Measurement & Monitoring

Head-mounted transducer - FA MCR-HT-1TS-I-OLP

Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connection.

Current measuring transducers for measuring AC, DC, and distorted currents. Configuration via USB-C interface via the web server (without 24 V DC). Four current measuring ranges: 0 A ... 0.1 A to 0 A ... 12.5 A. Relay output, Standard configuration, Push-in connection

Temperature controller, 1/16 DIN (48x48 mm), 2 x 12 VDC pulse output, 3 AUX, RS-485, SSR failure detection/3-phase, 100-240 VAC

EMD-BL-C-10 - Monitoring relay for monitoring single-phase currents of 0 ... 5 A AC or 0 ... 10 A AC, overcurrent/undercurrent or window, 1 changeover contact, with screw connection

Communication unit for E5AK/EK/AN/EN, RS-485

Monitoring relay 22.5mm wide, Single phase over or under current 0.1 to 8A AC or DC, Two SPDT, 100-240 VAC

PACT MCR-V2-6015- 85-1250-5A-1 - Window-type current transformer, 1250 A AC primary current; 5 A AC secondary current; accuracy class 1; 15 VA rated power

option board (Slot B), not compatible with K3N models, Linear DC(0)1-5V or 0 to 10V Output and 12 VDC 80mA sensor power supply

Isolated DC I/O Module

CM-ESS.2S Voltage monitoring relay 2c/o, B-C=3-600VRMS, 220-240VAC

Isolated Digital Input Module

FA MCR-FD-TUI-UI-2REL-UP - Process indicator, multifunctional, in field housing for monitoring and displaying analog measurement data. Universal inputs enable the connection of current, voltage, RTDs, and TCs. 2 relay change-over contact outputs and 1 analog output..

100 to 240 V Alternating Current (AC) Supply Voltage Multi-Loop Process Controller

100 to 240 V Alternating Current (AC) Supply Voltage Multi-Loop Process Controller

100 to 240 V Alternating Current (AC) Supply Voltage 1/4 DIN Multi-Loop Ramp/Soak Process Controller

100 to 240 V Alternating Current (AC) Supply Voltage 1/4 DIN Multi-Loop Ramp/Soak Process Controller

100 to 240 V Alternating Current (AC) Supply Voltage 1/4 DIN Multi-Loop Ramp/Soak Process Controller

Temperature controller, 1/16 DIN (48x48 mm), 12 VDC pulse output, 3 AUX, 2 Event input, Heater burnout and SSR failure alarm, 24 VAC/DC

PACT MCR-V2-5012- 85-1000-5A-1 - Window-type current transformer, 1000 A AC primary current; 5 A AC secondary current; accuracy class 1; 10 VA rated power