Official DistributorSKU
Compact Linear Actuator and Driver
High-precision integrated ball screw incorporated into a stepper motor for continuous high-positioning linear motion. Reduces the number of components such as couplings and secondary external guides to make equipment more compact, quicker to install with less parts to order. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.- Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
- Low Vibration
- High Positioning Accuracy
- Reliable Design and Structure
Technical Specifications
| Motor Type | 5-Phase |
| Actuator Frame Size | 1.1 in. |
| Drive Method | Ground Ball Screw |
| Repetitive Positioning Accuracy | ±0.0001 in. |
| Lost Motion | 0.00079 in. |
| Power Supply | 24 VDC |
| Current | 0.7 A |
| Type | High-Resolution |
| Guide | Not Equipped |
| Electromagnetic Brake | Not Equipped |
| Adjusting Knob | Equipped |
| Lead | 0.04 in. |
| Stroke | 1.18 in. |
| Actuator Connection Type | Connector |
| Lead Wires | 5 |
| Max. Vertical Transportable Mass | 6.60 lb |
| Max. speed | 0.94 in/s |
| Max. Thrust Force | 6.70 lb |
| Max. Holding Force | 6.70 lb |
| Resolution | 0.000039 in. |
| Components | DRLM28-03B1MN-K [Actuator]LRD507-KD [Driver] |
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | CE |
| Insulation resistance | [Actuator] 100 MΩ or more when 500 VDC megger is applied between the motor windings and case.[Driver] The measured value is 100 MΩ or more when a 500 VDC megger is applied between the FG Terminal - Power Input Terminal. |
| Dielectric strength | [Actuator] Sufficient to withstand 0.5 kV at 50 Hz or 60 Hz applied between the motor windings and case for 1 minute. |
| Ambient temperature range | 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | 85% or less (noncondensing) |
| Number of Positioning Data Sets | 63 Points |
| Positioning Operation | Independent, Linked, Linked 2, Sequential, Direct |
| Other Operations | Jog Operation, Return-to-Home Operation, Continuous Operation, Test Operation |
| Protocol | Modbus Protocol (Modbus RTU mode) |
| Electrical Characteristics | EIA-485 basedUse twisted-pair wire (TIA/EIA-568B CAT5e or greater recommended), and set a max. total length of 50 m (164 ft.) |
| Transmission/Reception Mode | Half-duplex communication |
| Baud Rate | 9600 bps/19200 bps/57600 bps/115200 bps |
| Physical Layer | Start-stop synchronization mode (Data: 8-bits, stop bit: 1-bit/2-bit, parity: none/even numbers/odd numbers) |
| Connection Type | Up to 31 units can be connected to one programmable controller (master equipment). |
Why Proax for Oriental Motor DRL28-03B1MN-KD?
Proax is the authorized distributor of Oriental Motor DRL28-03B1MN-KD. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | DRL2803B1MNKD |
| Pack Size | 1 |
Recommended
