit, 96 x transistor outputs, NPN, 0.1 A, 12-24VDC

Isolated analog output unit, 4 x outputs 4 to 20mA, 1 to 5 V, resolution 1:4,000

Isolated thermocouple input unit, 4 x inputs type B, E, J, K, N,R, S, T,± 80mV, 150 ms/4 inputs

Isolated thermocouple input unit, 4 x inputs type K, J, L, R, S, T, B, resolution 0.1°C

Isolated thermocouple input unit, 8 x inputs type K, J, L, R, S, T, B, resolution 0.1°C

Isolated RTD input unit, 8 x inputs Pt100 (JIS, IEC), JPt100, resolution 0.1°C

Serial communications unit, 2 x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave

Space unit for vacant I/O slots on CS1 backplane

DeviceNet digital input unit, 16 x inputs, 24 VDC, NPN, 3-tier screw terminal block

DeviceNet digital input unit, 16 x inputs, 24 VDC, PNP, 3-tier screw terminal block

DeviceNet digital input unit, 32 x inputs, 24 VDC, with open/short circuit detection, PNP, screwless push-in connection

DeviceNet digital I/O unit, 8 x inputs and 8 x outputs 0.3 A, 24 VDC, PNP, sensor connector terminals

DeviceNet digital I/O unit, 16 x inputs and 16 x outputs 0.3 A, 24 VDC, NPN, MIL connector (not included)