Measurement & Monitoring

Digital setpoint encoders with manual and automatic ramp for defining current and voltage signals, 4-pos. display

Motor Condition Monitoring, AC, 3-phase, Induction motor, Current Analysis model, 24 VAC/VDC, Transistor control output, Push-in Plus, LCD display, Ethernet IP/Modbus, applicable in environment with inverters

Probe unit for Insulation Resistance Monitoring Device K7GE-MGM

External Powered IEPE Signal Conditioner

Temp. sensor,Smooth tube, Thermocouple K, 0-650 deg.,dia. 1.6, 150mm, ASTM316L, pre-wired, 2m

Temp. sensor, Crimp terminal type, Thermocouple K, 0-300 deg.,dia. 8, pre-wired, 2m

E52-P20C-N D=3.2, RTD L=20CM THERMO WELL

E52-P6DY 4M, RTD L=65MM R1/8 THREADED 4M

Output unit for E5A/E J/K, linear 4-20mA, 600 Ohm, 12-bit

E5CN accessory, quick link programming cable for the E5_N and CelciuX (EJ1) range, allows direct connection without requirement for communications card. USB connection to PC/Laptop and special connector for controller, Includes USB driver

Quick link front adapter for E5EC

Temp. controller, PRO; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms;1st out 12 VDC

Temperature controller, PRO; 1/4 DIN (96 x 96 mm); t/c & Pt100 & analog;4 alarms;1st out relay; 2nd out relay

Temp. controller, PRO; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms;1st out relay

Basic temperature controller, 1/16 DIN, 48 x 48 mm,Dial knob,On-Off Control,J-Thermocouple,0-200deg.,100 to 240V AC

Temp. controller, PRO, 1/16 DIN (48 x 48 mm), Plugin-type, 2 AUX, 1 x 0/4 to 20 mA curr. OUT, 100 to 240 VAC

Temp. controller, PRO, 1/16 DIN (48 x 48 mm), Plugin-type, 2 AUX, 1 x 12 VDC pulse OUT, 100 to 240 VAC

Temp. controller, PRO,1/16 DIN (48x48mm),Plugin-type,No AUX Rel.,SPDT Rel.,100-240 VAC

Temperature controller, 1/16 DIN (48x48 mm), 1 Relay output, 3 AUX, 2 Event input, Heater burnout and SSR failure alarm, 24 VAC/DC

Temperature controller, 1/16 DIN (48x48 mm), 1 Relay output, 3 AUX, RS-485, SSR failure detection/3-phase, 24 VAC/DC