Official DistributorSKU
Series Tuning Free Servo Motors
200 W (1/4 HP) Servo Motor, Rated Torque = 90 oz-in (0.637 N·m)
The NX Series tuning free servo motors offer high performance and high accuracy control. Each high performance servo system features 4 control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning. Four Control Modes:- Position
- Speed
- Torque
- Tension
Technical Specifications
| Rated Output Power | 200 W (1/4 HP) |
| Motor Frame Size | 2.36 in. |
| Rated Torque | 90 oz-in |
| Max Speed (rpm) | 5500 |
| Rated Speed (rpm) | 3000 |
| Max Instantaneous Torque | 270 oz-in |
| Rotor Inertia | 1.01 oz-in² |
| Permissible Load Inertia | 89 oz-in² |
| Resolution (P/R) | 100 to 100000 (Factory setting 1000) |
| Detector | Absolute Encoder1 rotation 20 bits, multiple rotations 16 bits |
| Gear/Shaft Type | Round Shaft (No Gear) |
| Electromagnetic Brake | Equipped |
| Permissible Overhung Load | 0 in. from Shaft End = 51 lb |
| Permissible Thrust Load | 22 lb |
| Thermal Class | 130 (B) |
| Insulation Resistance (Motor) | 100 MΩ min. when measured with a 500 VDC megger between the following locations:Case - Motor WindingsCase - Electromagnetic Brake Windings |
| Dielectric Voltage (Motor) | No abnormality is judged with the following application for 1 minute:Case - Motor Windings 1.5 kVAC 50 Hz or 60 HzCase - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz |
| Ambient Temperature (Motor) | 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) |
| Ambient Humidity | 85% max. (non-condensing) |
| Operating Atmosphere | No corrosive gases. Must not be exposed to oil or other liquids. |
| Degree of Protection | IP65 (excluding installation surface and connector locations.) |
| Shaft Runout | 0.05 T.I.R. (mm) |
| Concentricity | 0.075 T.I.R. (mm) |
| Perpendicularity | 0.075 T.I.R. (mm) |
| Safety Standards | CEUL/CSA |
| RoHS Compliant | The products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Brake Type | Power Off Activated Type |
| Brake Power Supply | 24 VDC ±10% |
| Power consumption | 7.2 W |
| Excitation Current | 0.3 A |
| Static Friction Torque | 90 oz-in |
Why Proax for Oriental Motor NXM620M?
Proax is the authorized distributor of Oriental Motor NXM620M. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
