The figure shows the standard item
Official DistributorSKU
MPN
IB IL 24 SEG/F-XC-PAC
Weight
0.087 kg
Series IB-IL
IB IL 24 SEG/F-XC-PAC - Segmentation module
Inline segment terminal, version for extreme conditions, complete with accessories (connector and labeling field), 24 V DC, with fuse
- Automatic creation of a segment circuit in the main circuit
- Segment circuit protected by an internal fuse
- Diagnostic and status indicators
- Can be used under extreme ambient conditions
- Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
- Coated PCBs
Technical Specifications
Dimensions
| Width | 12.2 mm |
| Height | 119.8 mm |
| Depth | 71.5 mm |
Inline local bus
| Number of interfaces | 2 |
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds) |
Module
| ID code (dec.) | none |
| ID code (hex) | none |
| Register length | 0 bit |
| Required parameter data | 0 Byte |
| Required configuration data | 0 Byte |
Product properties
| Product family | Inline |
| Type | modular |
Insulation characteristics
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Electrical properties
| Test section | 5 V supply, incoming remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. |
| Test section | 5 V supply, outgoing remote bus/7.5 V supply (bus logics) 500 V AC 50 Hz 1 min. |
| Test section | 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Test section | 24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min. |
| Protective circuit | Overload protection, short-circuit protection in the segment circuit; Fuse 5 x 20 with 6.3 A, slow-blowFuses with other values can also be used. The maximum fuse value is 8 A.For fuses with a value greater than 2 A, only slow-blow fuses may be used. |
| Protective circuit | Surge protection; Protective elements in the power terminal or the bus coupler |
| Protective circuit | Reverse polarity protection; Protective elements in the power terminal or the bus coupler |
| Fuse | SI 5 x 20 6, 300 AT (in scope of delivery) |
Supply
| Communications power UL | 7.5 V DC |
Potentials: Main circuit supply (UM)
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 8 A (nominal value) |
| Current draw | typ. 6 A (The terminal is supplied with a 6.3 A slow-blow fuse. In the event of an increased total current in the potential jumpers UM and US, the circuit must be protected through the use of higher rated fuses (max. 8 A, slow-blow).) |
Potentials: Segment circuit supply (US)
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Connection technology
| Connection name | Inline connector |
Conductor connection
| Connection Method | Spring-cage connection |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Inline connector
| Connection Method | Spring-cage connection |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
| Stripping length | 8 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 55 °C (Standard) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (according to DIN EN 61131-2) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| GRP_Temperature class | T2 (-40 °C ... 55 °C, EN 50155) |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
Why Proax for Phoenix Contact 2701163?
Proax is an authorized distributor of Phoenix Contact 2701163 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2861373 - Inline segment terminal, complete with accessories (connector and labeling field), 24 V DC, with fuse- 2861904 - Inline segment terminal block, complete with accessories (connector and labeling field), 24 V DC, with fuse and diagnostics
2861182 - Inline segment terminal block, without accessories, 24 V DC, transmission speed 2 Mbaud, electronic fusing- 2863847 - Inline segment terminal, complete with accessories (connector and labeling field), 24 V DC, transmission speed 2 Mbaud, electronic fuse
- 2861409 - Inline segment terminal block, complete with accessories (connector and labeling field), 24 V DC, electronic fuse
2861344 - Inline segment terminal block, complete with accessories (connector and labeling field), 24 V DC, without fuse
2985657 - Safe, decentral, digital input module, IP20 degree of protection for the Inline product range.This module has four safe digital inputs with two-channel occupancy or eight safe digital inputs with single-channel occupancy.
2985754 - Safe, decentral, digital output module, IP20 degree of protection for the Inline product range. This module has four safe digital outputs with two-channel occupancy or eight safe digital outputs with single-channel occupancy.
2861564 - Inline safety terminal, complete with accessories (connector and labeling field), 2 N/O contacts, 24 V DC
2861360 - Inline thermistor terminal, complete with accessories (connector and marking field), 2-conductor connection technology
