As in the figure, but with a black cable
Official DistributorSKU
MPN
SACCBP-FSD-4CON-PG9/4,0-936SCO
Weight
0.346 kg
This product is Not Cancellable/Not Returnable
Series SACCBP-FSD
SACCBP-FSD-4CON-PG9/4,0-936SCO - Bus system flush-type socket
Bus system flush-type socket, PROFINET, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 4.0 m bus cable, 2 x 2 x 0.34 mm2
Technical Specifications
Product properties
| Number of Positions | 4 |
| No. of cable outlets | 1 |
| Coding | D |
Insulation characteristics
| Overvoltage category | II |
| Degree of pollution | 3 |
Electrical properties
| Nominal voltage UN | 250 V |
| Nominal current IN | 4 A |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Contact Material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Brass, nickel-plated |
Connection 1
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | D |
Connection 2
| Head design | free cable end |
Cable/line
| Cable Length | 4 m |
PROFINET RADOX® railway application CAT5 reinforced [936]
| Shielded | yes |
| Cable weight | 81 g/m |
| Cable Type | PROFINET RADOX® railway application CAT5 reinforced |
| Cable type (abbreviation) | 936 |
| Signal type/category | PROFINET CAT5 (IEC 11801), 100 Mbps |
| Cable structure | 1x4xAWG22/7, SF/TQ |
| External Cable Diameter | 7.25 mm ±0.3 mm |
| Outer sheath, material | PE-X |
| External sheath, color | black RAL 9005 |
| Thickness, outer sheath | ≥ 0.80 mm |
| Conductor material | silver-plated Cu litz wires |
| Conductor structure signal line | 7x 0.25 mm |
| AWG Signal Line | 22 |
| Conductor Cross Section | 4x 0.34 mm² |
| Material wire insulation | PE-X |
| Wire diameter incl. insulation | 1.95 mm |
| Single wire, color | white-blue, orange-yellow |
| Overall twist | Star quad |
| Shielding | Plastic-coated aluminum foil, tinned copper braided shield |
| Optical shield covering | 100 % |
| Nominal voltage, cable | 300 V AC |
| Test voltage, cable | 2000 V AC (50 Hz, 5 minutes) |
| Cable resistance | ≤ 54.4 Ω/km |
| Coupling resistance | 200.00 mΩ/m (f ≤ 30 MHz) |
| Wave impedance | 100 Ω ±5 Ω (f = 100 MHz) |
| Working capacitance | ≤ 65 pF (Line-line) |
| Working capacitance | ≤ 100 pF (Line-shield) |
| Signal speed | 66 c |
| Minimum bending radius, fixed installation | 6 x D |
| Minimum bending radius, flexible installation | 10 x D |
| Remote crosstalk attenuation (FEXT) | 80 dB (with 1 MHz) |
| Remote crosstalk attenuation (FEXT) | 70 dB (at 4 МHz) |
| Remote crosstalk attenuation (FEXT) | 65 dB (at 10 MHz) |
| Remote crosstalk attenuation (FEXT) | 58 dB (at 31.5 МHz) |
| Remote crosstalk attenuation (FEXT) | 59 dB (at 62.5 МHz) |
| Remote crosstalk attenuation (FEXT) | 67 dB (at 100 MHz) |
| Near end crosstalk attenuation (NEXT) | 80 dB (with 1 MHz) |
| Near end crosstalk attenuation (NEXT) | 76 dB (at 4 МHz) |
| Near end crosstalk attenuation (NEXT) | 67 dB (at 10 MHz) |
| Near end crosstalk attenuation (NEXT) | 60 dB (at 31.5 МHz) |
| Near end crosstalk attenuation (NEXT) | 56 dB (at 62.5 МHz) |
| Near end crosstalk attenuation (NEXT) | 53 dB (at 100 MHz) |
| Return attenuation (RL) | 35 dB (at 4 МHz) |
| Return attenuation (RL) | 35 dB (at 10 MHz) |
| Return attenuation (RL) | 35 dB (at 31.5 МHz) |
| Return attenuation (RL) | 33 dB (at 62.5 МHz) |
| Return attenuation (RL) | 33 dB (at 100 MHz) |
| Shield attenuation | 40.00 dB (30 MHz ≤ f ≤ 100 MHz) |
| Fire protection in rail vehicles | BS 6853 (Category Ia, Ib, II) |
| Fire protection in rail vehicles | GM/RT 2130 (Category Ia, Ib, II) |
| Fire protection in rail vehicles | EN 45545 (Risk level HL1 - HL3) |
| Fire protection in rail vehicles | DIN 5510 (Fire protection level 1, 2, 3, 4) |
| Fire protection in rail vehicles | NF F16-101 (Category A1, A2, B) |
| Fire protection in rail vehicles | NF F16-101 (Class C/F0) |
| Fire protection in rail vehicles | NFPA 130 |
| Fire protection in rail vehicles | UNI CEI 11170 (Risk level LR1 - LR4) |
| Halogen-free | in accordance with EN 50267-2-1 |
| Resistance to Oil | according to IRM 902, 72 h at 100 °C |
| Concentration of fumes | BS 6853 D.8.7 |
| Concentration of fumes | EN 61034-2 |
| Concentration of fumes | UL 1685, 12 (FT4) |
| Fume toxicity | BS 6853 B.1 |
| Fume toxicity | EN 50305, 9.2 |
| Fume corrosiveness | EN 50267-2-2 |
| Flame resistance | EN 60332-1-2 |
| Flame resistance | EN 50266 |
| Flame resistance | EN 60332-3-25 |
| Flame resistance | NF C32-070, 2.1 |
| Flame resistance | NF C32-070, 2.2 |
| Flame resistance | UL 1685, 12 (FT4) |
| Flame resistance | in accordance with ISO 6722-1 5.22 (UN ECE-R 118.01) |
| Other resistance | Resistance to fuels (according to IRM 903, 168 h at 70 °C) |
