Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Advantech

Oriental Motor

Curtis

Sprecher Schuh

Wittenstein

Hiwin

ACS880-01-021A-5+B056

400 – 480 VAC 3 Phase Input, 480 VAC 3 Phase Output, 21.0 Amps  - NEMA 12

ACS880-01-096A-5

ACS880 480V 3Ph VFD
96A, 75HPND
77A, 60HPHD
R6 Frame 
NEMA 1 Enclosed

R88M-1L2K030C-BS2

1S AC servo motor, 2 kW, 400 VAC, 3000 rpm, 6.37 Nm, absolute encoder, with brake

The ACS355 drives are designed to meet the requirements of an extensive range of machinery applications in food and beverage, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications. The drive is user-friendly, yet it provides a wide range of built-in technology such as the safe torque off functionality and sequence programming, reducing the need for additional control electronics. The product offers options and diverse functionality to cater to the needs set for speed and torque control of AC induction and permanent magnet motors.

ACS355-03U-09A8-2

LV AC Machinery Drive Module, 230 V (ACS355-03U-09A8-2)

The softstarter PSE250-600-70-1 has a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

PSE250-600-70-1

PSE250-600-70-1 Softstarter - 250 A - 208 ... 600 V AC

3G3MX2-A2037-V1

MX2 inverter drive, 3.7/5.5 kW (HD/ND), 17.5/19.6 A (HD/ND), 200 VAC, 3-phase input, sensorless vector, max. output freq. 580Hz

<h3>Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)</h3>BXII Series Driver

BXSD200-C2

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

<h3>AZ Series Closed Loop Driver (24/48 VDC)</h3> AlphaStep AZ Series Closed Loop Driver

AZD-K

ACS-355-03U-07A5-2

BHI62ST-30

200 W (1/4 HP) Induction Gear Motor (30:1 Gear Ratio)  (Three-Phase 200/220/230 VAC)

ACS880-01-119A-7+D150

ACS880-01-174A-7+D150

ACS880-01-07A4-7+B056

ACS880-01, Light Duty (110% overload) HP: 5 HP, Light Duty (110% overload) Output Current: 7 A, Heavy Duty (150% overload) HP: 3 HP, Heavy Duty (150% overload) Output Current: 5.6 A, Voltage: 600 VAC, Input Voltage Range: 525-690V, UL Type 12 (IP55)

<h3>AC Motor Speed Controller (Single-Phase 110/115 VAC)</h3>DSC Series speed controller for AC speed control motors.

DSCD25UA

AC Motor Speed Controller (Single-Phase 110/115 VAC)

ACS380040S25A04

R88M-K40030L-S2

G5 series AC servo motor, 400 W, 100 VAC, 3000 rpm, 1.3 Nm, Incremental encoder

<h3>Induction Motor</h3>Induction motors are optimal for uni-directional continuous operation such as a conveyor system.<ul><li>The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class</li><li>Approved under typical international safety standards; bears the CE marking</li><li>Gearhead required</li></ul>

BHI62ST-G2

R88A-CA1E010BFS-A

10 m Length High-Flexible Power/Brake Cable

<h3>120 W (1/6 HP) Brushless DC Motor</h3>The BLM Series features a a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance. *Connection Cable Required.

BLM5120HP-30FR

<h3>100 W (1/8 HP) Brushless DC Motor (15:1 Gear Ratio)</h3>The BLH Series combines a slim, high-power brushless DC motor with a 24 VDC board-type driver to meet your space-saving needs. Speed control range is 100 to 3000 r/min.

BLHM5100KC-15

100 W (1/8 HP) Brushless DC Motor (15:1 Gear Ratio)

 Gearheads

 Brushless DC Motors

Sprecher + Schuh offers a broad selection of pre-assembled or "build-from-stock" starters housed in a high impact, non-metallic, cUL approved, Type 1, 12, 4/4X enclosure. Built for convenience, space savings and economy, the KWIKstarter line is efficiently designed to use stock CA7/CAU7 contactors and advanced CEP7 solid state or CT7N thermal overloads. Contactor and overload are either prewired and pre-mounted onto the enclosure's built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.KWIKstarters control motors up to 30HP @ 460V (30HP @ 575V) in two enclosure sizes measuring only 208 x 98mm (8.19" x 3.86") or 250 x 125mm (9.84” x 4.92”). This covers over 85% of industrial motor control applications in a very compact package that can be mounted adjacent to or directly on equipment.KWIKstarters are available in UL sizes 9 to 43 amps, or NEMA labeled sizes 00, 0, 1 and 2. The enclosure and controls are designed for simplicity. A variety of control options and sizes make it a versatile off-the-shelf motor starter for a variety of common applications.<ul><li>cUL Approved</li><li>Type 1/12/4/4X</li><li>IP66</li><li>Up to 15 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Start-Stop, Multi-Function, H-O-A, Reversing, E-Stop</li><li>IEC or NEMA labeled</li><li>125 x 125 x 250 mm (5 x 5 x 10 in) max.</li></ul>

