Moteurs et Variateurs de fréquences

Série 1S Servo Drive EtherCAT d'une capacité de 200 W

ACS880 600V 75HPld/60HPhd+BC

AZ Series EtherNet/IP™ Compatible Driver (Single-Phase / Three-Phase 200-240 VAC)

ABB DCS880 Drive - 500Vac , Ld 175HP/ Hd 125HP , H2 Frame

ACQ580-01-017A-2 ABB Drive ACQ, 5HP, 240V

Entraînement à courant alternatif de 11 A et à couple variable de 4 hp

AZ Series EtherNet/IP™ Compatible Driver (Single-Phase 100-120 VAC)

External keypad for PSE with 3m cable included

ACS580 600V 125HPld/100HPhd; Nema 12

Servomoteur rotatif de la série G5 d'une capacité de 400 W

ACS580 240V 15HPld/10HPhd; Nema 1

Série G5 Servo Drive analogique et à impulsions d'une capacité de 400 W

200 W (1/4 HP) Induction Gear Motor (50:1 Gear Ratio) (Three-Phase 200/220/230 VAC)

ACS580 600V 200HP 3 phases Nema 1

Micro Drive, 3-Phase, 2HP, 240VAC, 7A, E2 Frame, IP66, ACS256, ACS255 Series

LV AC general purpose wall-mounted drive, UL: Pld 250 Hp, 302 A, 500 V (ACS580-01-302A-4)

The softstarter PSR85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

LV AC general purpose wall-mounted drive, UL: Pld 5 Hp, 7.6 A, 500 V (ACS580-01-07A6-4)

Drive, AC, 40HP, 480V, 52.0A, CT, N1 480Vin 3PH 50HP 65.0A VT W/DB Trans 28.7"Hx8.0"Wx10.8"D ACS880

Série G5 Servo Drive analogique et à impulsions d'une capacité de 750 W