CADEN
Cart

1622225

Official Distributor

By Phoenix Contact

SKU
PHX1622225
MPN
K-8E-OE/5,0-H00/M23F8-C5-S
Weight
1.974 kg
This product is Not Cancellable/Not Returnable
Series K

K-8E-OE/5,0-H00/M23F8-C5-S - Cable plug in molded plastic

Cable plug in molded plastic, series: KSH, M23-Socket, Straight, plastic molded, number of positions: 4+4+4+PE, type of locking: SPEEDCON, cable length: 5 m, shielded: yes, color of outer sheath: orange RAL 2003, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1244551

  • Transmission of signals, data, and power in just a single connector
  • CAT5 data interface for up to 100 Mbps
  • Our standard: robust halogen-free PUR cable
  • Simple and safe: 100% electrically tested and assembled ready for use
  • Designs with preassembled cables on one or both sides
  • Customer-specific assemblies and cable lengths can be supplied
Technical Specifications

Notes

Notes on operationObserve derating curve.

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• Only use tools recommended by Phoenix Contact
Safety note• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
Safety note• Operate the connector only when it is fully plugged in and interlocked.
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Connector specifications

TypeStraight, plastic molded
Housing MaterialPUR
Thread typeM23
Type of lockingSPEEDCON
Degree of ProtectionIP67, when in locked state
Degree of ProtectionIP68, when in locked state
No. of pos.4+4+4+PE
Direction of rotationStandard
Contact switching typeSocket
Insertion/withdrawal cycles100
Max. current30 A
Voltage630 V AC
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV

Cable specifications

Cable TypeHDSLC11Y-J
Transmission SpeedCAT5
Transmission Speed100 Mbps (Data interface)
Shieldedyes
Cable structure(5x 2.5 + 2x (2x 0.5) + (4x 0.34)C) C
External Cable Diameter15.50 mm ±0.5 mm
Outer sheath, materialPUR
Material wire insulationTPE
External sheath, colororange RAL 2003
Single wire, colorblack 1, black 2, black 3, black 4, green/yellow Power wires + PE
Single wire, colorbrown, violet, black 5, green Signal wires
Single wire, colorblue, yellow, white, orange Data wires
Nominal voltage, cable1000 V (300 V signal)
Test voltage4 kV (1.5 kV signal)
Rated current26 A (Power, in accordance with DIN VDE 0298-4 Tab. 11/5, at 15°C)
Rated current8 A (Signal, according to DIN VDE 0298-4 tab. 11/5)
Rated current3.6 A (Data, according to DIN VDE 0298-4 tab. 11/5)
Smallest bending radius, fixed installation73 mm
Smallest bending radius, movable installation148 mm
Max. bending cycles1000000
Traversing path6 m
Acceleration30 m/s²
Ambient temperature (operation) for fixed installation-40 °C ... 80 °C (fixed installation)
Ambient temperature (operation) for flexible installation-30 °C ... 60 °C (flexible installation)
UL AWM style20234 / 10492 (80°C/1000 V)
Special PropertiesFlexible cable conduit capable
Flame resistanceIEC 60332-1-2
Halogen-freein accordance with EN 50267-2-1
Resistance to OilEN 60811-2-1

Electrical properties

Nominal current IN26 A

Cable/line

Cable Length5 m
Accessories

Why Proax for Phoenix Contact 1622225?

Proax is an authorized distributor of Phoenix Contact 1622225 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended

CAD$444.15

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability