Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Sprecher Schuh

160M  Lighting Contactor - Mechanical Held,3Poles,200Amps,120V coil,open bus

CR160MC7502A

MS132-1.0K

The TF42-B thermal overload relays are economic electromechanical protection devices for the main circuit, complying with the latest railway rolling stock standards and allowing installation in passengers or driver cabins for trains frequently operating tunnels or undergrounds.
They offer a reliable protection for motors in the event of overload or phase failure. The devices have trip
class 10.
The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows
through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over
current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a
change of the contacts switching position (95-96 / 97-98).
– Manual or automatic reset selectable
– Phase loss sensitive acc. to IEC/EN 60947-4-1
– TEST and STOP function – Trip indication on the front
– Temperature compensation
– Suitable for three- and single-phase applications
– designed in accordance to the applicable parts of IEC 60077 standard
– shocks and vibration withstand conforming to IEC 61373 (category 1, class B)
– usable according to European fire and smoke safety standard EN 45545-2

TF42-20B

TF42-20B Thermal Overload Relay 16 ... 20 A

VEM4K is a mechanical and electrical interlock set for the interlocking interlocking side-by-side without additional width of two AF09 ... AF38..K or AFC09 ... AFC38..K contactors equipped with Push-In Spring terminals.
VEM4K set includes a mechanical interlock unit VM4 with 2 fixing clips (BB4) and a VE4K electrical interlock block with A2-A2 connection.
Fixing the electrical interlock block on the front of the contactors connects the 2 built-in N.C. interlocking contacts to the two coils saving up to 50% less wiring compared to conventional electrical interlocking.
VE4K block must be used with A2-A2 connection to respect the electrical connection diagram.

VEM4K

VEM4K Mechanical and Electrical Interlock Set

TF42-1.0B

TF42-1.0B Thermal Overload Relay 0.74 ... 1.0 A

TF42-1.3B

TF42-1.3B Thermal Overload Relay 1.0 ... 1.3 A

TF42-1.7B

TF42-1.7B Thermal Overload Relay 1.3 ... 1.7 A

TF42-2.3B

TF42-2.3B Thermal Overload Relay 1.7 ... 2.3 A

TF42-35B

TF42-35B Thermal Overload Relay 29 ... 35 A

TF42-7.6B

TF42-7.6B Thermal Overload Relay 5.7 ... 7.6 A

CA7-TC714E

ESB40-40N-06

<h3>ELR W3- 24DC/500AC- 2 - Solid-state reversing contactor</h3>Three-phase solid-state reversing contactor with 24 V DC input, 2 A output current, zero voltage switch, optionally with thermal fuse<ul><li>Optional thermal fuse</li><li>Stable and short switching times</li><li>Noise and wear-free switching</li><li>Long service life</li><li>Integrated protection circuit</li><li>Integrated locking and load wiring</li><li>High switching frequency</li></ul>

2297293

Solid-state reversing contactor - ELR W3- 24DC/500AC- 2

<h3>ELR W2+1- 24DC/500AC-37 - Solid-state reversing contactor</h3>Three-phase solid-state reversing contactor with 24 V DC input, 37 A output current, zero voltage switch, optionally with thermal fuse<ul><li>Optional thermal fuse</li><li>Stable and short switching times</li><li>Long service life</li><li>Noise and wear-free switching</li><li>Integrated protection circuit</li><li>High switching frequency</li><li>Integrated locking and load wiring</li></ul>

2297374

Solid-state reversing contactor - ELR W2+1- 24DC/500AC-37

BER16-4KF is a connection set used to connect the main poles of two 3-pole AF09..K ... AF16..K, AFC09..K ... AFC16..K contactors mounted side by side.
The connection sets are made up of:
• 1 upstream and 1 downstream connections
• Insulated, solid copper bars
• Black fork pieces for a quick dismounting of reversing contactors.
With the Push-in Spring terminals, one push is all you need for a faster than ever installation, an easier than ever wiring and a reliable as ever connection.

BER16-4KF

BER16-4KF Connection Set for Reversing Contactors

The VB7-30-01-F mini reversing contactor is a compact 3 pole contactor with 1 auxiliary contact, flat pin connection and normal mechanical interlock. They are ideally suited for applications where reliability is a must and space is at a premium. Mini reversing contactors are used in residential buldings, commercial buildings and industrial applications for the control of three-phase motor loads up to 5.5 kW (AC-3). Further features are the silent coil, a switch position indication and the integrated possibility for rail or wall mounting.

VB7-30-01-F-84

VB7-30-01-F-84 Mini Reversing Contactor 110 ... 127 V AC - 3 NO - 0 NC - Flat-Pin Connections

The VBC6A-30-10-P mini reversing contactor is a compact 3 pole contactor with 1 auxiliary contact, soldering pins and mechanical interlock and safety blocking. They are ideally suited for applications where reliability is a must and space is at a premium. Mini reversing contactors are used in residential buldings, commercial buildings and industrial applications for the control of three-phase motor loads up to 4 kW (AC-3). Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail mounting.

