Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Conventional Free-air Thermal Current (Ith)

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 35 A, acc. to IEC 60947-5-1, q = 40 °C 16 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 160 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 35 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 500 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 275 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 250 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 350 A

acc. to IEC 60947-4-1, Open Contactors q = 40 °C 400 A

Number of Auxiliary Contacts NC

Number of Auxiliary Contacts NO

Rated Control Circuit Voltage (Uc)

50 Hz 500 V, 60 Hz 600 V

50 Hz 24 ... 60 V, 60 Hz 24 ... 60 V, DC Operation -

50 Hz 48 ... 130 V, 60 Hz 48 ... 130 V

50 Hz 110 ... 125 V, 60 Hz 110 ... 125 V, DC Operation 110 ... 125 V

50 Hz 220 ... 240 V, 60 Hz 220 ... 240 V, DC Operation 220 ... 240 V

50 Hz 100 ... 250 V, 60 Hz 100 ... 250 V, DC Operation 100 ... 250 V

Rated Operational Voltage

Main Circuit 690 V

Auxiliary Circuit 690 V

Auxiliary Circuit 690 V AC

Main Circuit 1000 V

Auxiliary Circuit 250 V DC

Main Circuit 690 V AC

Main Circuit 220 V DC

Auxiliary Circuit 440 V DC

Main Circuit 440 V DC

Main Circuit 1500 V

Main Circuit 250 V DC

Auxiliary Circuit 240 V AC

Auxiliary Circuit 250 V

Auxiliary Circuit 690 V, Main Circuit 690 V

Auxiliary Circuit 125 V

Auxiliary Circuit 24 ... 690 V

Main Circuit 1000 V AC

Auxiliary Circuit 600 V

Auxiliary Circuit 240 V

Terminal Type

Screw Terminals

Main Circuit: Bars

Push-in Spring Terminals

Ring-Tongue Terminals

Spring Terminals

Flat-Pin Connections

Soldering Pins

Double Clamp

Cable Clamp

No Terminals 

Omron

Sprecher Schuh

The AF12N0-30-10-13 is a 3 pole - 600 V UL, NEMA size N0 contactor with 1 built-in auxiliary contact and Screw, switching power circuits up to 28 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of  accessories.

AF12N0-30-10-13

AF12N0-30-10-13 100-250V50/60HZ-DC Contactor

The AF16-22-00-14 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (250-500 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF16-22-00-14

AF16-22-00-14 250-500V50/60HZ-DC Contactor

The AF26N1-30-11-13 is a 3 pole - 600 V UL, NEMA size N1 contactor with pre-mounted auxiliary contacts and Screw, switching power circuits up to 45 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of  accessories.

AF26N1-30-11-13

AF26N1-30-11-13 100-250V50/60HZ-DC Contactor

The AF26Z-40-00-23 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 11 kW / 400 V AC (AC-3) and switching power circuits up to 45 A (AC-1) or 45 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF26Z-40-00-23

AF26Z-40-00-23 100-250V50/60HZ-DC Contactor

AS09 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC or 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. The AS..S contactors are the spring terminal version of the AS... range. The AS... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

AS09-30-10S-20

The B7-30-10-F mini contactor is a compact 3 pole contactor with 1 auxiliary contact and flat pin connection. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A (AC-1) or switching of control signals. Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

B7-30-10-F-84

B7-30-10-F-84 Mini Contactor 110 ... 127 V AC - 3 NO - 0 NC - Flat-Pin Connections

Busbar kit for connecting contactor to T-max type MCCB in a vertical mounting position

BEA300/T5

The BSM6-30 reversing connecting link is used to connect the main poles of two 3-pole contactors 
mounted side by side. The BSM6-30 reversing connecting link is made up of 1 insulated upstream and 1 insulated downstream connections and suitable for all VB6/VB7 mini reversing contactors. The connector ensures a quick and safe connection of the contacts.

BSM6-30

CADP90-11

The AF16-22-00-13 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF16-22-00-13

AF16-22-00-13 100-250V50/60HZ-DC Contactor

DP25C3P-1 DP contactor provide outstanding performance in various HVAC application and meet all relevant standards, including UL, CSA and IEC. Industry standard mounting plate provides easily accessible mounting holes.

