Moteurs et Variateurs de fréquences

400 – 480 VAC 3 Phase Input, 480 VAC 3 Phase Output, 21.0 Amps - NEMA 12

ACS880 480V 3Ph VFD 96A, 75HPND 77A, 60HPHD R6 Frame NEMA 1 Enclosed

Servomoteur rotatif de la série 1S d'une capacité de 2 kW

LV AC Machinery Drive Module, 230 V (ACS355-03U-09A8-2)

The softstarter PSE250-600-70-1 has a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Courant de couple de 17,5 A et entraînement à courant alternatif de 7-1/2 hp à couple variable

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

AZ Series Closed Loop Driver (24/48 VDC)

ACS-355-03U-07A5-2 2HP 3P 208V AC Drive

200 W (1/4 HP) Induction Gear Motor (30:1 Gear Ratio) (Three-Phase 200/220/230 VAC)

ACS880 600V 125HPld/100HPhd+BC

ACS880 600V 200HPld/150HPhd+BC

ACS880-01, Light Duty (110% overload) HP: 5 HP, Light Duty (110% overload) Output Current: 7 A, Heavy Duty (150% overload) HP: 3 HP, Heavy Duty (150% overload) Output Current: 5.6 A, Voltage: 600 VAC, Input Voltage Range: 525-690V, UL Type 12 (IP55)

AC Motor Speed Controller (Single-Phase 110/115 VAC)

Drive 15HP ND, 10HP HD, 480V

Servomoteur rotatif de la série G5 d'une capacité de 400 W

Induction Motor

Câble d'alimentation/frein haute flexibilité de 10 m de long

120 W (1/6 HP) Brushless DC Motor

100 W (1/8 HP) Brushless DC Motor (15:1 Gear Ratio)