Technical Specifications
| Dimensions | W 86 mm x D 120 mm x H 54 mm |
| Applicable Light Unit (output ratings) | 24 V/9 W |
| Number of channels | 1 channel |
| Lighting Method | Continuous lighting |
| Drive Method | Constant lighting |
| Intensity control method | PWM control |
| PWM frequency | 62.5 kHz |
| Input Voltage | 100 to 120 VAC |
| Frequency | 50/60 Hz |
| Power consumption | 27 VA typ. |
| Output Voltage | 24VDC |
| Output Current | 0.4 A |
| Inrush Current | 15 A (at 100 VAC) *From a cold start |
| Intensity control | Use of the intensity control knobs on the front panel (Coarse and Fine, 16 steps for each knob) |
| Error detection display | The Error indicator lamp on the front panel is lit when overcurrent is detected |
| Error detection output | External control connector pin 14(OCP): Open in normal condition, Open-collector ON when an overcurrent is detected |
| Over current protection | Operates at 107% min. Automatically reset, or manually reset by turning power OFF then ON again. |
| External control input | Insulation: Not insulated with a Control Unit Circuit: Pull-up of +5 V internally by use of resistor (4.7 kΩ), HS-CMOS input |
| Output connector | SMP-03V-BC (1: Output (+), 2: NC, 3: Output (-)) |
| External control connector | Manual ON/OFF control: Phone jack (Φ3.5) External control: 15-pin D-sub plug with M2.6 mm screws |
| Conformed standards | CE, UKCA、RoHS |
| Operating temperature and humidity | Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) |
| Cooling Method | Natural air cooling |
| Weight | 700 g |
| Material | Steel plate t1.0 |
| Accessories | Instruction Guide, Optional Cable Operation Guide |
Why Proax for CCS PD2-1024(A)?
Proax is the authorized distributor of CCS PD2-1024(A). Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PD21024A |
| Pack Size | 1 |
Recommended
This Digital Control Unit can be used for LED Light Units with an input voltage of 12 V within a total power consumption of 9.5 W. It operates on a 100 to 120 VAC input and measures 86 x 120 x 54 mm (width x depth x height).