| Ambient Temperature (Operation) | -40 °C ... 90 °C (Cable, flexible installation) |
| Ambient Temperature (Operation) | -50 °C ... 90 °C (cable, fixed installation) |
Mechanical data
| Insertion/withdrawal cycles | ≥ 100 |
Ambient conditions
| Degree of Protection | IP67 (When plugged in) |
| Degree of Protection | IP65 (When plugged in) |
| Degree of Protection | IP65/IP67 |
| Ambient Temperature (Operation) | -25 °C ... 70 °C (cable, fixed installation) |
| Ambient Temperature (Operation) | -25 °C ... 70 °C (Cable, flexible installation) |
| Ambient Temperature (Operation) | -5 °C ... 50 °C (Cable, flexible installation) |
Why Proax for Phoenix Contact 1445732?
Proax is an authorized distributor of Phoenix Contact 1445732 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 100 |
Recommended
SACCBP-FSD-4CON-PG9/0,5-931SCO - Device connector rear mounting, Ethernet CAT5 (100 Mbps), Ethernet, 4-position, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 0.5 m, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239673
SACCBP-FSD-4CON-PG9/0,5-933SCO - Device connector rear mounting, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 0.5 m, PROFINET PVC stranded CAT5, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239680- SACCBP-FSD-4CON-PG9/1,0-931SCO - Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, can be positioned, with 1.0 m bus cable, 2 x 2 x 0.2 mm2
SACCBP-FSD-4CON-PG9/1,0-933SCO - Device connector rear mounting, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 1 m, PROFINET PVC stranded CAT5, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239681- SACCBP-FSD-4CON-PG9/2,0-931SCO - Device connector rear mounting, Ethernet CAT5 (100 Mbps), Ethernet, 4-position, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 2 m, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239675
- SACCBP-FSD-4CON-PG9/2,0-933SCO - Device connector rear mounting, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 2 m, PROFINET PVC stranded CAT5, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239682
- Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, can be positioned, with 5.0 m bus cable, 2 x 2 x 0.2 mm2
- SACCBP-FSD-4CON-PG9/5,0-933SCO - Device connector rear mounting, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, PVC halogen-free, green RAL 6018, shielded, Socket, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 5 m, PROFINET PVC stranded CAT5, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239683
SACCBP-FSB-5CON-PG9/0,5-900SCO - Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m bus line- SACCBP-FSB-5CON-PG9/2,0-900SCO - Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 2.0 m bus line
Device connector rear mounting, PROFIBUS, 2-position, PUR halogen-free, red lilac RAL 4001, shielded, Socket, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Cable connection, cable length: 0.5 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239650- SACCBP-FSB-2CON-PG9/2,0-910SCO - Device connector rear mounting, PROFIBUS, 2-position, PUR halogen-free, red lilac RAL 4001, shielded, Socket, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Cable connection, cable length: 2 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239652
- SACCBP-FSB-2CON-PG9/5,0-910SCO - Device connector rear mounting, PROFIBUS, 2-position, PUR halogen-free, red lilac RAL 4001, shielded, Socket, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Cable connection, cable length: 5 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239653
SACCBP-FS-12CON-M16/1,0-PVCSCO - Device connector rear mounting, Universal, 12-position, PVC/PVC, black RAL 9005, shielded, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239765- SACCBP-FS-12CON-M16/2,0-PVCSCO - Device connector rear mounting, Universal, 12-position, PVC/PVC, black RAL 9005, shielded, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239766
Device connector rear mounting, Universal, 17-position, PVC/PVC, black RAL 9005, shielded, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239769- Device connector rear mounting, Universal, 17-position, PVC/PVC, black RAL 9005, shielded, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239770
SACCBP-FS-4CON-PG9/0,5-990SCO - Bus system flush-type socket, CC-Link, 4-pos., M12, SPEEDCON, shielded, rear/screw mounting with Pg9 thread, with 0.5 m bus cable- SACCBP-FS-4CON-PG9/1,0-990SCO - Bus system flush-type socket, CC-Link, 4-pos., M12, SPEEDCON, shielded, rear/screw mounting with Pg9 thread, with 1.0 m bus cable
- SACCBP-FS-4CON-PG9/2,0-990SCO - Bus system flush-type socket, CC-Link, 4-pos., M12, SPEEDCON, shielded, rear/screw mounting with Pg9 thread, with 2.0 m bus cable