VBC6A-30-10-P-01

VBC6A-30-10-P-01 Mini Reversing Contactor 24 V DC - 3 NO - 0 NC - Soldering Pins

The VBC7-30-01-F mini reversing contactor is a compact 3 pole contactor with 1 auxiliary contact, flat pin connection and normal mechanical interlock. They are ideally suited for applications where reliability is a must and space is at a premium. Mini reversing contactors are used in residential buldings, commercial buildings and industrial applications for the control of three-phase motor loads up to 5.5 kW (AC-3). Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.

VBC7-30-01-F-05

VBC7-30-01-F-05 Mini Reversing Contactor 220 ... 240 V DC - 3 NO - 0 NC - Flat-Pin Connections

The VBC7-30-01-P mini reversing contactor is a compact 3 pole contactor with 1 auxiliary contact, soldering pins and normal mechanical interlock. They are ideally suited for applications where reliability is a must and space is at a premium. Mini reversing contactors are used in residential buldings, commercial buildings and industrial applications for the control of three-phase motor loads up to 5.5 kW (AC-3). Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail mounting.

VBC7-30-01-P-05

VBC7-30-01-P-05 Mini Reversing Contactor 220 ... 240 V DC - 3 NO - 0 NC - Soldering Pins

VBC7-30-01-P-07

VBC7-30-01-P-07 Mini Reversing Contactor 12 V DC - 3 NO - 0 NC - Soldering Pins

The CA8 miniature contactors and starters provide an extremely compact and reliable method of controlling motors of 7.5 HP or less (@460V). The CA8 contactor is an economical choice for applications where space is limited or where a minimal enclosure is desired. Components are DIN-rail mountable for instant installation and modification. Fittings are also included on the CA8 for base mounting. All terminals are clearly marked and shipped in the open position for installation with either manual or power screwdrivers.<ul><li>Small And Rugged</li><li>Electrical life of 700,000 operations</li><li>Mechanical life of 10,000,000 operations.</li><li>Accessories Require No Additional Panel Space</li><li>Class 10 motor protection</li><li>Manual or Automatic reset</li><li>NO and NC contacts</li><li>Adjustable overload dial</li><li>Trip indication</li></ul>

Series CA8 Contactors

The CA7 contactor series represents the most modern and flexible IEC power contactor available today. A wide selection of contactors covers the entire CA7 horsepower range (up to 75HP @ 460/575V). Six of the contactors are only 45mm wide, an extremely small footprint for such rugged performance.<ul><li>Same Small Size for Most DC Applications</li><li>Type 1 And Type 2 Coordination</li><li>Advanced Safety And Reliability Features</li><li>Modular Accessories Are Common To All Devices</li><li>Reversible Coil Provides Total Flexibility</li><li>Dual Power Terminals Speed Wiring</li><li>CA7 contactors meet IEC, UL and CSA standard requirements.</li><li>CAN7 contactors are UL Listed and rated in accordance with the requirements of NEMA standards publication ICS-2 (NEMA rated).</li><li>CNX contactors are standard CA7 contactors that have been tested, approved and labeled by UL for heating ventilation and air conditioning (HVAC) applications.</li><li>CAL7 Lighting Contactors are used to control a wide variety of lighting loads.</li><li>CA7Y2 hydraulic elevator wye-delta contactors are a special application that consists of a pair of mechanically</li></ul>

Series CA7 Contactors

Sprecher + Schuh’s CA9 contactor line combines the simple function of our popular CA7 series with the rugged performance demanded in this wide horsepower range. CA9 contactors offer a smaller footprint than traditional contactors in this size class.<ul><li>116…2650 A</li><li>AC or DC operation</li><li>UL508, IEC 60947</li><li>Up to 600V (UL) and 1000V (IEC)</li><li>Reversible coil terminations</li><li>Mechanical interlocks</li><li>Front or side mount auxiliary contacts</li><li>Compatible with electronic overload relay</li><li>PLC interface capable</li></ul>

Series CA9 Contactors

The 3rd generation CEP7 solid state overload relays offer superior motor protection with advanced features like:<ul><li>Selectable trip class and field-installable modules</li><li>A wide current adjustment range of 5:1</li><li>Robust, self-powered design with mechanical and electrical mounting</li><li>Self-sealed latching mechanism</li><li>Single- and three-phase compatibility in same device allows for reduction in inventory SKUs</li></ul>The basic concept of utilizing Application Specific Integrated Circuits (ASICs) results in an affordable solid state overload relay. This kind of versatility and accuracy was simply not possible with traditional bimetallic or eutectic alloy electromechanical overload relays. The CEP7 offers dramatically lower energy requirements that save money and reduce panel space. Check out these advanced features.Wide Current Adjustment RangeCEP7-1EF Advanced Model offers:<ul><li>Adaptive-mount Expansion Port provides for<ul><li>Ground fault / Jam</li><li>Remote Reset</li></ul></li><li>Allows for Intelli-button options</li></ul>Selectable Trip Class &amp; Reset ModesCEP7-1EE Basic<ul><li>Manual reset mode</li><li>Trip class 10 and 20 (dip switches)</li></ul>CEP7-1EF Advanced<ul><li>Selectable manual or auto-manual reset modes</li><li>Trip class 10...30 (selectable dial)</li></ul>Ideal for light to medium industry processes<ul><li>Pump and Fan motors</li><li>Sawmills</li><li>Mixers</li><li> Conveyors</li></ul>

