Official Distributor
SKU
Weight
0.024 kg
This product is Not Cancellable/Not Returnable
Series SACC-M
SACC-M12MSS-3PECON-PG 9-M - Power connector
Power connector, 4-position, Plug straight M12, coding: S, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm, for AC current up to 12 A/630 V, Contact 4 leading
- Safe use in the field, thanks to a high degree of protection
- Screw connection: proven connection technology for a large selection of different conductors
- High-performance: AC connectors for up to 12 A and 630 V AC
- Protection against incorrect connection using special S-coding
Technical Specifications
Notes
General | Strip 21 mm off the cable sheath, strip 6 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Conductor length with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Product properties
Application | Power supply |
Number of Positions | 4 |
No. of cable outlets | 1 |
Shielded | no |
Coding | S |
Cable outlet | straight |
Pg screw connection | Pg9 |
Insulation characteristics
Overvoltage category | III |
Degree of pollution | 3 |
Dimensions
Length | 60 mm |
Wrench size, union nut | 16 mm |
External dimensions
Outside diameter | 6 mm ... 8 mm |
Housing
Diameter housing | 20 mm |
Material specifications
Flammability rating according to UL 94 | V0 |
Seal material | NBR |
Material of grip body | PA |
Contact Material | CuZn |
Contact surface material | Au |
Contact carrier material | PA |
Material for screw connection | Zinc die-cast, nickel-plated |
Conductor connection
Connection Method | Screw connection |
Connection cross section | 0.75 mm² ... 1.5 mm² (with ferrule) |
Connection cross section | 0.75 mm² ... 2.5 mm² (solid) |
Connection cross section AWG | 18 ... 16 (with ferrule) |
Stripping length of the individual wire | 5 mm |
Tightening torque | 0.4 Nm (M12 knurl) |
Tightening torque | 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) |
Tightening torque | 0.4 Nm (Screw plug insert with sleeve housing as far it will go) |
Tightening torque | 0.2 Nm (Screw terminal blocks) |
Electrical properties
Rated surge voltage | 6 kV |
Contact resistance | ≤ 5 mΩ |
Insulation resistance | > 10 GΩ |
Nominal voltage UN | 630 V AC |
Nominal current IN | 12 A (when using 1.5 mm² conductors) |
Nominal current IN | 12 A (at 40 °C) |
Mechanical data
Insertion/withdrawal cycles | ≥ 100 |
Connection 1
Head design | Plug |
Head cable outlet | straight |
Head thread type | M12 |
Coding | S |
Cable/line
Stripping length of the individual wire | 5 mm |
Ambient conditions
Degree of Protection | IP67 |
Ambient Temperature (Operation) | -40 °C ... 85 °C (Plug / socket) |
M12
Standard designation | M12 connector |
Standards/specifications | IEC 61076-2-111 |
Why Proax for Phoenix Contact 1107268?
Proax is an authorized distributor of Phoenix Contact 1107268 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended