Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 1139804
AllConnectorsDevice connectors
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
SACC-E-M12MS-5PL-M20
Weight
0.03 kg
Series SACC-E-M

SACC-E-M12MS-5PL-M20 - Panel feed-through

Panel feed-through, Universal, 5-position, unshielded, Plug straight M12, coding: A, Front mounting, M20 x 1,5, Push-lock spring connection, knurl material: Brass, nickel-plated, Flat nut included

  • Easy and tool-free connection with Push-Lock connection
  • Easy assignment of individual conductors with color coding and numerical marking of contact holder levers
  • Conveniently connect stranded conductors, thanks to lever
  • Reliable and quick connection of electric cables

Documents

Technical Specifications

Notes

Assembly noteNOTE: Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Mounting

Mounting TypeFront mounting M20 x 1,5
Assembly noteThe wires can be connected both with ferrules and without ferrules

Product properties

Sensor TypeUniversal
Number of Positions5
No. of cable outlets1
Shieldedno
CodingA
Cable outletstraight

Insulation characteristics

Overvoltage categoryII
Degree of pollution3

Dimensions

Length21 mm
Hole diameter20.4 mm +0.1 mm

Housing

Diameter housing29 mm

Material specifications

MaterialPA 6 (Actuation lever)
Flammability rating according to UL 94V0
Contact MaterialCuSn
Contact surface materialNi/Au
Contact carrier materialPA 6.6
Material for screw connectionBrass, nickel-plated

Electrical properties

Rated surge voltage1.5 kV
Contact resistance≤ 5 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN48 V AC
Nominal voltage UN60 V DC
Nominal current IN4 A (2 A when using 0.14 mm² conductors)

Conductor connection

Connection MethodPush-lock spring connection
Contact connection typePin
Connection cross section0.14 mm² ... 0.75 mm² (without ferrule)
Connection cross section0.08 mm² ... 0.5 mm² (with ferrule)
Connection cross section0.14 mm² ... 0.75 mm² (solid)
Connection cross section AWG26 ... 18 (without ferrule)
Connection cross section AWG28 ... 20 (with ferrule)
Stripping length of the individual wire7 mm
Tightening torque2 Nm (Installation-side)

Mechanical data

Insertion/withdrawal cycles≥ 100

Connection 1

Head designPlug
Head cable outletstraight
Head thread typeM12
CodingA

Cable/line

Signal type/categoryUniversal
Stripping length of the individual wire7 mm

Ambient conditions

Degree of ProtectionIP67
Ambient Temperature (Operation)-40 °C ... 85 °C (Plug / socket)

M12

Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Why Proax for Phoenix Contact 1139804?

Proax is an authorized distributor of Phoenix Contact 1139804 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact1139802
    1139802
    SACC-E-M12MS-4PL-M20 - Panel feed-through, Universal, 4-position, unshielded, Plug straight M12, coding: A, Front mounting, M20 x 1,5, Push-lock spring connection, knurl material: Brass, nickel-plated, Flat nut included
  • Phoenix Contact1411579
    1411579
    SACC-E-M12MS-5P-M16XL/0,5 - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1411577
    1411577
    SACC-E-M12MS-4P-M16XL/0,5 - Device connector front mounting, Universal, 4-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1436437
    1436437
    SACC-E-M12MS-5CON-M12 PSCUP - Sensor/actuator flush-type connector, male connector, 5-pos., M12, A-coded, front/screw mounting with M12 thread, with solder cups, plastic version
  • Phoenix Contact1436398
    1436398
    SACC-E-M12MS-5CON-M16 PSCUP - Sensor/actuator flush-type connector, male, 5-pos., M12, A-coded, front/screw mounting with M16 thread, with solder cups, plastic version
  • Phoenix Contact1501595
    1501595
    SACC-E-M12MS-5CON-M16/0,5 - Sensor/Actuator flush-type plug, 5-pos., M12, A-coded, front/screw mounting with M16 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm2
  • Phoenix Contact1436411
    1436411
    SACC-E-M12MS-5CON-M16/0,5 P - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1458868
    1458868
    SACC-E-M12MS-5CON-M16/0,5 VA - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1575550
    1575550
    SACC-E-M12MS-5CON-M16/1,0 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 1 m, cable gland M16 x 1.5, 0.25 mm2, TPE litz wire
  • Phoenix Contact1408446
    1408446
    Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238773
  • Phoenix Contact1452068
    1452068
    SACC-E-M12MS-5CON-M20/0,5 VA - Device connector front mounting, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1554568
    1554568
    SACC-E-M12MS-5CON-PG 9/0,5 VA - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1563973
    1563973
    "SACC-E-M12MS-5CON-PG9/0,115TIN"
  • Phoenix Contact1671111
    1671111
    SACC-E-M12MS-5CON-PG9/0,5 - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1525872
    1525872
    SACC-E-M12MS-5CON-SQ26/ 0,5 - Sensor/Actuator flush-type plug, 5-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 5 x 0.34 mm2
  • Phoenix Contact1501634
    1501634
    SACC-E-M12MS-4CON-M16/0,5 - Sensor/Actuator flush-type plug, 4-pos., M12, A-coded, front/screw mounting with M16 thread, with 0.5 m TPE litz wire, 4 x 0.34 mm2
  • Phoenix Contact1405233
    1405233
    SACC-E-M12MS-4CON-M16/0,5 VA - Device connector front mounting, Universal, 4-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1555473
    1555473
    SACC-E-M12MS-4CON-M20/0,15 VA - Device connector front mounting, Universal, 4-position, Pin, straight, M12, coding: A, Front mounting, M20 x 1,5, Individual wires, 0.34 mm2, TPE litz wire
  • Phoenix Contact1408451
    1408451
    SACC-E-M12MS-4CON-M20/0,5 - Device connector front mounting, Universal, 4-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238774
  • Phoenix Contact1408415
    1408415
    SACC-E-M12MS-4CON-M20/0,5 VA - Device connector front mounting, Universal, 4-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability