2979472
Official DistributorSKU
PHX2979472
MPN
UMK-32 RM/MR-G24/1/PLC
Weight
0.459 kg
Series UMK
UMK-32 RM/MR-G24/1/PLC - Active module
VARIOFACE output module, with 32 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)
- Narrow design width of just 55 mm (8 channels) or 202 mm (32 channels)
- Universal applications from 1 mA to 3 A continuous current thanks to 2-layer double contact with hard gold plating
- LED status indicator per signal path and supply voltage
- Freewheeling and polarity protection diode for each signal path
- Plug-in miniature relays each with an N/O contact
Technical Specifications
Product properties
| No. of channels | 32 |
| Operating mode | 100% operating factor |
| Mechanical service life | 2x 10⁷ cycles |
| Compatible components | Miniature relay, REL-MR-G 24/1 |
| With components | yes |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Rated Insulation Voltage | 300 V AC |
| Rated surge voltage | 4 kV (Basic insulation) |
Supported controller SIEMENS S7-1500
| Suitable I/O card | 6ES7521-1BL00-0AB0 |
| Suitable I/O card | 6ES7522-1BL00-0AB0 |
| Suitable I/O card | 6ES7522-1BL01-0AB0 |
Supported controller SIEMENS S7-400
| Suitable I/O card | 6ES7422-1BL00-0AA0 |
| Suitable I/O card | 6ES7422-7BL00-0AB0 |
Supported controller ALLEN-BRADLEY PLC 5
| Suitable I/O card | 1771 OBN |
Supported controller EMERSON DeltaV
| Suitable I/O card | VE4002S1T2B6 |
Supported controller GE-FANUC RX3i
| Suitable I/O card | IC694MDL754 |
Supported controller HONEYWELL Experion PKS C200
| Suitable I/O card | TC-ODD 321 |
Supported controller MITSUBISHI MELSEC L
| Suitable I/O card | LY41PT1P |
| Suitable I/O card | LY42PT1P |
Supported controller MITSUBISHI MELSEC Q
| Suitable I/O card | QY81P |
| Suitable I/O card | QY82P |
Supported controller SCHNEIDER ELECTRIC Modicon TSX QUANTUM
| Suitable I/O card | DDO 353 |
Supported controller SIEMENS S7-300 / ET 200 M
| Suitable I/O card | 6ES7322-1BL00-0AA0 |
Supported controller SIEMENS ET 200SP HA
| Suitable terminal block | 6DL1193-6TP00-0BH1 |
| Suitable terminal block | 6DL1193-6TP00-0DH1 |
| Suitable terminal block | 6DL1193-6TP00-0BM1 |
| Suitable terminal block | 6DL1193-6TP00-0DM1 |
| Suitable I/O module | 6DL1131-6BL00-0PH1 (Terminal Block H1/M1) |
| Suitable I/O module | 6DL1132-6BL00-0PH1 (Terminal Block H1/M1) |
Input data
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.8 ... 1.1 |
| Input voltage range | 19.2 V DC ... 26.4 V DC |
| Typical input current at UN | 6.5 mA |
| Typical response time | 5 ms |
| Typical release time | 15 ms |
| Protective circuit | Freewheeling diode; Freewheeling diode |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Operating voltage display | Green LED |
| Status display/channel | Yellow LED |
Output data
| Compatible components | Miniature relay, REL-MR-G 24/1 |
Switching
| Contact switching type | 1 N/O contact |
| Type of switch contact | Double contact |
| Contact Material | AgNi, 5 µm hard gold-plated |
| Maximum Switching Voltage | 250 V AC |
| Maximum Switching Voltage | 125 V DC |
| Minimum Switching Voltage | 5 V |
| Limiting Continuous Current | 3 A |
| Maximum Inrush Current | 5 A |
| Min. switching current | 1 mA |
| Interrupting rating (ohmic load) max. | 72 W (24 V DC) |
| Interrupting rating (ohmic load) max. | 60 W (48 V DC) |
| Interrupting rating (ohmic load) max. | 50 W (60 V DC) |
| Interrupting rating (ohmic load) max. | 50 W (110 V DC) |
| Interrupting rating (ohmic load) max. | 750 VA (250 V AC) |
| Error detection (line break / short-circuit) | no |
Controller level
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 1 |
| Number of Positions | 50 |
| Pitch | 2.54 mm |
Field level
| Connection Method | Screw connection |
| Stripping length | 6 mm |
| Screw thread | M3 |
| Number of Connections | 64 |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 26 ... 16 |
Supply
| Connection Method | Screw connection |
| Stripping length | 6 mm |
| Screw thread | M3 |
| Number of Connections | 4 |
| Number of Positions | 2 |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 26 ... 14 |
Signaling
| Status display present | Yes |
Dimensions
| Width | 202.5 mm |
| Height | 77 mm |
| Depth | 52.5 mm |
Material specifications
| Color | gray (RAL 7042) |
Ambient conditions
| Degree of Protection | IP00 |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
| Standards/regulations | EN 61010-2-201 |
| Standards/regulations | IEC 60664 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting Position | any |
Notes
| Notes on operation | Observe the maximum switching capacity of the relays used |
| Notes on operation | Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch. |
| Notes on operation | The outputs are not suitable for switching different line conductors. The sum of the switching voltages used for adjacent outputs must not exceed the rated insulation voltage value |
| Notes on operation | The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates). |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Accessories
FLK 50/EZ-DR/ 125/KONFEK - Round cable set; connection 1: IDC/FLK socket strip (1x 50-position); connection 2: IDC/FLK socket strip (1x 50-position); cable length: 1.25 m- FLK 50/EZ-DR/1200/KONFEK - Round cable set; connection 1: IDC/FLK socket strip (1x 50-position); connection 2: IDC/FLK socket strip (1x 50-position); cable length: 12 m
Why Proax for Phoenix Contact 2979472?
Proax is an authorized distributor of Phoenix Contact 2979472 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
UMK-32 RM/MR-G24/1/YCS - 32-channel output relay module (one N/O contact, 250 V AC/3 A) with a screw connection. The module is controlled through a 50-pos. system connector and is suitable for the Yokogawa ADV 551 and ADV 561 cards.
UMK-32 MDSTB/MKKDS3/R - VARIOFACE module, with screw connection and COMBICON connector, coded, for mounting on NS 35/7.5 or NS 32, no. of positions 32