Official DistributorSKU
MPN
EMG 22-DIO 4M-1N5408
Weight
0.046 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-DIO 4M-1N5408 - Diode block
Diode module, with four diodes, common anode, diode type 1N 5408
- Spark-suppression diodes for limiting surge voltages of inductive loads
- Electrical decoupling of messages in fault reporting systems
Technical Specifications
Insulation characteristics
| Pollution degree | 2 |
Diode
| Description of the input | 4 diodes, common anode |
| Diode type | 1 N 5408 |
| Max. operating voltage Umax | 250 V AC |
| Peak reverse voltage per diode | 1000 V |
| Reverse current per diode | 10 µA |
| Conducting state voltage per diode | approx. 0.8 V |
| Conducting state current per diode | 1.5 A (with single load) |
| Conducting state current per diode | 1 A (with simultaneous loads) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 22.5 mm |
| Height | 75 mm |
| Depth | 55 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
CE
| Certificate | CE-compliant |
| Note | and EN 61326 |
Standards and Regulations
| Standards/regulations | DIN EN 50178 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting Position | any |
Accessories
2947035 - Device marking label, width: 12 mm, area: 12 x 8 mm, e.g. for EML(10x7) R adhesive marking material
Why Proax for Phoenix Contact 2952211?
Proax is an authorized distributor of Phoenix Contact 2952211 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2948490 - EMG current monitoring with auxiliary voltage, primary current up to 15 A AC, "ON" switching threshold >0.75 A / OFF <0.25 A, 24 V DC supply voltage, 1 N/C contact output, 1 telltale- Module porte-relais, avec relais miniature, commande intégrée à transistor NPN pour courants de commande faibles, contact (AgNi 90/10) : puissances moyennes à fortes, 2 contacts NO, tension nominale de commande 24 V DC
2946133 - Electronic housing, with universal foot, for PCB insertion, without screw connection terminal blocks and cover
Electronic housing set, consisting of electronic housing and printed circuit termination blocks, pitch 5Electronic housing, with universal foot, for PCB insertion, without screw connection terminal blocks and coverPCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 4, connection method: Screw connection with tension sleeve,
2949677 - Indicator module,with 7 glow lamps and common return line, input voltage 110 - 230 V AC
2946159 - Covering hood, for the contact and dust-protected encapsulation of the components, in transparent design. Height: 7.5 mm, width: 22.5 mm
2946175 - Covering hood, for the contact and dust-protected encapsulation of the components, in green design. Height: 52 mm, width: 22.5 mm
Capot, pour protéger les composants contre les contacts fortuits et la poussière, version transparente. Hauteur : 35 mm, largeur : 22,5 mm
