Official Distributor
SKU
MPN
EMG 45-REL/IR-G 24/HWR
Weight
0.129 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 45-REL/IR-G 24/HWR - Relay Module
Relay module, with soldered-in industrial relay, contact: 2 changeover contacts, for multi-input fault signals, with input diode gate in P-polarity (6 diodes 1N4007) and capacitor parallel to the coil as well as a multi-input LED display, input voltage 24 V DC
Technical Specifications
Product properties
Application | Fault reporting system |
Mechanical service life | > 107 cycles |
Insulation characteristics
Overvoltage category | II |
Pollution degree | 2 |
Electrical properties
Maximum power dissipation for nominal condition | 0.74 W |
Test voltage (Winding/contact) | 2 kV AC (50 Hz, 1 min., winding/contact) |
Diode
Description of the input | 6 diodes, with P polarity |
Diode type | 1 N 4007 |
Max. operating voltage Umax | 250 V AC |
Peak reverse voltage per diode | 1300 V |
Reverse current per diode | 30 µA |
Conducting state voltage per diode | approx. 0.8 V |
Conducting state current per diode | 0.7 A (with single load) |
Conducting state current per diode | 0.2 A (with simultaneous loads) |
Coil side
Nominal input voltage UN | 24 V DC |
Input voltage range | 20.4 V DC ... 26.4 V DC |
Input voltage range in reference to UN | 0.85 ... 1.1 |
Drive and function | monostable |
Typical input current at UN | approx. 31 mA |
Typical response time | approx. 14 ms |
Typical release time | approx. 16 ms |
Protective circuit | Decoupling diodes; Decoupling diodes |
Protective circuit | Capacitor; Capacitor |
Operating voltage display | LED red |
Coil resistance | 777 Ω |
Nominal Power Consumption | approx. 740 mW |
Switching
Contact switching type | Single contact, 2 changeover contacts |
Type of switch contact | Single contact |
Contact Material | AgNi |
Maximum Switching Voltage | 250 V AC/DC |
Limiting Continuous Current | 3 A |
Maximum Inrush Current | 5 A |
Interrupting rating (ohmic load) max. | 750 VA |
Coil side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Contact side
Connection Method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.2 mm² ... 4 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 12 |
Dimensions
Width | 45 mm |
Height | 75 mm |
Depth | 82.5 mm |
Material specifications
Color | green (RAL 6021) |
Ambient conditions
Ambient Temperature (Operation) | -20 °C ... 50 °C |
Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Standards and Regulations
Standards/regulations | DIN VDE 0110b, Gr. C for 250 V DC |
Standards/regulations | DIN EN 50178/VDE 0160 (in relevant parts) |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting Position | any |
Why Proax for Phoenix Contact 2952172?
Proax is an authorized distributor of Phoenix Contact 2952172 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 5 |
Recommended