1138965
Official DistributorSKU
PHX1138965
MPN
CHARX SEC-3150
Weight
0.268 kg
Series CHARX-SEC
CHARX SEC-3150 - AC charging controller
CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO 15118, operating mode: Stand-Alone, Client, Server, interface: Ethernet (2x), Cellular communication (4G/2G), CHARX control modular system bus, MICRO-USB type C, communication protocol: OCPP 1.6J, Modbus/TCP, MQTT, Connectable peripheral devices: Energy meter, RFID, DC residual current detection, DIN rail mounting
Documents
Technical Specifications
Product properties
| Product family | CHARX control modular |
| Design | with Embedded Linux system |
| Operating mode | Stand-Alone |
| Operating mode | Client |
| Operating mode | Server |
| Charging standard | IEC 61851-1 |
| Charging standard | ISO/IEC 15118 |
| Charging mode | Mode 3, Case B + C |
Insulation characteristics
| Overvoltage category | III |
IEC 61131 runtime system
| Data storage system | 8 GByte (eMMC) |
Supply
| Supply Voltage | 12 V DC ±5 % |
| Supply Voltage Range | 11.4 V DC ... 12.6 V DC |
| Max. current consumption | 2 A (Stand-alone operation) |
Digital
| Number of digital inputs | 4 |
| Description of the input | Digital input |
| Nominal input voltage UN | 12 V |
| Input voltage range U1 | 0 V ... 3 V (Off) |
| Input voltage range U2 | 9 V ... 15 V (On) |
| Output name | Digital output |
| Number outputs | 4 |
| Maximum output voltage | ≤ 12 V (Low-side operation) |
| Maximum output current | max. 600 mA |
Conductor connection
| Connection Method | pluggable |
| Connection Method | Push-in technology |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
Interfaces
| Interface | Ethernet (2x) |
| Interface | Cellular communication (4G/2G) |
| Interface | CHARX control modular system bus |
| Interface | USB-C |
Wireless
| Interface description | GSM / GPRS / EDGE / LTE (FDD) |
| Note | You will find a suitable antenna in the accessories are for this item |
| Frequency | 700 MHz (LTE B28, hardware revision 1.4 or later) |
| Frequency | 800 MHz (LTE B20) |
| Frequency | 900 MHz (LTE B8) |
| Frequency | 1800 MHz (LTE B3) |
| Frequency | 2100 MHz (LTE B1, hardware revision 1.4 or later) |
| Frequency | 2600 MHz (LTE B7, hardware revision 1.4 or later) |
| Frequency | 900 MHz (GSM/GPRS/EDGE ) |
| Frequency | 1800 MHz (GSM/GPRS/EDGE ) |
| Antenna | 50 Ω impedance SMA antenna socket |
| SIM Interface | Micro SIM (3FF) |
| LTE | CAT1 |
| Protocols Supported | OCPP 1.6J |
Ethernet
| Interface | Ethernet |
| Connection Method | RJ45 jack |
| Number of interfaces | 2 |
| Number of supported devices | 2 |
| Serial transmission speed | 10/100 Mbps |
| Transmission length | 100 m |
| Protocols Supported | OCPP 1.6J |
| Protocols Supported | Modbus/TCP |
| Protocols Supported | MQTT |
| Protocols Supported | HTTP |
| Protocols Supported | HTTPS |
Others
| Interface | Configuration and diagnostics |
| Connection Method | USB type C |
| Number of interfaces | 1 |
| Protocols Supported | RNDIS |
| Interface | Energy meter |
| Bus system | RS-485 |
| Transmission speed range | 9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected energy meter) |
| Interface | RFID readers |
| Bus system | RS-485 |
| Transmission speed range | 9.6 kbps ... 115.2 kbps (Automatic setting in accordance with the selected RFID reader) |
| Interface | CHARX control modular system bus |
| Connection Method | DIN rail bus connectors |
| Number of interfaces | 1 |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 65 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above mean sea level) |
| Air pressure (storage/transport) | 58 kPa ... 106 kPa (up to 4500 m above mean sea level) |
Conformity/Approvals
| Conformance | CE-compliant |
Standards
| Standards/regulations | IEC 61851-1 |
| Standards/regulations | ISO 15118 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly note | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 1138965?
Proax is an authorized distributor of Phoenix Contact 1138965 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO 15118, operating mode: Stand-Alone, Client, Server, interface: Ethernet (2x), CHARX control modular system bus, MICRO-USB type C, communication protocol: OCPP 1.6J, Modbus/TCP, MQTT, Connectable peripheral devices: Energy meter, RFID, DC residual current detection, DIN rail mounting
CHARX SEC-1000 - CHARX control modular, AC charging controller, IEC 61851-1, operating mode: Stand-Alone, Client, interface: CHARX control modular system bus, Connectable peripheral devices: Energy meter, RFID, DC residual current detection, DIN rail mounting
CHARX T2HBI12-DC250-5,0M2 - CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, 250 A / 1000 V (DC), Single wires, length: 5 m, locking actuator: 12 V, 4-pos., front and rear mounting
CHARX connect universal, DC CCS Typ 2, Vehicle charging inlet, up to 500 A in Boost mode, 200 A Permanent, 1000 V DC, Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, for charging with direct current (DC), IEC 62196-2, IEC 62196-3, A protective cap is supplied as standard for the DC contacts.- CHARX connect universal, AC/DC CCS Typ 2, Vehicle charging inlet, up to 250 A in Boost mode, 125 A Permanent, 1000 V DC, 32 A , 480 V AC, Single wires, length: 5 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, for charging with alternating current (AC) and with direct current (DC), IEC 62196-2, IEC 62196-3, A protective cap is supplied as standard for the DC and AC contacts.
- CHARX connect universal, AC/DC CCS Typ 2, Vehicle charging inlet, up to 500 A in Boost mode, 200 A Permanent, 1000 V DC, 32 A , 480 V AC, Single wires, length: 3 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, for charging with alternating current (AC) and with direct current (DC), IEC 62196-2, IEC 62196-3, A protective cap is supplied as standard for the DC and AC contacts.
- CHARX connect universal, AC/DC CCS Typ 2, Vehicle charging inlet, up to 250 A in Boost mode, 125 A Permanent, 1000 V DC, 32 A , 250 V AC, Single wires, length: 5 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, for charging with alternating current (AC) and with direct current (DC), IEC 62196-2, IEC 62196-3, A protective cap is supplied as standard for the DC and AC contacts.