Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
2701154
Weight
0.235 kg
This product is Not Cancellable/Not Returnable
Series IB-IL

IB IL 24 DI 16-XC-PAC - Digital module

Inline, Digital input terminal, Digital inputs: 16, 24 V DC, connection technology: 3-conductor, Extreme conditions version, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields

  • 16 digital inputs
  • Connection of sensors in 2- and 3-conductor technology
  • Maximum permissible load current per sensor: 250 mA
  • Diagnostic and status indicators
  • Can be used under extreme ambient conditions
  • Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
  • Coated PCBs
Technical Specifications

Dimensions

Width48.8 mm
Height140.5 mm
Depth71.5 mm
Note on dimensionsHousing dimensions

Inline local bus

Number of interfaces2
Connection MethodInline data jumper
Transmission Speed500 kbps

Module

ID code (dec.)190
ID code (hex)BE
Length code (hex)01
Length code (dec)01
Process data channel16 bit
Input address area2 Byte
Output address area0 Byte
Register length16 bit
Required parameter data 1 Byte
Required configuration data 4 Byte

Digital:

Input nameDigital inputs
Description of the inputEN 61131-2 type 1
Number of Inputs16
Connection MethodSpring-cage connection
Connection technology3-conductor
Input Voltage24 V DC
Input voltage range "0" signal-3 V DC ... 5 V DC
Input voltage range "1" signal15 V DC ... 30 V DC
Nominal input voltage UIN24 V DC
Nominal input current at UINmin. 3 mA (at nominal voltage)
Sensor current per channelmax. 250 mA
Typical response time< 1 ms
Delay at signal change from 0 to 11 ms
Delay at signal change from 1 to 01 ms

Product properties

Product familyInline
Typemodular
Scope of deliveryincluding Inline connectors and marking fields
No. of channels16
Operating modeProcess data mode with one word
Special PropertiesExtreme conditions version

Electrical properties

Maximum power dissipation for nominal condition14.5 W
Protective circuitSurge protection; Protective elements in the power terminal or the bus coupler
Protective circuitReverse polarity protection; Protective elements in the power terminal or the bus coupler

Potentials: Communications power (UL)

Supply Voltage7.5 V DC
Current drawmax. 60 mA
Power consumptionmax. 0.45 W (at UL)

Potentials: Segment circuit supply (US)

Supply Voltage24 V DC (via voltage jumper)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 4 A
Current draw0 A

Electrical isolation/isolation of the voltage ranges

Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic)/functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameInline connector

Conductor connection

Connection MethodSpring-cage connection
Conductor cross section rigid0.08 mm² ... 1.5 mm²
Conductor cross section flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Inline connector

Connection MethodSpring-cage connection
Conductor cross section, rigid0.08 mm² ... 1.5 mm²
Conductor cross section, flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 55 °C (Standard)
Ambient Temperature (Operation)-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeDIN rail mounting
Accessories

Why Proax for Phoenix Contact IB IL 24 DI 16-XC-PAC?

Proax is an authorized distributor of Phoenix Contact IB IL 24 DI 16-XC-PAC and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Alternate NamesIBIL24DI16XCPAC
Pack Size1
Recommended

Available for order