Measurement & Monitoring

Fuse set, number: 10 Pcs., nominal current: 3.15 A, tripping characteristic: slow-blow (T)

IOA DAC-4DI/AI/EX - Digital-to-analog converter for VIP I/O-Marshalling base elements. For connection of four digital inputs and conversion to a single analog 4...20 mA signal. Saves three I/O channels.

IOA FEED-THRU-DO/NI/EX - Non-incendive, Ex ic impeding devices for VIP I/O marshalling base elements. For limiting current (60 mA or 80 mA) and voltage (26.4 V DC) on digital outputs. For example, to control solenoid valves in the Ex area (zone 2, CID2).

Monitoring relay 17.5mm wide, over or under temperature, 0-999 °C/F Thermocouple and PT100 input types, 1 x SPDT, 100-240 VAC

Motor Condition Monitoring, AC, 3-phase, Induction motor, Vibration & temperature model, 100 to 240 VAC, Transistor control output, Push-in Plus, LCD display, Ethernet IP

CT sensor for Current analysis model K6CM-CIM, 200A rated primary-side current

Insulation Resistance Monitoring Device for 3-phase & servo motors, pumps and heaters, 100 to 240 VAC, transistor control output, Push-in Plus, LCD display, RS-485/Modbus/RTU

Temp. controller, LITE, 1/16DIN (48 x 48mm), relay output, ON/OFF or PID Control, Pt100 RTD input, 1 Alarm Rel., 24 VAC/DC

Monitoring relay 22.5mm wide, Single phase over or under voltage 20 to 600V AC or DC, One SPDT,24VAC/DC

Basic temperature controller, 1/16 DIN, 48 x 48 mm,Dial knob,On-Off Control,J-Thermocouple,0-200deg.,100 to 240V AC

E52-P20C-N D=3.2, RTD L=20CM THERMO WELL

E52-P35C-N D=10, RTD L=35CM THERMO WELL

Temp. sensor,Smooth tube with R1/8 mounting, Pt100 class B, -50-250 deg.,dia. 4mm, 65mm,SUS 304, pre-wired, open cable ends, 2m

E52-P6DY 4M, RTD L=65MM R1/8 THREADED 4M

Event Input Option Unit

E5CN-H option board- event inputs and control output option (voltage pulse), **only compatible with new E5CN-H models**

Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,100-240 VAC

Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,EVT. I/P 4,Ht. Burnout SSR fail.,100-240 VAC

Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,EVT. I/P 6,Rem. SP I/P,Ht. Burnout SSR fail.,Transf. OUT,24VAC/DC

Temp. controller, PRO; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms; 1st out current (lin)