DP25C3P-1

The K6-31Z-F mini contactor relay is a compact 4 pole contactor relay with flat pin connection. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors relays are used in residential buldings, commercial buildings and industrial applications for switching of control signals up to 3 A / 400 V (AC-15). Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

K6-31Z-F-01

K6-31Z-F-01Mini Contactor Relay24 V AC3NO1NCFlat-Pin Connections

J7KC-12-10 DC24

Motor Contactor, 3 Poles, Push-In Plus Terminals, up to 5.5 kW, 24 VDC,  Contacts: NO 3 NC 0, H×W×D 67.5 x 45 x 46 mm

The AF12Z-30-10K-21 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and Push-in spring terminals, controlling motors up to 5.5 kW / 400 V AC (AC-3) or 7-1/2 hp / 480 V UL and switching power circuits up to 28 A (AC-1) or 28 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF12Z-30-10K-21

AF12Z-30-10K-21 24-60V50/60HZ 20-60VDC Contactor

RV5/133 is a varistor surge suppressor designed to reduce the maximum overvoltage peak value and to limit or even completely eliminate the high pre-damping voltage frequencies, when used with an AC operated conventional contactor for a rated control circuit voltage between 50 ...133 V AC 50/60Hz or with a DC operated conventional contactor for a rated control circuit voltage between 50 ...133 V DC. 
The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components.
Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals.
Advantages:
- the surge suppressor is clipped onto the top or side part in regards with the contactor or contactor relay base design without change in device overall dimensions.
- high energy absorption: good damping - Unpolarized system.
Drawback: clipping as from the varistor operating voltage, thus voltage front up to this point.

RV5/133

CA7-37-00-24Z

Contactor, 37 A, IEC, 24V 50 / 60Hz, 3 Poles, Screw Terminals

UA50-30-00-RA-51

Interlock unit for mechanical interlocking of two vertical mounted a.c. or d.c. operated contactors of same or different rating according to cataog table

VM300V

CA6-140-EI-11-120

Contactor, 140A, 3P, 125HP/575V, 120VACcoil

CA7-16-10-220W

Contactor, 16 A, IEC, 200-220V 50Hz / 208-240V 60Hz, 3 Poles, 1NO Aux Contact, Screw Terminals

The CA8 miniature contactors and starters provide an extremely compact and reliable method of controlling motors of 7.5 HP or less (@460V). The CA8 contactor is an economical choice for applications where space is limited or where a minimal enclosure is desired. Components are DIN-rail mountable for instant installation and modification. Fittings are also included on the CA8 for base mounting. All terminals are clearly marked and shipped in the open position for installation with either manual or power screwdrivers.<ul><li>Small And Rugged</li><li>Electrical life of 700,000 operations</li><li>Mechanical life of 10,000,000 operations.</li><li>Accessories Require No Additional Panel Space</li><li>Class 10 motor protection</li><li>Manual or Automatic reset</li><li>NO and NC contacts</li><li>Adjustable overload dial</li><li>Trip indication</li></ul>

Series CA8 Contactors

The CA7 contactor series represents the most modern and flexible IEC power contactor available today. A wide selection of contactors covers the entire CA7 horsepower range (up to 75HP @ 460/575V). Six of the contactors are only 45mm wide, an extremely small footprint for such rugged performance.<ul><li>Same Small Size for Most DC Applications</li><li>Type 1 And Type 2 Coordination</li><li>Advanced Safety And Reliability Features</li><li>Modular Accessories Are Common To All Devices</li><li>Reversible Coil Provides Total Flexibility</li><li>Dual Power Terminals Speed Wiring</li><li>CA7 contactors meet IEC, UL and CSA standard requirements.</li><li>CAN7 contactors are UL Listed and rated in accordance with the requirements of NEMA standards publication ICS-2 (NEMA rated).</li><li>CNX contactors are standard CA7 contactors that have been tested, approved and labeled by UL for heating ventilation and air conditioning (HVAC) applications.</li><li>CAL7 Lighting Contactors are used to control a wide variety of lighting loads.</li><li>CA7Y2 hydraulic elevator wye-delta contactors are a special application that consists of a pair of mechanically</li></ul>

Series CA7 Contactors

Sprecher + Schuh’s CA9 contactor line combines the simple function of our popular CA7 series with the rugged performance demanded in this wide horsepower range. CA9 contactors offer a smaller footprint than traditional contactors in this size class.<ul><li>116…2650 A</li><li>AC or DC operation</li><li>UL508, IEC 60947</li><li>Up to 600V (UL) and 1000V (IEC)</li><li>Reversible coil terminations</li><li>Mechanical interlocks</li><li>Front or side mount auxiliary contacts</li><li>Compatible with electronic overload relay</li><li>PLC interface capable</li></ul>

Series CA9 Contactors

Sprecher + Schuh's definite purpose contactors are ideal for commercial applications including air conditioning, refrigeration, resistive heating and many other installations where a low cost, high performance contactor is needed. These devices offer flexibility and are designed to meet or exceed electrical and mechanical requirements as defined by definite purpose contactor standards.<ul><li>Universal mounting plate</li><li>25A &amp; 30A have screw power terminals that will accept ring-tongue terminals</li><li>40A and larger have box power terminals</li><li>Dual quick-connect power terminals on all sizes</li><li>Dual quick-connect coil terminals on all sizes</li><li>Double break power contact design with feed-thru wiring</li><li>Class B (130°C) coil insulation</li><li>Double E magnet assembly</li></ul>

