
2316307
SKU
PHX2316307
MPN
FB-6SP
Weight
0.323 kg
Series FB
FB-6SP - Device coupler
Device coupler for Foundation Fieldbus and PROFIBUS PA with terminal connections for six spurs connected to fieldbus end devices.
- Terminator preinstalled
- Provides current limiting short-circuit protection per spur
- Ex nA [nL, Ex nA [ic] or FISCO ic spur connections
- Connect up to 6 Foundation Fieldbus or PROFIBUS PA field devices
- Single-sided plug configuration eliminates cable bend radius issues
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| MTTF | 1256 Years (25 degrees C) |
Supply
| Supply Voltage Range | 10.5 V DC ... 32 V DC (input on trunk line side) |
| Typical current consumption | 4.8 mA |
| Conductor cross section, flexible | 2.50 mm² ... 0.20 mm² |
| Conductor cross section, rigid | 2.50 mm² ... 0.20 mm² |
| Conductor cross section, flexible [AWG] | 24 ... 12 |
| Conductor cross section AWG | 24 ... 12 |
Safety data
| Input voltage Ui | 32 V (IIB (C/D)) |
| Input voltage Ui | 24 V (IIC (A/B)) |
| Input voltage Ui | 17.5 V (FISCO) |
| Inductance Li | 4 µH |
| Capacitance Ci | 0 µF |
| Max. output voltage Uo | Uin (spur) |
| Max. output current Io | 56 mA (spur) |
| Max. output power Po | 1.792 W |
| Current consumption | 4.8 mA (Maximum, no load) |
| Current consumption | 0.34 A (maximum trunk current) |
| IIC/IIB (spur): Max. external inductivity Lo / Max. external capacitance Co | / 80 nF |
| IIC/IIB (spur): Max. external inductivity Lo / Max. external capacitance Co | 0.26 mH |
Interfaces
| Signal | FOUNDATION Fieldbus |
| Signal | PROFIBUS |
Data: Foundation Fieldbus and PROFIBUS PA Segment
| Connection Method | Pluggable COMBICON screw connection for each spur |
| No. of channels | 6 |
| Termination resistor | 100 Ω, external removable plug included |
| Termination resistor | 100 Ω (external removable plug) |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section AWG max. | 12 |
| Conductor cross section AWG min. | 24 |
| Output nominal voltage | ≤ 32 V (each spur) |
| Output Current | 38 mA |
Dimensions
| Width | 148.2 mm |
| Height | 112.5 mm |
| Depth | 83.5 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -50 °C ... 90 °C |
| Ambient temperature (storage/transport) | -50 °C ... 90 °C |
| Altitude | 2000 m |
| Max. permissible relative humidity (operation) | < 95 % (non-condensing) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Shock | 30g, 11 ms |
| Vibration (Operation) | 5g, 10 Hz ... 150 Hz |
ATEX
| Identification | II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Identification | Ex nA [nL] IIC T4 Gc |
| Identification | Ex ic IIC T4 Gc, FISCO ic |
| Certificate | Sira 13ATEX4247X |
IECEx
| Identification | Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Identification | Ex nA [nL] IIC T4 Gc |
| Identification | Ex ic IIC T4 Gc, FISCO ic |
| Certificate | IECEx SIR 13.0089X |
CSA, USA/Canada
| Identification | Class I, Div. 2, Groups A, B, C, D |
| Identification | Ex nA [nL] IIC T4 Gc |
| Identification | Class I, Zone 2, AEx nA [nC] IIC T4 Gc |
UL, USA
| Identification | Class I, Zone 2 |
| Identification | AEx nA [ic] IIC T4, Entity/FISCO spurs |
| Identification | Ex nA [ic] IIC T4 Gc |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
UKCA Ex (UKEX)
| Identification | II 3(3)G Ex nA [ic] IIC T4 Gc, Entity/FISCO ic spurs |
| Identification | Ex nA [nL] IIC T4 Gc |
| Identification | Ex ic IIC T4 Gc, FISCO ic |
| Certificate | PxCAI22UKEx2316307X |
CCC
| Identification | Ex ec [ic] IIC T4 Gc |
| Identification | Ex ic IIC T4 Gc |
Standards
| Standards/regulations | EN 60079-0:2011, EN 60079-11:2012, EN 60079-15:2005, EN 60079-15:2010 |
| Standards/regulations | IEC 60079-0:2011, IEC 60079-11:2011, IEC 60079-15:2005, IEC 60079-15:2010 |
Standards/regulations
| Standards/regulations | Ring wave noise immunity in acc. with IEC 61000-4-12 |
| Standards/regulations | Dry heat in acc. with IEC 61131-2 |
| Standards/regulations | Damp heat in acc. with IEC 61131-2 |
| Standards/regulations | Shock and vibration in acc. with EN 61131-2 and EN 50178 |
| Standards/regulations | IEC 61158-2 |
Mounting
| Mounting Position | On horizontal and vertical DIN rail NS 35 in acc. with EN 60715 |
Accessories
Why Proax for Phoenix Contact 2316307?
Proax is an authorized distributor of Phoenix Contact 2316307 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |



















