Official DistributorSKU
Weight
0.083 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 22-B1-REL-G 24/TRN24-AND - Module à relais
Module porte-relais, avec relais miniature, commande intégrée à transistor NPN pour courants de commande faibles, contact (AgNi 90/10) : puissances moyennes à fortes, 2 contacts NO, tension nominale de commande 24 V DC
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Mechanical service life | 3x 107 cycles |
Insulation characteristics
| Insulation | Reinforced insulation |
Insulation characteristics: Air clearances and creepage distances, input/output
| Insulation | Reinforced insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Insulation characteristics: Air and creepage distances, output/output
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 0.5 W |
Air clearances and creepage distances, input/output
| Rated Insulation Voltage | 260 V |
| Rated surge voltage | 6 kV (1.2/50 μs) |
Air and creepage distances, output/output
| Rated Insulation Voltage | 260 V |
| Rated surge voltage | 2.2 kV (1.2/50 μs) |
Coil side
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 19.2 V DC ... 26.4 V DC (20 °C) |
| Typical input current at UN | 21 mA |
| Typical response time | 12 ms |
| Typical release time | 7 ms |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Protective circuit | Freewheeling diode; Freewheeling diode |
| Operating voltage display | LED |
Switching
| Contact switching type | Single contact, 2 N/O contact |
| Type of switch contact | Single contact |
| Contact Material | AgNi |
| Maximum Switching Voltage | 250 V AC |
| Limiting Continuous Current | 4 A |
| Interrupting rating (ohmic load) max. | 96 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 85 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 60 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 44 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 57 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 1000 VA (for 250 V AC) |
Coil side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Contact side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 22.5 mm |
| Height | 75 mm |
| Depth | 100 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Degree of Protection | IP20 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances, input/output
| Standards/regulations | DIN EN 50178: 1998-04 |
Air and creepage distances, output/output
| Standards/regulations | DIN EN 50178: 1998-04 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2298014?
Proax is an authorized distributor of Phoenix Contact 2298014 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 10 |
Recommended
2946162 - Covering hood, for the contact and dust-protected encapsulation of the components, in transparent design. Height: 15 mm, width: 22.5 mm
Capot, pour protéger les composants contre les contacts fortuits et la poussière, version transparente. Hauteur : 35 mm, largeur : 22,5 mm
2946175 - Covering hood, for the contact and dust-protected encapsulation of the components, in green design. Height: 52 mm, width: 22.5 mm
2946159 - Covering hood, for the contact and dust-protected encapsulation of the components, in transparent design. Height: 7.5 mm, width: 22.5 mm
2948490 - EMG current monitoring with auxiliary voltage, primary current up to 15 A AC, "ON" switching threshold >0.75 A / OFF <0.25 A, 24 V DC supply voltage, 1 N/C contact output, 1 telltale
2949677 - Indicator module,with 7 glow lamps and common return line, input voltage 110 - 230 V AC
Electronic housing set, consisting of electronic housing and printed circuit termination blocks, pitch 5Electronic housing, with universal foot, for PCB insertion, without screw connection terminal blocks and coverPCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 4, connection method: Screw connection with tension sleeve,
2946133 - Electronic housing, with universal foot, for PCB insertion, without screw connection terminal blocks and cover
