Official DistributorSKU
MPN
2952185
Weight
0.126 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 45-REL/IR-W230/HWR - Relay Module
Relay module, with soldered-in industrial relay, contact: 2 changeover contacts, for multi-input fault warnings, with input diode gate in P polarity (6 diodes 1N4007) and capacitor parallel to the coil as well as a multi-input LED display, input voltage 230 V AC
Technical Specifications
Notes
| Notes on operation | During installation, the system must be connected in phase. |
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | EMG |
| Application | Fault reporting system |
| Mechanical service life | > 107 cycles |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Maximum power dissipation for nominal condition | 3.68 W |
| Test voltage (Winding/contact) | 2 kV AC (50 Hz, 1 min., winding/contact) |
Diode
| Description of the input | 6 diodes, with P polarity |
| Diode type | 1 N 4007 |
| Max. operating voltage Umax | 250 V AC |
| Peak reverse voltage per diode | 1300 V |
| Reverse current per diode | 30 µA |
| Conducting state voltage per diode | approx. 0.8 V |
| Conducting state current per diode | 0.7 A (with single load) |
| Conducting state current per diode | 0.2 A (with simultaneous loads) |
Coil side
| Nominal input voltage UN | 230 V AC |
| Input voltage range | 207 V AC ... 253 V AC (20 °C) |
| Mains frequency | 50/60 Hz |
| Drive and function | monostable |
| Drive (polarity) | polarized |
| Typical input current at UN | approx. 16 mA |
| Typical response time | 5 ms ... 15 ms |
| Typical release time range | 15 ms ... 25 ms |
| Protective circuit | Decoupling diodes; Decoupling diodes |
| Protective circuit | Capacitor; Capacitor |
| Operating voltage display | LED red |
| Coil resistance | 19.5 kΩ |
| Nominal Power Consumption | approx. 1 VA |
Switching
| Contact switching type | 2 changeover contacts |
| Type of switch contact | Single contact |
| Contact Material | AgNi |
| Maximum Switching Voltage | 250 V AC |
| Maximum Switching Voltage | 110 V DC |
| Limiting Continuous Current | 3 A |
| Maximum Inrush Current | 5 A |
| Interrupting rating (ohmic load) max. | 750 VA |
Coil side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Contact side
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 45 mm |
| Height | 75 mm |
| Depth | 82.5 mm |
Material specifications
| Color | green (RAL 6021) |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
| Standards/regulations | DIN VDE 0110b, Gr. C for 250 V DC |
| Standards/regulations | DIN EN 50178/VDE 0160 (in relevant parts) |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | in rows with zero spacing |
| Mounting Position | any |
Why Proax for Phoenix Contact EMG 45-REL/IR-W230/HWR?
Proax is an authorized distributor of Phoenix Contact EMG 45-REL/IR-W230/HWR and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | EMG45RELIRW230HWR |
| Pack Size | 1 |
Recommended
2949376 - Relay module, with soldered-in industrial relay, contact: 2 changeover contacts, for multi-input fault warnings, with input diode gate in P polarity (6 diodes 1N4007) and capacitor parallel to the coil as well as a multi-input LED display, input voltage 24 V AC
2952172 - Relay module, with soldered-in industrial relay, contact: 2 changeover contacts, for multi-input fault signals, with input diode gate in P-polarity (6 diodes 1N4007) and capacitor parallel to the coil as well as a multi-input LED display, input voltage 24 V DC
2950666 - Relay module, with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts- 2950734 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 220 V DC, with LED display, freewheeling and polarity protection diode
- 2950721 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 110 V DC, with LED display, freewheeling and polarity protection diode
- 2950695 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 24-48 V DC, with LED display, freewheeling and polarity protection diode
- 2950718 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 60 V DC, with LED display, freewheeling and polarity protection diode
- 2950802 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 120-230 V AC, with LED display, freewheeling and polarity protection diode
- 2950763 - Relay module with plug-in base for KAMMRELAIS® size 2, contact: B 110, 4 changeover contacts, input voltage 24 V AC, with LED display, freewheeling and polarity protection diode
2950996 - Relay module, with 1 plug-in base for industrial relays size 1, contact: 4 changeover contacts, input voltage 24-48 V DC, with LED display, freewheeling and polarity protection diode
2943738 - Rail-mountable socket, with glow lamp and equipment fusing 5x 20 mm to max. 6.3 A; green housing
2940825 - Rail-mountable socket, with glow lamp and equipment fusing 5 x 20 mm to max. 6.3 A; yellow housing
2955807 - Fuse module with indicating pin, for 6 cartridge fuse inserts, 5x25 mm, individual connection
2952334 - Indicator module, with 14 red LEDs and common return line, input voltage 24 V DC
2946191 - Electronic housing, for PCB insertion, without screw connection terminal blocks and cover
2942315 - Electronic housing, for PCB insertion, without screw connection terminal blocks and cover, with open terminal space
