Technical Specifications
| Dimensions | W 84 mm x D 82.6 mm x H 120 mm |
| Applicable Light Unit (output ratings) | 24 V/28 W |
| Number of channels | 3 channels |
| Lighting Method | Constant/Strobe lighting |
| Drive Method | Constant lighting |
| Intensity control method | PWM control, Lighting time control |
| PWM frequency | 125kHz |
| Frequency | 50/60 Hz |
| Output Voltage | 24VDC |
| Output Current | Total for 3 channels: 1.1 A |
| Inrush Current | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start |
| Intensity control | Use of the setting switch on the front panel (256 steps) |
| Error detection display | OCP is displayed on the digital display |
| Error detection output | Command sent when overcurrent output is detected. |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. |
| Output connector | SMP-03V-BC x 3 pieces |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: RJ-45 |
| Conformed standards | CE, RoHS |
| Operating temperature and humidity | Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) |
| Cooling Method | Natural air cooling |
| Weight | 600 g |
| Material | Aluminium, ABS |
| Accessories | 2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1 |
Why Proax for CCS PD3-3024-3-EI?
Proax is the authorized distributor of CCS PD3-3024-3-EI. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PD330243EI |
| Pack Size | 1 |
Recommended
_p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. This Control Unit operates on a 100 to 240 VAC input and measures 84 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. This Control Unit operates on a 100 to 240 VAC input and measures 84 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications.
This digital control unit can be used for LED light units Units with an input voltage of 24 V within a total power consumption of 28 W. It operates with 24 VDC input. It measures 84 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications, external trigger signal communication PNP input model._p-thumb.jpg)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. This Control Unit operates on a 100 to 240 VAC input and measures 84 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.