KWIKstarters

Sprecher + Schuh offers a complete line of combination and non-combination starters suitable for almost any HVAC/R application in the industry. Standard HVAC/R starters range from NEMA Size 00 up to NEMA size 3 (50HP @460V AC).Sprecher + Schuh Fractional Manual Starters (FMS) consist of a snap switch combined with a thermal overload device operating on the solder-ratchet principle. To reset the overload mechanism, the switch lever is moved to the OFF position. The motor can be restarted by simply pushing the switch lever to the ON position. The switch is designed to prevent being held closed under a sustained motor overload.Sprecher + Schuh NEMA labeled KWIKstarters are housed in a high impact, nonmetallic, cUL Approved, Type 1, 12, 4,4X enclosure. Built for convenience, space savings and economy, KWIKstarters are efficiently designed to use stock CAN7 contactors and CEP7 or CT7N overloads. Contactor and overload are either pre-wired and pre-mounted onto the enclosure’s built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.Standard starters include Non-combination, Fusible, Non-Fusible and Molded Case Circuit Breaker disconnects. All sizes are available in metallic Type 1 General Purpose or Type 3R Outdoor Rain tight enclosures. Three-phase and Single-Phase styles are available. An additional factory assembled option is the fireman damper interface, especially designed for meeting the needs of building and contractor specifications for shut down control.<ul><li>Features and Spec bullets</li></ul>

FMS & NEMA Labeled Starters

Sprecher + Schuh non-combination magnetic motor starters are intended to eliminate the purchase and assembly of a separate contactor, overload relay and associated wiring. When purchased with an enclosure, the starters are mounted and ready to install on receipt.At the heart of all magnetic starters is the Sprecher + Schuh CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Magnetic starters are equipped with Sprecher + Schuh's CEP7 solid state overload relay as a standard selection. Unlike traditional overload relays that indirectly sense motor current through heater elements, CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics. The electronics provide numerous advantages over electromechanical relays.<ul><li>cUL Approved</li><li>CE, CSA</li><li>Type 1/12/4/4X</li><li>Up to 900 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Non-Combination Starters

Sprecher + Schuh's through-the-door operated combination starters represent an economical alternative to the classic flange-operated solution. They are designed to meet rigid UL/NEC withstand specifications. Sprecher + Schuh has been building custom control panels with this design for years. Experience the durability of this product!At the heart of all Sprecher + Schuh combination starters is the CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Standard Sprecher + Schuh combination starters are equipped with the state of the art CEP7 solid state overload relay. CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics (ASICs). The electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Lockout/Tagout accessories</li><li>Quick make/quick break, non-teasing action</li><li>Suitable for interrupting up to 200,000 amperes when class "J" fuses are used</li><li>UL98 standards for service entrance requirements</li><li>NFPA 79</li><li>cUL, CE, CSA</li><li>Type 1/12/4/4X or 3R</li><li>Up to 500 HP @ 600V AC</li><li>AC and DC</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Combination Starters

All standard Sprecher + Schuh starters use the CAT7 or CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity. Protecting these specialty starters is the state of the art CEP7 solid state overload relay. The CEP7 electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Contactor (with AC coil)</li><li>Overload relay protection</li><li>Thermal magnetic circuit breaker</li><li>J-Type Fuses</li><li>Selection of cover controls</li><li>Enclosures Type 1, 4, 4X, 12, 3R</li><li>Oversized back pan for plenty of wiring space</li><li>UL approved</li></ul>

RVAT, Multi-Speed & Pump

The PF Softstarter Controller provides intelligence, unmatched performance, flexibility, and diagnostics in a modular compact design for controlling either a standard squirrel-cage induction motor or a star-delta motor. Seven standard, and two optional starting modes of operation are available within a single controller.As standard, this true three-phase controlling device includes electronic overload protection with programmable trip class, integral run bypass, increased motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. The PF Controller comes equipped with a built-in keypad and LCD display for programming the controller parameter settings for the specific industrial application.Three starting modes<ul><li>PFS Standard</li><li>PFB Pump Control</li><li>PFD Braking Control</li></ul><ul><li>16 Current Models</li><li>Control Voltage: 120-240VAC or 24V AC/DC</li><li>Voltage Range: 200...600VAC 3...400HP @460VAC</li><li>Standard 3-wire or Y-Delta motor connections</li><li>Built-in Bypass Contactor</li><li>Built-in Electronic Motor Overload Protection</li></ul>

Series PF Softstarters

ACS580 Drives Key Features:<ul><li>All-in-One Design: Comes with built-in features and components, reducing the need for external devices and simplifying installation.</li><li>Easy to Use: Intuitive user interface with startup assistants and a simple menu structure for quick commissioning and operation.</li><li>Versatile Applications: Suitable for both variable and constant torque loads like pumps, fans, conveyors, mixers, and compressors.</li><li>Energy Efficiency: Includes features like an energy optimizer to improve efficiency and reduce electricity consumption.</li><li>Safety First: Integrated safety functions such as Safe Torque Off (SIL 3) ensure machine and personnel safety.</li></ul><h3>Technical Highlights:</h3><ul><li>Power Range: 0.75 kW to 500 kW</li><li>Voltage Range: 200 V to 480 V</li><li>Enclosures Available: IP00, IP20, IP21, IP42, IP54, IP55</li><li>Communication &amp; Compatibility: Part of ABB’s “all-compatible” drive family with consistent interface and architecture for easy integration.</li></ul>

Motor & Drives