Technical Specifications
| Dimensions | W 110 mm x D 170 mm x H 90 mm |
| Applicable Light Unit (output ratings) | 12 V/27 W (total for 2 channels) |
| Number of channels | 2 channels |
| Lighting Method | Strobe lighting |
| Drive Method | Constant lighting |
| Intensity control method | Lighting time control |
| Frequency | 50/60 Hz |
| Output Voltage | 18V DC |
| Output Current | 8.1 A max. |
| Inrush Current | 26 A (at 100 VAC)/63 A (at 240 VAC) *From a cold start |
| External control input | Parallel 4 bits/channel, 5V-CMOS level input, pull-up resistance of 4.7Ω Low level: 1.13V max, High level: 3.15V min. |
| Lighting pulse width | 10μs to 990μs: Set with the light pulse width setting switch and the intensity control knob on the front panel. Lighting time = Pulse Width x Control Light pulse width: 0 to 99 x 10μs (external mode only) Control: 10 to 100% (in 10% steps) |
| Lighting delay | 15μs max. |
| Output connector | SMP-02V-BC (1: Output(+), 2: Output(-)) x 2 pieces |
| External control connector | External control: 25-pin D-sub plug with M2.6 mm screws x 1 piece |
| Trigger | Trigger mode: Int/Ext (Both channels are changed simultaneously.) Int (Internal trigger): 1.42 ms cycle, Lighting time of 10 to 100μs (Used for operation confirmation) Ext (External trigger): Photo-coupler input, Current of 5 mA max., Pulse width of 20μs min., Wave rise/fall of 10μs max. (Ambiguous wave pattern is not allowed.), Operable trigger input cycle of 14.2 ms min. (When the pulse width setting switch is set to 99.) |
| Trigger Output | Trigger input ON: High pulse output with 5V CMOS signal 8: Trig1 OUT, 9: Trig2 OUT, 10: GND |
| Conformed standards | CE, UKCA、RoHS |
| Operating temperature and humidity | Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) |
| Storage temperature and humidity | Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) |
| Cooling Method | Natural air cooling |
| Weight | 1200 g |
| Material | Steel plate t1.0 |
| Accessories | 2m long 3-prong AC power cord with ground terminal x 1, External connector x 1 Instruction Guide x 1 |
Why Proax for CCS PTU2-3012(A)?
Proax is the authorized distributor of CCS PTU2-3012(A). Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PTU23012A |
| Pack Size | 1 |
Recommended
This 2-channel Strobe Control Unit can be connected to 24V LED Light Units within a total power consumption of 27 W. It operates on a 100 to 240 VAC input and measures 110 x 170 x 90 mm (width x depth x height).