CEP7 Solid State Overload Relays

Sprecher + Schuh's KT9 series of Motor Circuit Controllers are some of the most versatile and technologically advanced control products available today. These devices can be used in a variety of control schemes that reduce panel space, simplify installation and eliminate the need for more expensive equipment.<ul><li>Current-limiting short circuit protection</li><li>Class 10 thermal overload protection</li><li>Switching</li><li>Signaling</li></ul>The KTC9 has a fixed magnetic trip set at 18…22x the maximum value of the current adjustment range (as opposed to the KTA9s magnetic trip of approximately 14x adjustment range.) KTC9 are typically used in applications where nuisance tripping might occur, as with some high efficiency motors.The KTB9 is designed without a thermal trip element (i.e., current adjustment range). It should be selected for applications where a separate motor overload protection device is used, such as on CLE7 Three Component Starters. Magnetic trip is approximately 14x operational current for the KTB9 (approximately 13x for the KTB7-45H).<ul><li>IEC/EN 60947–2, IEC/EN 60947-4-1</li><li>UL 60947-4-1</li><li>CSA C22.2, No. 60947-4-1</li><li>CB Scheme</li><li>CCC</li><li>CE Marked</li><li>cULus Listed</li><li>EAC</li><li>Morocco</li><li>UKCA</li></ul>

Series KT9 Control and Protection to 45A

Sprecher + Schuh’s Ecombo starters are the compact alternative to larger and higher priced combination starters. Both models consist of a KT9 Motor Circuit Controller (cULus listed as a Type E, self-protected combination starter), assembled with a CA7 or CA8 contactor, which provides remote operation (Type E/F). Whether used as a standalone starter or in multi-motor starter applications, Ecombo starters save significant panel space and dollars over conventional combination starter alternatives.The Ecombo starter line covers motors to 40A (KT9) / 45A (KT7), while providing current limiting short circuit protection up to 65kA. Class 10 thermal overload protection is also assured with a very accurate current adjustment setting which is factory calibrated to the smallest and largest current the unit can handle. A “differential tripping” mechanism also provides accelerated tripping under single phase conditions. Ecombo starters may be selected as Type 2 Coordinated per IEC 60947-4-1, or UL Construction Type E or F.<ul><li>0.10…45A Thermal Trip</li><li>2.2…585A Magnetic Trip</li><li>1/2…30HP @460V AC</li><li>AC or DC</li></ul>

Series Ecombo Combination Controllers

Sprecher + Schuh's complete series of KT Motor Circuit Controllers are available in compact, enclosed models up to 40 HP (@575V). The KTA9 Motor Circuit Controller and the CLE and CX7 Series of Combination Starters are preassembled in a variety of HP sizes and configurations yet have a compact housing for lower overall costs. KTU9 Molded Case Circuit Breakers are also available in a variety of standard enclosures for onsite assembly or shipped ready to install.<ul><li>Non-metallic IP65 (watertight, dust tight)</li><li>Type 4/4X/12 (watertight, dust tight, corrosion resistant)</li><li>Explosion Proof (Class I, Group B,C, D and Class II, Group E, F, G)</li></ul>

Enclosed Motor Circuit Controllers and Molded Case Circuit Breakers

Series KT5 devices are UL listed as Manual Motor Controllers (with optional approvals for Suitable as Motor Disconnect and Suitable for use in Group Installation).Group motor installations eliminate the need for individual branch short circuit protective devices for each motor circuit, reducing panel space, installation &amp; wiring time, and costs.There is only one Branch Circuit Protective Device (BCPD) for the “Group”.These devices meet requirement of Motor Protective Switching Devices (MPSD) as per IEC 60947-4-1 and Circuit Beaker as per IEC 60947-2 standard for application outside of North America.<ul><li>Overload protection – trip class 10A</li><li>Phase loss sensitivity</li><li>Disconnect function</li><li>Suitable for three- and single-phase applications</li><li>UL group motor and IEC Type 1and Type 2</li><li>International certifications</li><li>Interrupting rating @400V up to 100 kA</li></ul>

KT5 Control and Protection to 32A

Each sub-series features integrated electronic coils that reduce energy consumption by up to 80%, provide surge protection, and allow operation across wide voltage ranges without coil changes. ABB also offers auxiliary contact blocks and accessories to enhance functionality

Motor Control & Protection