Industrial communication & Networking

SUBCON-PLUS-CAN/AX/M12 - D-SUB connector, 9-pos., socket, assignment: 2, 3, 5, 7, 9; two M12 cable entries (A-coded) under 180° (axial). Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.

RAD-PIG-RSMA/N-2 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: solid, attenuation: 0.9 / 1.3 / 2.0 dB at 0.9 / 2.4 / 5.8 GHz, connection: N (male) -> RSMA (male), cable length: 2 m (6.5 ft.)

SUBCON-PLUS-PROFIB/SC2 - D-SUB connector, 9-pos., male connector, 35° cable entry, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks

SUBCON-PLUS-CAN/SC2 - D-SUB plug, 9-pos. socket, two 35° cable entries less than to two terminal block rows, bus system: CAN, CANopen, SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2,3,7,9; screw connection terminal blocks

Ethernet patch cable, F/UTP, Cat.6A, LSZH (Blue), 1.5 m

Termination resistor - SAC-5P-M12FS PB TR

Tool - VS-IET-DSUB-SIGNAL-STD

CM-KBL-RS232/USB - Connecting cable D-9-SUB to USB, with adapter D-9-SUB to D-25-SUB.

FL CAT6 PATCH 2,0 - Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 8, 1 Gbps, CAT6, Ethernet

NBC-PP-G1PGY - DIN rail adapter, design: Headers with shielding, degree of protection: IP20, material: PC-GF10, connection method: Quick connection, without assembled modules

NBC-M12MSD/ 5,0-93E CMC - Bus system cable, Ethernet CAT5 (100 Mbps), 4-position, PUR halogen-free, water blue RAL 5021, shielded (Aluminum-coated foil, tinned copper braided shield), Plug straight M12, coding: D, on free cable end, cable length: 5 m

FL RJ45 PROTECT CAP - Dust protection caps for RJ45 socket

Ethernet patch cable, F/UTP, Cat.6A, LSZH (Yellow), 1.5 m

SUBCON-PLUS M1 - D-SUB connector, 9-pos., male connector, two 35° cable entries, bus system: Modbus, Modbus Plus, BITBUS, ARCNET, MULT/MININET (B&R), SYSTEM 2003 (B&R), P-NET, pin assignment: 1, 2, 3, 5, 6, 8 to two screw connection terminal blocks

RAD-TAPE-SV-19-3 - Vulcanizing sealing tape for external protection of adapters, cable connections, etc. against the effects of weather, roll length: 3 m

CompoNet/DeviceNet terminating resistor for standard flat cable

Ethernet patch cable, F/UTP, Cat.6A, LSZH (Blue), 0.5 m

GW PL HART4-R-BUS - Four-channel HART® expansion module, with screw connection, with 250 Ω internal input resistors

DeviceNet thin cable, straight M12 connectors (1 male, 1 female), 3 m

DeviceNet thin cable, straight M12 connectors (1 male, 1 female), 10 m