Series CDP2 Contactors

Each sub-series features integrated electronic coils that reduce energy consumption by up to 80%, provide surge protection, and allow operation across wide voltage ranges without coil changes. ABB also offers auxiliary contact blocks and accessories to enhance functionality

AF 3-pole Contactors

Secure uptime and optimize stock management with AF technology, offering superior performance and energy savings (up to 80% reduction). The electronically controlled coil ensures stability against voltage drops and sags, while ABB’s global product range simplifies logistics.Key Features:<ul><li>Up to 1000 A, 690 V AC-1 and 540 A, 600 V general use</li><li>Wide voltage range: 24 V - 500 V AC / 20 V - 500 V DC</li><li>Built-in surge suppression</li><li>Snap-to-connect accessories for easy installation</li><li>Mirror and mechanically linked contacts for safety</li></ul>

AF 4-pole Contactors

AFS contactors are specifically designed to enhance safety in machine applications. Featuring factory-mounted contact blocks with mechanically linked and mirror contacts, these contactors ensure reliable monitoring and control of circuits. With ABB’s comprehensive safety component range, building protection systems becomes more straightforward and efficient.<h4>Main Benefits:</h4><ul><li>Safety Compliance: Meets major safety standards (EN ISO 13849 and EN 62061) for secure machinery and equipment use.</li><li>Guaranteed Status: Factory-mounted auxiliary contact blocks ensure accurate contactor status monitoring.</li><li>Easy Identification: Distinct yellow housing simplifies safety chain recognition.</li><li>Streamlined Safety Calculations: Safety values available in FSDT and Sistema tools for easier safety level assessments.</li></ul><h4>Main Features:</h4><ul><li>High Power Handling:<ul><li>Up to 400 kW at 400 V AC-3</li><li>Up to 600 hp at 480 V</li><li>Up to 1050 A at 690 V AC-1</li><li>Up to 900 A for general use</li></ul></li><li>Certified Safety Contacts: Mirror and mechanically linked contacts with third-party certification.</li><li>Fast Response: Opening times as low as 20 ms in certain models with PLC interfaces.</li><li>Precision Switching: Low-energy auxiliary contacts with a minimum switching capacity of 12 V, 3 mA (10⁻⁷).</li><li>Built-in Protection: Integrated surge suppression for enhanced safety.</li></ul>

AFS contactors for safety applications

ABB&#39;s installation contactors are designed for noise-sensitive environments, featuring a hum-free operation that sets them apart from conventional contactors. With a wide range of ratings from 16 A to 100 A, they are ideal for controlling lighting, heating, ventilation, motors, and pumps in residential and commercial buildings. The innovative AC/DC design eliminates hum, while tool-free accessories and manual or automatic versions provide added flexibility and convenience.<h4>Main Benefits:</h4><ul><li>Hum-Free Operation: Perfect for noise-sensitive settings, offering quiet and reliable switching.</li><li>Tool-Free Installation: Easily mount auxiliaries, space holders, and security covers without tools.</li><li>Compact Group Mounting: No need for distance pieces between ESB16..N and ESB/EN20..N contactors.</li><li>Flexible Packaging: Available in single and multi-pack options to meet your specific needs.</li><li>Efficient Warehousing: Simplified logistics with one auxiliary contact block, AC/DC control, and EAN coding on each device.</li></ul><h4>Main Features:</h4><ul><li>Versatile Range: Covers a wide range from 16 A to 100 A, suitable for various applications.</li><li>Certified for Safety: Meets IEC60947-4-1, IEC61095, and other global standards, including marine certification.</li><li>Built-in Protection: Integrated circuit safeguards against remote lightning strikes and overvoltages.</li><li>Dual Operation Modes: EN specialty types offer both automatic and manual operation with a convenient toggle switch.</li></ul>

Installation Contactors

The CR360L series lighting contactors are electrically held and designed to provide efficient lighting control in both industrial and commercial settings. Built on the reliable and proven NEMA starter platform, these contactors are available in a range of frame sizes to accommodate various load requirements. With current ratings from 30 to 300 amps, they are ideal for controlling lighting systems that include fluorescent, mercury arc, tungsten, and sodium lamp loads.<h4>Key Benefits:</h4><ul><li>Versatile Application: Suitable for a wide range of industrial and commercial lighting applications.</li><li>Proven Reliability: Built on the trusted NEMA starter framework for consistent performance.</li><li>Flexible Configuration: Available in five frame sizes to match different load requirements.</li><li>Wide Current Range: Supports 30 to 300 amp ratings with 2- and 3-pole versions.</li></ul><h4>Product Features:</h4><ul><li>Durable Design: Engineered to handle fluorescent, mercury arc, tungsten, and sodium lamp loads.</li><li>Flexible Installation: Multiple frame sizes ensure adaptability to various applications.</li><li>High Capacity: Ideal for both medium and heavy-duty lighting control in industrial environments.</li></ul>