Industrial communication & Networking

Narrow Ethernet switch, sixteen RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

Industrial Ethernet Switch - FL SWITCH 2016

GW PL HART8-BUS - Eight-channel HART® expansion module, with screw connection

SUBCON 15/M-SH - D-SUB connector, 15-pos, male connector, one 35° cable entry, universal type for all systems, pin assignment: 1, 2, 3, ..., 14, 15 to screw connection terminal block

GW EIP/MODBUS 2E/2DB9 - The GW EIP/MODBUS... enables two-way communication between EtherNet/IP™ and Modbus protocols. Includes two RJ45 ports and two D-SUB 9 ports.

INJ 1000 - PoE injector, 30 W, two RJ45 jacks, 10/100/1000 Mbps, DIN rail mounting, IP20

Wireless module - RAD-900-IFS

Patch panels - FL-PP-RJ45-SCC

SUBCON 9/M-SH - D-SUB connector, 9-pos., male connector, one 35° cable entry, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block

SUBCON 9/F-SH - D-SUB plug, 9-pos. female connector, one 35° cable entry, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block

GW PL ETH/BASIC-BUS - Ethernet head station for modular HART gateway. Connect up to five GW PL HART…-BUS expansion modules to communicate with up to 40 HART devices. Supports Modbus TCP, HART IP, FDT/DTM and Arcom.

SUBCON 25/M-SH - D-SUB connector, 25-pos., male connector, one 35° cable entry, universal type for all systems, pin assignment: 1, 2, 3, ..., 24, 25 to screw connection terminal block

Industrial Ethernet Switch - FL SWITCH 1001T-4POE-GT

FL SWITCH 1008NT - Narrow Ethernet switch, wide temperature range, eight RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

Wireless module - FL WLAN 1101

Ethernet Cat.5 cable, PVC, RJ45 plug / RJ45 plug, 0.3 m

PP-RJ-SC - Patch panel, RJ45 jack on screw terminal blocks, CAT5e, 10/100/1000 Mbps, DIN rail adapter, IP20, shield contacting with strain relief

PSM-ME-RS232/RS485-P - Interface converter, for converting RS-232 (V.24) to RS-422 (V.11) and RS-485, with electrical isolation, 2 channels, rail-mountable

Industrial Ethernet Switch - FL SWITCH 3016

SUBCON-PLUS-M/AX 9 - D-SUB plug, 9-pos., pin, axial design with two cable entries, universal type for all systems, pin assignment: 1, 2, 3, 4, 5, 6, 7, 8, 9 to screw connection terminal block